Originally I (incorrectly?) assumed that since TX_COMMITMENT_SIGNED
always came before TX_SIGNATURES, we would always receive a response
from openchannel_update (w/ commitment_secured = true) before getting
notification of receipt of the peer's signatures.
But it's observable in the logs of hung tests that this in fact is a
wrong assumption -- the notification for the tx_sigs arrives at our
spender plugin before the callback from our openchannel_update RPC.
This mis-ordering causes a hang.
Luckily we're pretty much setup to handle this race already w/ states
etc, minus actually calling the method advance the plot in case we're
ready.
2022-07-26T05:37:59.4529095Z lightningd-1 2022-07-26T05:10:07.395Z DEBUG 035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d-dualopend-chan#2: peer_in WIRE_COMMITMENT_SIGNED
2022-07-26T05:37:59.4530452Z lightningd-1 2022-07-26T05:10:07.396Z DEBUG 035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d-hsmd: Got WIRE_HSMD_VALIDATE_COMMITMENT_TX
2022-07-26T05:37:59.4530719Z lightningd-1 2022-07-26T05:10:07.396Z DEBUG hsmd: Client: Received message 35 from client
2022-07-26T05:37:59.4531386Z lightningd-1 2022-07-26T05:10:07.396Z DEBUG 035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d-dualopend-chan#2: billboard: channel open: commitment received, sending to lightningd to save
2022-07-26T05:37:59.4531856Z lightningd-1 2022-07-26T05:10:07.398Z DEBUG 035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d-dualopend-chan#2: peer_in WIRE_TX_SIGNATURES
>>> 2022-07-26T05:37:59.4532553Z lightningd-1 2022-07-26T05:10:07.400Z DEBUG plugin-spenderp: mfc 60:`openchannel_peer_sigs` notice received for channel 9d145e763f08ee6f715ba7677f869cbb9580c7406f4d0b0ff3a0987efe501e13 <<<< THIS ONE WAS ASSUMED TO COME AFTER openchannel_update (next line)
2022-07-26T05:37:59.4533048Z lightningd-1 2022-07-26T05:10:07.400Z DEBUG plugin-spenderp: mfc 60, dest 0: openchannel_update 035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d returned.
2022-07-26T05:37:59.4554292Z lightningd-1 2022-07-26T05:10:07.400Z DEBUG plugin-spenderp: mfc 60: parallel `openchannel_update`.
2022-07-26T05:37:59.4555485Z lightningd-1 2022-07-26T05:10:07.400Z DEBUG plugin-spenderp: mfc 60: funding tx 50425e20dbf0ca6fe112a8811b8048edb5bfa8d2922079668c5f353b859b45cb
2022-07-26T05:37:59.4557934Z lightningd-1 2022-07-26T05:10:07.508Z DEBUG 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518-hsmd: Got WIRE_HSMD_CUPDATE_SIG_REQ
2022-07-26T05:37:59.4558244Z lightningd-1 2022-07-26T05:10:07.508Z DEBUG hsmd: Client: Received message 3 from client
2022-07-26T05:37:59.4558738Z lightningd-3 2022-07-26T05:11:03.234Z DEBUG 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518-gossipd: seeker: startup peer finished
2022-07-26T05:37:59.4559209Z lightningd-3 2022-07-26T05:11:03.234Z DEBUG 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518-gossipd: seeker: state = PROBING_SCIDS Seeking scids 1 - 105
(The last 2 log messages (from a different node) are >1min after the last
log line from lightning-1, because lightning-1 hung)
Hacked lightningd up to test this (such that notification always sent
before the RPC response, works as intended w/ patch)
We were cmd was getting free'd but holding on to reference of the
thing was causing problems.
