Changelog-Fixed: check if the pass and the confirmation pass match from the command line
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
This was missed in e8d2176e6b.
```
> raise ValueError(str(errors))
E ValueError:
E Node errors:
E - lightningd-2: had bad gossip messages
E - lightningd-3: had bad gossip messages
E Global errors:
contrib/pyln-testing/pyln/testing/fixtures.py:201: ValueError
...
0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518-gossipd: Ignoring future channel_announcment for 105x1x2 (current block 104)
0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518-gossipd: Bad gossip order: WIRE_CHANNEL_UPDATE before announcement 105x1x2/0
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This avoids reuse which can cause confusion; the long-term fix is to
rewrite this to use real channels like dualfunding does.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Make sure it sees disconnect before reconnect, otherwise the next command
fails since we're now disconnected.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Simply exit, like we do when master daemon_conn exits.
```
Valgrind error file: valgrind-errors.2211908
==2211908== Invalid read of size 8
==2211908== at 0x12AC13: daemon_conn_send (daemon_conn.c:137)
==2211908== by 0x113CD9: queue_peer_msg (gossipd.c:118)
==2211908== by 0x11B806: query_channel_range (queries.c:1169)
==2211908== by 0x1250DD: peer_gossip_probe_scids (seeker.c:706)
==2211908== by 0x1253B1: check_firstpeer (seeker.c:788)
==2211908== by 0x1256CA: seeker_check (seeker.c:884)
==2211908== by 0x1366AC: timer_expired (timeout.c:62)
==2211908== by 0x1163D1: main (gossipd.c:1146)
==2211908== Address 0x4cafdf0 is 48 bytes inside a block of size 88 free'd
==2211908== at 0x48460C4: free (vg_replace_malloc.c:872)
==2211908== by 0x1805EA: del_tree (tal.c:421)
==2211908== by 0x1808BE: tal_free (tal.c:486)
==2211908== by 0x12AB25: destroy_dc_from_conn (daemon_conn.c:112)
==2211908== by 0x17FFDF: notify (tal.c:237)
==2211908== by 0x180519: del_tree (tal.c:402)
==2211908== by 0x1808BE: tal_free (tal.c:486)
==2211908== by 0x16EE9A: io_close (io.c:450)
==2211908== by 0x16ECA9: do_plan (io.c:401)
==2211908== by 0x16ED16: io_ready (io.c:417)
==2211908== by 0x1710B2: io_loop (poll.c:453)
==2211908== by 0x1163C5: main (gossipd.c:1144)
==2211908== Block was alloc'd at
==2211908== at 0x484384F: malloc (vg_replace_malloc.c:381)
==2211908== by 0x180064: allocate (tal.c:250)
==2211908== by 0x180634: tal_alloc_ (tal.c:428)
==2211908== by 0x12AB65: daemon_conn_new_ (daemon_conn.c:122)
==2211908== by 0x1155F4: gossip_init (gossipd.c:763)
==2211908== by 0x116014: recv_req (gossipd.c:999)
==2211908== by 0x12A828: handle_read (daemon_conn.c:31)
==2211908== by 0x16E09F: next_plan (io.c:59)
==2211908== by 0x16ECD4: do_plan (io.c:407)
==2211908== by 0x16ED16: io_ready (io.c:417)
==2211908== by 0x1710B2: io_loop (poll.c:453)
==2211908== by 0x1163C5: main (gossipd.c:1144)
==2211908==
```
We may not see a disconnect instantly:
```
> assert len(l2.rpc.listpeers()['peers']) == 0
E assert 1 == 0
E +1
E -0
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Update the address and direction as soon as it connects not just when
we're about to make it active: we want this even if we don't have
an active channel, or if the connect hook rejects it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is generally verboten now, since there can be multiple. There are a
few exceptions:
1. We sometimes want to know if there are *any* active channels.
2. Some dev commands still take peer id when they mean channel_id.
3. We still allow peer id when it's fully determined.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `close` by peer id will fail if there is more than one live channel (use `channel_id` or `short_channel_id` as id arg).
