```
make check-source-bolt CHECK_BOLT_PREFIX="--prefix=BOLT-offers" BOLTVERSION=guilt/offers
```
In this case, only trivial mods.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is how we put new invoice_requests into the db; this will be used
by a new "invoicerequest" command which replaces "offerout".
The API is now the same as the offers api.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We no longer have to refer back to the offer for which we're making
the invoice_request, or to the invoice_request we made for an invoice,
as they are all mirrored (and we check!).
It's clearer to simply look at the object directly.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I know this is an unforgivably large diff, but the spec has changed so
much that most of this amounts to a rewrite.
Some points:
* We no longer have "offer_id" fields, we generate that locally, as all
offer fields are mirrored into invoice_request and then invoice.
* Because of that mirroring, field names all have explicit offer/invreq/invoice
prefixes.
* The `refund_for` fields have been removed from spec: will re-add locally later.
* quantity_min was removed, max == 0 now mean "must specify a quantity".
* I have put recurrence fields back in locally.
This brings us to 655df03d8729c0918bdacac99eb13fdb0ee93345 ("BOLT 12:
add explicit invoice_node_id.")
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We had a scheme where lightningd itself would put a per-node secret in
the blinded path, then we'd tell the caller when it was used. Then it
simply checks the alias to determine if the correct path was used.
But this doesn't work when we start to offer multiple blinded paths.
So go for a far simpler scheme, where the secret is generated (and
stored) by the caller, and hand it back to them.
We keep the split "with secret" or "without secret" API, since I'm
sure callers who don't care about the secret won't check that it
doesn't exist! And without that, someone can use a blinded path for a
different message and get a response which may reveal the node.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We actually want lightningd to create these, since it wants to put the
path_id secret in the last element. So best API is actually a generic
one, rather than separate APIs to create first and last ones.
And really, the more explicit initialization makes the users clearer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Mainly, field name changes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: Protocol: Support for forwarding blinded payments (as per latest draft)
It's 2b7ad577d7a790b302bd1aa044b22c809c76e49d, which reverts the
point32 changes.
It also restores send_invoice in `invoice`, which we had removed
from spec and put into the recurrence patch.
I originally had implemented compatibility, but other changes
which followed this are far too widespread.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: offers: complete rework of spec from other teams (yay!) breaks previous compatibility (boo!)
We have them split over common/param.c, common/json.c,
common/json_helpers.c, common/json_tok.c and common/json_stream.c.
Change that to:
* common/json_parse (all the json_to_xxx routines)
* common/json_parse_simple (simplest the json parsing routines, for cli too)
* common/json_stream (all the json_add_xxx routines)
* common/json_param (all the param and param_xxx routines)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The name in the spec is `msat`, but I don't want to make an API exception.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `fetchinvoice` `changes` `amount_msat`
Changelog-Deprecated: JSON-RPC: `fetchinvoice` `changes` `msat` (use `amount_msat`)
This is consistent with our output changes, and increases consistency.
It also keeps future sanity checks happy, that we only use JSON msat
helpers with '_msat' fields.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `invoice`, `sendonion`, `sendpay`, `pay`, `keysend`, `fetchinvoice`, `sendinvoice`: `msatoshi` argument is now called `amount_msat` to match other fields.
Changelog-Deprecated: JSON-RPC: `invoice`, `sendonion`, `sendpay`, `pay`, `keysend`, `fetchinvoice`, `sendinvoice` `msatoshi` (use `amount_msat`)
I removed these prematurely: we *haven't* had a release since
introducing them!
This consists of reverting d15d629b8b
"plugins/fetchinvoice: remove obsolete string-based API." and
plugins/fetchinvoice: remove obsolete string-based
API. "onion_messages: remove obs2 support."
Some minor changes due to updated fromwire_tlv API since they
were removed, but not much.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: REVERT: Removed backwards compat with onion messages from v0.10.1.
Requiring the caller to allocate them is ugly, and differs from
other types.
This means we need a context arg if we don't have one already.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
No more "towire_offer", but "towire_tlv_offer".