==523280== Invalid read of size 8
==523280== at 0x1B3E14: del_notifier_property (tal.c:326)
==523280== by 0x1B3E14: tal_del_notifier_ (tal.c:569)
==523280== by 0x1123E7: handle_rpc_reply (libplugin.c:671)
==523280== by 0x1123E7: rpc_read_response_one (libplugin.c:866)
==523280== by 0x1123E7: rpc_conn_read_response (libplugin.c:886)
==523280== by 0x1A7B53: next_plan (io.c:59)
==523280== by 0x1A7B53: do_plan (io.c:407)
==523280== by 0x1A7B53: io_ready (io.c:417)
==523280== by 0x1A9BDB: io_loop (poll.c:453)
==523280== by 0x1141D0: plugin_main (libplugin.c:1708)
==523280== by 0x10D7E4: main (commando.c:937)
==523280== Address 0x52de928 is 8 bytes inside a block of size 40 free'd
==523280== at 0x483F0C3: free (vg_replace_malloc.c:872)
==523280== by 0x1B2CDD: del_tree (tal.c:419)
==523280== by 0x1B37BB: tal_free (tal.c:486)
==523280== by 0x1B37BB: tal_free (tal.c:474)
==523280== by 0x110CB2: command_complete (libplugin.c:255)
==523280== by 0x110CB2: command_done_err (libplugin.c:390)
==523280== by 0x10F511: handle_reply (commando.c:560)
==523280== by 0x10F511: handle_custommsg (commando.c:609)
==523280== by 0x113877: ld_command_handle (libplugin.c:1441)
==523280== by 0x113877: ld_read_json_one (libplugin.c:1491)
==523280== by 0x113877: ld_read_json (libplugin.c:1511)
==523280== by 0x1A7B53: next_plan (io.c:59)
==523280== by 0x1A7B53: do_plan (io.c:407)
==523280== by 0x1A7B53: io_ready (io.c:417)
==523280== by 0x1A9BDB: io_loop (poll.c:453)
==523280== by 0x1141D0: plugin_main (libplugin.c:1708)
==523280== by 0x10D7E4: main (commando.c:937)
==523280== Block was alloc'd at
==523280== at 0x483C855: malloc (vg_replace_malloc.c:381)
==523280== by 0x1B3BBD: allocate (tal.c:250)
==523280== by 0x1B3BBD: add_notifier_property (tal.c:303)
==523280== by 0x1B3BBD: tal_add_destructor2_ (tal.c:529)
==523280== by 0x110725: jsonrpc_request_start_ (libplugin.c:181)
==523280== by 0x10E0EA: send_more_cmd (commando.c:643)
==523280== by 0x11243C: handle_rpc_reply (libplugin.c:696)
==523280== by 0x11243C: rpc_read_response_one (libplugin.c:866)
==523280== by 0x11243C: rpc_conn_read_response (libplugin.c:886)
==523280== by 0x1A7B53: next_plan (io.c:59)
==523280== by 0x1A7B53: do_plan (io.c:407)
==523280== by 0x1A7B53: io_ready (io.c:417)
==523280== by 0x1A9BDB: io_loop (poll.c:453)
==523280== by 0x1141D0: plugin_main (libplugin.c:1708)
==523280== by 0x10D7E4: main (commando.c:937)
==523280==
{
<insert_a_suppression_name_here>
If rune contains invalid UTF-8, offers (which implements decode) would
produce JSON with invalid UTF-8, which causes lightningd to complain
and kill it, and then die because it's an important plugin.
So don't decode invalid UTF-8!
Reported-by: @jb55
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The error routine returns a string literal in this case, which we can't take().
Reported-by: @jb55
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is usually a signal that lightningd is shutting down, so notify
any instance that is waiting on `plugin.join()`.
Changelog-Fixed: cln-plugin: Fixed an issue where plugins would hang indefinitely despite `lightningd` closing the connection
Connectd already does this when we *receive* an error or warning, but
now do it on send. This causes some slight behavior change: we don't
disconnect when we close a channel, for example (our behaviour here
has been inconsistent across versions, depending on the code).
When connectd is told to disconnect, it now does so immediately, and
doesn't wait for subds to drain etc. That simplifies the manual
disconnect case, which now cleans up as it would from any other
disconnection when connectd says it's disconnected.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Disconnecting a peer after openingd fails is not instantaneous:
we abort the open, so openingd sends out a WIRE_ERROR which makes
connectd close the connection.
As a result this test fails often. The simplest fix is to wait for a
second in multifundchannel before retrying, which is also robust
against behaviour changes if we decide *not* to disconnect in future.
Also make sure that addrhint ownership is correct, since this can
lead to a use-after-free if we filter dests.
