If you miss a wait event, you can catch up by doing listinvoices and
getting the max of these fields. It's also a good debugging clue.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now we have defined ordering, we can add a start param.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listinvoices` has `index` and `start` parameters for listing control.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `setchannel` adds a new `ignorefeelimits` parameter to allow peer to set arbitrary commitment transaction fees on a per-channel basis.
Rune functionality moved into core from commando plugin.
Changelog-Added: JSON-RPC: `checkrune`: check rune validity for authorization; `createrune` to create/modify rune; `listrunes` to list existing runes; `blacklistrune` to revoke permission of rune
Changelog-Deprecated: JSON-RPC: `commando-rune`, `commando-listrunes` and `commando-blacklist`.
No-schema-diff-check
This is needed when we know we're *opening* an anchor channel, to
override the "do we already have an anchor channel open?" logic.
Also, document the nonwrapped arg added in v23.02.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `fundpsbt` and `utxopsbt` new parameter `opening_anchor_channel` so lightningd knowns it needs emergency reserve for anchors.
For anchors, we need some sats sitting around in case we need to CPFP
a close.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Config: `min-emergency-msat` setting for (currently experimental!) anchor channels, to keep funds in reserve for forced closes.
We disabled experimental support for opening non-zero-fee anchor
channels (though old nodes may still have such channels if they turned
that on!).
So we simply call this `experimental-anchors`, since this is the variant
which we expect to be used widely.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: protocol: added support for zero-fee-htlc anchors (`option_anchors_zero_fee_htlc_tx`), using `--experimental-anchors`.
Since we can CPFP, we don't have to track the feerate as closely. But
it still needs to get in the mempool, so we use 10 sat/byte, or the
100 block estimate if that is higher.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `feerates` has new fields `unilateral_anchor_close` to show the feerate used for anchor channels (currently experimental), and `unilateral_close_nonanchor_satoshis`.
Changelog-Changed: JSON-RPC: `feerates` `unilateral_close_satoshis` now assumes anchor channels if enabled (currently experimental).
It depends on whether we negotiated anchors: just document that this
field doesn't apply for anchors (it becomes zero by the end of this
patch series, which is weird).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently only implemented for min-capacity-sat.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: new command `setconfig` allows a limited number of configuration settings to be changed without restart.
To test, we do min-capacity-sat which is simple. We also update the
listconfigs man page which contained some obsolete information.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSON-RPC: `listconfigs` direct fields, use `configs` sub-object and `set`, `value_bool`, `value_str`, `value_int`, or `value_msat` fields.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use multi-specifiable options elsewhere, this is just another.
Otherwise you can't add, you can only set them all.
Changelog-Added: Config: `accept-htlc-tlv-type` (replaces awkward-to-use `accept-htlc-tlv-types`)
Changelog-Deprecated: Config: `accept-htlc-tlv-types` (use `accept-htlc-tlv-type` multiple times)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
listconfigs is convenient, but it doesn't handle multi-options well: it
outputs an object with duplicate fields in this case (e.g. log-file), nor
is it extensible to show more than raw values.
However, listconfigs doesn't do what other list commands do (use a
sub-object "configs") so we can put the new values under that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listconfigs` now has `configs` subobject with more information about each config option.
This obsoletes the use of --announce-addr-dns which I know Michael
didn't really like either.
Changelog-Deprecated: Config: `announce-addr-dns`; use `--bind-addr=dns:ADDR` for finer control.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And no longer insist on opt_quiesce.
Changelog-EXPERIMENTAL: Config: `--experimental-upgrade-protocol` enables simple channel upgrades.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I tested this indeed breaks if we don't accept it, then implemented
the code to accept it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: protocol: We now correctly accept the `option_scid_alias` bit in `open_channel` `channel_type`.
Changelog-Deprecated: protocol: Not setting `option_scid_alias` in `option_channel` `channel_type` for unannounced channels.
Changelog-Added: JSON-RPC: `feerates`: added `floor` field for current minimum feerate bitcoind will accept
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Drop try_get_feerate() in favor of explicit feerate_for_deadline() and
smoothed_feerate_for_deadline().
This shows us everywhere we deal with old-style feerates by names.
`delayed_to_us` and `htlc_resolution` will be moving to dynamic fees,
so deprecate those.
Note that "penalty" is still used for generating penalty txs for
watchtowers, and "unilateral_close" still used until we get zero-fee
anchors.
Changelog-Added: JSON-RPC: `feerates` `estimates` array shows fee estimates by blockcount from underlying plugin (usually *bcli*).
Changelog-Changed: JSON-RPC: `close`, `fundchannel`, `fundpsbt`, `multifundchannel`, `multiwithdraw`, `txprepare`, `upgradewallet`, `withdraw` `feerate` (`feerange` for `close`) value *slow* is now 100 block-estimate, not half of 100-block estimate.
Changelog-Deprecated: JSON-RPC: `close`, `fundchannel`, `fundpsbt`, `multifundchannel`, `multiwithdraw`, `txprepare`, `upgradewallet`, `withdraw` `feerate` (`feerange` for `close`) expressed as, "delayed_to_us", "htlc_resolution", "max_acceptable" or "min_acceptable". Use explicit block counts or *slow*/*normal*/*urgent*/*minimum*.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we're messing with feerates, it's good to test this directly upfront.
Also, fix documentation!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Turns out the two bcli replacements I checked (`sauron` and
`trustedcoin`) don't even implement this, and the multiplier makes
more sense in lightningd, especially as we move to bcli just providing
raw feerate estimates.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listclosedchannels` to show old, dead channels we previously had with peers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As reported on Discord, these are undocumented. And thus, um, hard to find!
Reported-by: Aaron Barnard
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These were deprecated in v0.12.0, hence scheduled for removal next version anyway
(use local_fund_msat and remote_funds_msat).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since it's not spec-final yet (hell, it's not even properly specified
yet!) we need to put it behind an experimental flag.
Unfortunately, we don't have support for doing this in a plugin; a
plugin must present features before parsing options. So we need to do
it in core.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Though there's already a `createinvoice` command, there are usecases where a
user may want to sign an invoice that they don't yet have the preimage to. For
example, they may have an htlc_accepted plugin that pays to obtain the preimage
from someone else and returns a `{ "result": "resolve", ... }`.
This RPC command addresses this usecase without overly complicating the
semantics of the existing `createinvoice` command.
Changelog-Added: JSON-RPC: `signinvoice` new command to sign BOLT11
invoices.
Rusty Russell
Shahana Farooqui
Greg Sanders
Christian Decker
Kristaps Kaupe
Alex Myers
Carl Dong
niftynei
Michael Schmoock
Carl Dong