This means we double-up on the unfortunately-named `tlv_payload` inside
the onion, but we should rename that in the spec when we remove
old payloads.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, this changes the name of a field in invoice_request:
`payer_signature` becomes simply `signature`. So we allow both for
now, and send the old one unless deprecated_apis is disabled.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And turn "" includes into full-path (which makes it easier to put
config.h first, and finds some cases check-includes.sh missed
previously).
config.h sets _GNU_SOURCE which really needs to be done before any
'#includes': we mainly got away with it with glibc, but other platforms
like Alpine may have stricter requirements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As of 2b923a0367c5f9154fcec706e3302cc4658dd889.
Recurrence quotes need to be marked separately, since they're no longer
in offers main bolt.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's very similar to the previous, but there are a few changes:
1. The enctlv fields are numbered differently.
2. The message itself is a different number.
The onionmsg_path type is the same, however, so we keep that constant
at least.
The result is a lot of cut & paste, but we will delete the old one
next release.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Temporarily disable sendpay_blinding test which uses obsolete onionmsg;
there's still some debate on the PR about how blinded HTLCs will work.
Changelog-EXPERIMENTAL: onionmessage: removed support for v0.10.1 onion messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We keep the now-removed chains field, and in deprecated mode, we set it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: bolt12: `chains` in invoice_request and invoice is deprecated, `chain` is used instead.
Main changes are:
1. Uses point32 instead of pubkey32.
2. Uses issuer instead of vendor.
3. Uses byte instead of u8.
4. blinded_path num_hops is now a byte, not u16 (we don't use that yet!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: bolt12: `vendor` is deprecated: the field is now called `issuer`.
This comes in via the onion_message_ourpath hook, and we identify the
path by checking the node alias it came to (vs the obsolete version
which used the blinding).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We had sent->path be a list of node_ids, but it makes more sense as
pubkeys so we can avoid conversion. Also, I find it easier to think
about (especially creating backwards paths) if we include *ourselves*
as the first element in the path.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
sendonionmessage is going to be the new one, and do much *less*.
As this is an internal experimental-only API, no deprecation cycle
required.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
offers contain an x-only pubkey: to route to them to need to know the
02 vs 03 prefix. If they're in the gossmap it's easy, but if they're
a directly-connected peer it's harder. We used to have
sendonionmessage tweak the key if it found a peer with the matching
key, but this was always a hack.
It turns out that we try to connect to the node anyway, which is
a noop if it's already connected. So try connecting to the other
parity if the first one fails.
Also, this registers when we fail to connect, and returns an error
rather than waiting for timeout.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before:
Ten builds, laptop -j5, no ccache:
```
real 0m36.686000-38.956000(38.608+/-0.65)s
user 2m32.864000-42.253000(40.7545+/-2.7)s
sys 0m16.618000-18.316000(17.8531+/-0.48)s
```
Ten builds, laptop -j5, ccache (warm):
```
real 0m8.212000-8.577000(8.39989+/-0.13)s
user 0m12.731000-13.212000(12.9751+/-0.17)s
sys 0m3.697000-3.902000(3.83722+/-0.064)s
```
After:
Ten builds, laptop -j5, no ccache: 8% faster
```
real 0m33.802000-35.773000(35.468+/-0.54)s
user 2m19.073000-27.754000(26.2542+/-2.3)s
sys 0m15.784000-17.173000(16.7165+/-0.37)s
```
Ten builds, laptop -j5, ccache (warm): 1% faster
```
real 0m8.200000-8.485000(8.30138+/-0.097)s
user 0m12.485000-13.100000(12.7344+/-0.19)s
sys 0m3.702000-3.889000(3.78787+/-0.056)s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't automatically *reject* an invoice which asks for a different
msat than we specified (caller may!), but we don't bother noting it
unless it is different.
Reported-by: @shesek
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
@shesek points out that we called this field created_at in bolt11 decode,
which makes more sense anyway.
Changelog-EXPERIMENTAL: bolt12 decode `timestamp` field deprecated in favor of new name `created_at`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Michael Dance