This fixes lightningd's chronic weight underestimate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: closingd: more accurate weight estimation helps mutual closing near min/max feerates.
The blockheight is zero though, since these aren't included in a block
yet.
We also don't issue an 'external' deposit event if we can tell that the
address you're sending to actually belongs to our wallet (we'll issue a
deposit event when it gets included in a block)
```
l1.rpc.disconnect(l2.info['id'], force=True)
l1.rpc.connect(l2.info['id'], 'localhost', l2.port)
> l1.daemon.wait_for_log('option_static_remotekey enabled at 2/2')
tests/test_connection.py:3653:
```
If l2's channeld gets killed (due to reconnect) before it tells
lightningd it got the revoke_and_ack it will need a retransmission
*again*.
This makes the test more robust, and does more checks too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
OK, now this test makes more sense! Now we don't ignore errors, we
*will* drop to chain if we reconnect after one side has dropped to
chain.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's actually a bug in our closing tx size estimation; I'll do
a separate patch for this, though.
Seems this used to be flaky, now we always flush queues, so it's
more reliably caught.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We seem to hit a race between manual reconnect (with address hint) and an automatic
reconnection attempt which fails:
```
> l4.rpc.connect(l3.info['id'], 'localhost', l3.port)
...
E pyln.client.lightning.RpcError: RPC call failed: method: connect, payload: {'id': '035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d', 'host': 'localhost', 'port': 41285}, error: {'code': 401, 'message': 'All addresses failed: 127.0.0.1:36678: Connection establishment: Connection refused. '}
```
See how it didn't even try the given address?
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
l1 might split in a commitment_signed before it notices the disconnect, and this test fails:
```
for i in range(0, len(disconnects)):
with pytest.raises(RpcError):
l1.rpc.sendpay(route, rhash, payment_secret=inv['payment_secret'])
> l1.rpc.waitsendpay(rhash)
E Failed: DID NOT RAISE <class 'pyln.client.lightning.RpcError'>
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We now let gossipd do it.
This also means there's nothing left in 'struct per_peer_state' to
send across the wire (the fds are sent separately), so that gets
removed from wire messages too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We actually intercept the gossip_timestamp_filter, so the gossip_store
mechanism inside the per-peer daemon never kicks off for normal connections.
The gossipwith tool doesn't set OPT_GOSSIP_QUERIES, so it gets both, but
that only effects one place.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
channeld can't do it any more: it's using local sockets. Connectd
can do it, and simply does it by type.
Amazingly, on my machine the timing change *always* caused
test_channel_receivable() to fail, due to a latent race.
Includes feedback from @cdecker.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As connectd handles more packets itself, or diverts them to/from gossipd,
it's the only place we can implement the dev_disconnect logic.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This test started mostly failing (in non-DEVELOPER mode) after the
next patch, due to timing issues.
Handle both cases for now, and we'll add more enhancements later to
things we should be handling more consistently.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I also got an error under CI; it seems the sleep() was insufficient.
So try adding a sleep inside the check_coin_moves, which should cover
everyone.
```
acct_moves = acct_moves[number_moves:]
else:
> if not move_matches(m, acct_moves[0]):
E IndexError: list index out of range
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Once connectd is doing this, we can't close as soon as we send,
and in fact we can't do 'fail write' either.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These would have to be done by connectd, not the local daemon, once it's
intermediating. Otherwise the remote peer won't see any change.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fire off a snapshot of current account balances (node wallet + every
'active' channel) after we've caught up to the chain tip for the *first*
time (in other words, on start).
We need to stash/save the amount of the lease fees on a leased channel,
we do this by re-using the 'push' amount field on channel (which is
technically correct, since we're essentially pushing the fee amount to
the peer).
Also updates a bit of how the pushes are accounted for (pushed to now
has an event; their channel will open at zero but then they'll
immediately register a push event).
Leases fees are treated exactly the same as pushes, except labeled
differently.
Required adding a 'lease_fee' field to the inflights so we keep track of
the fee for the lease until the open happens.
If we initialized the payment, the fees are the entire fee-chain
(final hop amount - starting hop amount)
If it's a payment we routed, the fees are the diff between the
inbound htlc and the outbound (net gain by this routing)
Added to database so data persists nicely.
We record the amount of fees collected for a routed payment. For
simplicity's sake on the data agg side, we record the fee payment on
*BOTH* the incoming htlc and the outgoing htlc. Note that this results
in double counting if you add up the fees from both an in-routed and
out-routed payment.
Get rid of the 'movement_idx', since we replay events now.
Since we're removing a field from the 'coin_movement' event emission, we
bump the version type.