```
tests/test_connection.py::test_multifunding_best_effort FAILED [100%]
======================================================= FAILURES ========================================================
_____________________________________________ test_multifunding_best_effort _____________________________________________
node_factory = <pyln.testing.utils.NodeFactory object at 0x7f6c0c95c1c0>
bitcoind = <pyln.testing.utils.BitcoinD object at 0x7f6c0c92a880>
@pytest.mark.openchannel('v1')
@pytest.mark.developer("disconnect=... needs DEVELOPER=1")
def test_multifunding_best_effort(node_factory, bitcoind):
'''
Check that best_effort flag works.
'''
disconnects = ["-WIRE_INIT",
"-WIRE_ACCEPT_CHANNEL",
"-WIRE_FUNDING_SIGNED"]
l1 = node_factory.get_node()
l2 = node_factory.get_node()
l3 = node_factory.get_node(disconnect=disconnects)
l4 = node_factory.get_node()
l1.fundwallet(2000000)
destinations = [{"id": '{}@localhost:{}'.format(l2.info['id'], l2.port),
"amount": 50000},
{"id": '{}@localhost:{}'.format(l3.info['id'], l3.port),
"amount": 50000},
{"id": '{}@localhost:{}'.format(l4.info['id'], l4.port),
"amount": 50000}]
for i, d in enumerate(disconnects):
# Should succeed due to best-effort flag.
> l1.rpc.multifundchannel(destinations, minchannels=2)
tests/test_connection.py:2070:
...
> raise RpcError(method, payload, resp['error'])
E pyln.client.lightning.RpcError: RPC call failed: method: multifundchannel, payload: {'destinations': [{'id': '022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59@localhost:41023', 'amount': 50000}, {'id': '035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d@localhost:41977', 'amount': 50000}, {'id': '0382ce59ebf18be7d84677c2e35f23294b9992ceca95491fcf8a56c6cb2d9de199@localhost:34943', 'amount': 50000}], 'minchannels': 2}, error: {'code': 305, 'message': 'Peer not connected at start', 'data': {'id': '0382ce59ebf18be7d84677c2e35f23294b9992ceca95491fcf8a56c6cb2d9de199', 'method': 'fundchannel_start'}}
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a bit weird since it lives in the offers plugin, but it works
well. This should make runes much more approachable for people!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I'm assuming that nobody wants a rate slower than 1 per minute; we can
introduce 'drate' if we want a per-day kind of limit.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We support the old commando.py plugin, which stores a random secret,
as well as a more modern approach which uses makesecret.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is needed for invoice, which can be asked to commit to giant descriptions
(though that's antisocial!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au
Changelog-Added: Plugins: `commando` a new builtin plugin to send/recv peer commands over the lightning network, using runes.
Plugins are supposed to store their data in the datastore, and commando does so:
let's make it easier for them by providing convenience APIs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rather than a generic "add member", provide two routines: one which
doesn't quote, and one which does.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have them split over common/param.c, common/json.c,
common/json_helpers.c, common/json_tok.c and common/json_stream.c.
Change that to:
* common/json_parse (all the json_to_xxx routines)
* common/json_parse_simple (simplest the json parsing routines, for cli too)
* common/json_stream (all the json_add_xxx routines)
* common/json_param (all the param and param_xxx routines)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes#5271
In-Collaboration-With: Base58 'n Coding Seminar Participants
Changelog-Changed: `fundchannel` now errors if you try to buy a liquidity ad but dont' have `experimental-dual-fund` enabled
The direction only depends on the ordering between node_ids, not the
short_channel_id, so we can include it and it won't change. This was
causing some trouble loading the `channel_hints` in the `pay` plugin.
This will eventually enable us to specify 0 for zeroconf channels.
Changelog-Added: JSON-RPC: Added `mindepth` argument to specify the number of confirmations we require for `fundchannel` and `multifundchannel`
Represents the "configuration" part of the "init" message during
plugin initialization.
Changelog-Added: cln_plugin: persist cln configuration from init msg
This code was buggy: handing "1000" as a parameter to
min_their_funding_msat, don't turn that into "1000sat"!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
niftynei
Rusty Russell
Christian Decker
adi2011
Simon Vrouwe
Justin Moon