More efficient to search a known peer than the whole set.
Also, move find_channel_by_id() from channel_control.c into channel.c
where we'd expect it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Sure, we want to connect (usually) because of an active channel, but
it's not specific to the channel itself.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Activate means a specific thing now (connectd said something), so avoid
confusing it with this function.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Generally this means converting a lazy "peer_active_channel(peer)" call
into an explicit iteration.
1. notify_feerate_change: call all channels (ignores non-active ones anyway).
2. peer_get_owning_subd remove unused function.
3. peer_connected hook: don't save channel, do lookup and iterate channels.
4. In json_setchannelfee "all" remove useless call to peer_active_channel
since we check state anyway, and iterate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rather than intuiting whether this is a new channel / active channel,
use the channel_id. This simplifies things and makes them explicit,
and prepares for multiple live channels per peer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means doing some wire interpretation, and handling the transient
case where we switch from temporary to permenant channel_id, but it's
not that bad (and required for accurate demux when multiple channels
are involved for a single peer).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now we always have it (either extracted from an unsolicited message,
or told to us by lightningd when it tells us it wants to talk), we can
always send it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means lightningd needs to create the temporary one and tell it to
openingd/dualopend, rather than the other way around.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't need to hand it to channeld: it will read it! We simply
need to tell it to expect it.
Similarly, openingd/dualopend will never see it, so remove that logic.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Either because lightningd tells us it wants to talk, or because the peer
says something about a channel.
We also introduce a behavior change: we disconnect after a failed open.
We might want to modify this later, but we it's a side-effect of openingd
not holding onto idle connections.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We would return success from connect even though the peer was closing;
this is technically correct but fairly undesirable. Better is to pass
every connect attempt to connectd, and have it block if the peer is
exiting (and retry), otherwise tell us it's already connected.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
openingd currently holds the connection to idle peers, but we're about
to change that: it will only look after peers which are actively
opening a connection. We can start this process by disconnecting
whenever we have a negotiation failure.
We could stay connected if we wanted to, but that would be up to
connectd to decide. Right now it's easier if we disconnect from any
idle peer once it's been active.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The message from lightningd simply acknowleges that we are allowed to
discard the peer (because no subdaemons are talking to it anymore).
This difference becomes more stark once connectd holds on to idle
peers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. The notification should be called every time.
2. channel can never be NULL, since it's tested above.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: JSON-RPC: `connect` notification now called even if we already have a live channel.
Use tmpctx, rather than freeing manually everywhere (proof: next patch
added a branch and forgot to free it!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This happens when we send a warning or lightningd tells us to send a
final message then close. Normally io logging is done by the
subdaemon that creates it, but this is a special case.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We currently intuit this by whether there's a subdaemon owning it.
But we're about to change the rules and allow connectd to hold idle
connections, so we need an explicit flag.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Turns out that the pyln-proto dependency in the bolt packages is only
needed for testing, not for production. Making it a dev-dependency
means it isn't considered in resolution anymore.
Since the bolt, testing and client packages are to be used outside
from the project we can't use relative dependencies either, so make
then dependent on the version on PyPI. This also means we had to push
a couple of updated to PyPI.
Changelog-None
Suggested by @m-schmook, I realized that if we append it later I'll
never get it right: I expect parameters min and max, not max and min!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: you can now alter the `htlc_minimum_msat` and `htlc_maximum_msat` your node advertizes.
We still use the channel hint here (as it's the only option), we just
warn about lack of capacity.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to add some, since our internal representations of
htlc_maximum_msat round up, and we need to disable mpp which succeeds
in getting a payment through by splitting.
We also allow dev_routes to suppress invoice routehints altogether.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Vincenzo Palazzo
Rusty Russell
Christian Decker