Changelog-Updated: `coin_movements` events have been revamped and are now on version 2.
test_onchain_dust_out restarts a node, which produces duplicate events.
this is expected, but we need to de-duplicate the events stream to get
accurate results
The old model of coin movements attempted to compute fees etc and log
amounts, not utxos. This is not as robust, as multi-party opens and dual
funded channels make it hard to account for fees etc correctly.
Instead, we move towards a 'utxo' view of the onchain events. Every
event is either the creation or 'destruction' of a utxo. For cases where
the value of the utxo is not (fully) debited/credited to our account, we
also record the output_value. E.g. channel closings spend a utxo who's
entire value we may not own.
Since we're now tracking UTXOs onchain, we can now do more complex
assertions about the onchain footprint of them. The integration tests
have been updated to now use more 'chain aware' assertions about the
ending state.
Suggested-by: Rusty Russell
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Changelog-Changed: Support hsm specific error error code in lightning-cli
1. Adds the missing DNS error massages so they can be handled by
connect_control.
2. Prepends a 'All addresses failed' to code 401 message, so we
always have at least some error message to the user.
Changelog-None
The last line of the testcase was checking on the wrong node l3
instead of l1. l3 didn't had the plugins configured that would
produce the log entry we were looking for not to be present.
Changelog-None
The idea is to have different default ports for different networks.
Current default port is `9735` for everything. Let's use it for
the mainnet and reuse the difference added to the default port
from `rpc_port` values in `bitcoin/chainstate.c`.
Testnet would be `19735` (adding rpc_port - 8332 = `10000`).
Signet would be `39735` (adding rpc_port - 8332 = `30000`).
Regtest would be `19846` (adding rpc_port - 8332 = `10111`).
With Vincenzo's kind pair-programming help over tmate.
Two other commits were squashed into this one so that bisecting
never ends up in half-baked state:
1. chainparams: Fix regtest default rpc_port
bitcoind -help says this:
-rpcport=<port>
Listen for JSON-RPC connections on <port> (default: 8332, testnet:
18332, signet: 38332, regtest: 18443)
2. test_gossip: Default port for regtest
hex: 2607 is now .... (could be 4d86 but Elements uses another port)
dec: 9735 is now any port (could be 19846 ^^ but now is for any port)
The lines which were binding to default port were removed as the
default port is different on each network.
NOTE: Remember not to modify gossip_store tests which loads everything raw
including the checksums.
Changelog-Changed: If the port is unspecified, the default port is chosen according to used network similarly to Bitcoin Core.
And turn "" includes into full-path (which makes it easier to put
config.h first, and finds some cases check-includes.sh missed
previously).
config.h sets _GNU_SOURCE which really needs to be done before any
'#includes': we mainly got away with it with glibc, but other platforms
like Alpine may have stricter requirements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We make sure the gossip msg was sent, but the other node might not
have digested it yet:
```
# Check other node can parse these
> addresses = l2.rpc.listnodes(l1.info['id'])['nodes'][0]['addresses']
E KeyError: 'addresses'
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Temporarily disable sendpay_blinding test which uses obsolete onionmsg;
there's still some debate on the PR about how blinded HTLCs will work.
Changelog-EXPERIMENTAL: onionmessage: removed support for v0.10.1 onion messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
shutdown_subdaemons frees the channel and calls destroy_close_command_on_channel_destroy, see gdb:
0 destroy_close_command_on_channel_destroy (_=0x55db6ca38e18, cc=0x55db6ca43338) at lightningd/closing_control.c:94
1 0x000055db6a8181b5 in notify (ctx=0x55db6ca38df0, type=TAL_NOTIFY_FREE, info=0x55db6ca38e18, saved_errno=0) at ccan/ccan/tal/tal.c:237
2 0x000055db6a8186bb in del_tree (t=0x55db6ca38df0, orig=0x55db6ca38e18, saved_errno=0) at ccan/ccan/tal/tal.c:402
3 0x000055db6a818a47 in tal_free (ctx=0x55db6ca38e18) at ccan/ccan/tal/tal.c:486
4 0x000055db6a73fffa in shutdown_subdaemons (ld=0x55db6c8b4ca8) at lightningd/lightningd.c:543
5 0x000055db6a741098 in main (argc=21, argv=0x7ffffa3e8048) at lightningd/lightningd.c:1192
Before this PR, there was no io_loop after shutdown_subdaemons and client side raised a
general `Connection to RPC server lost.`
Now we test the more specific `Channel forgotten before proper close.`, which is good!
BTW, this test was added recently in PR #4599.
Rusty Russell
niftynei
Michael Schmoock
Vincenzo Palazzo
Simon Vrouwe
Jan Sarenik
Andrew Toth