We now let gossipd do it.
This also means there's nothing left in 'struct per_peer_state' to
send across the wire (the fds are sent separately), so that gets
removed from wire messages too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We actually intercept the gossip_timestamp_filter, so the gossip_store
mechanism inside the per-peer daemon never kicks off for normal connections.
The gossipwith tool doesn't set OPT_GOSSIP_QUERIES, so it gets both, but
that only effects one place.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As connectd handles more packets itself, or diverts them to/from gossipd,
it's the only place we can implement the dev_disconnect logic.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Adds the missing DNS error massages so they can be handled by
connect_control.
2. Prepends a 'All addresses failed' to code 401 message, so we
always have at least some error message to the user.
Changelog-None
The idea is to have different default ports for different networks.
Current default port is `9735` for everything. Let's use it for
the mainnet and reuse the difference added to the default port
from `rpc_port` values in `bitcoin/chainstate.c`.
Testnet would be `19735` (adding rpc_port - 8332 = `10000`).
Signet would be `39735` (adding rpc_port - 8332 = `30000`).
Regtest would be `19846` (adding rpc_port - 8332 = `10111`).
With Vincenzo's kind pair-programming help over tmate.
Two other commits were squashed into this one so that bisecting
never ends up in half-baked state:
1. chainparams: Fix regtest default rpc_port
bitcoind -help says this:
-rpcport=<port>
Listen for JSON-RPC connections on <port> (default: 8332, testnet:
18332, signet: 38332, regtest: 18443)
2. test_gossip: Default port for regtest
hex: 2607 is now .... (could be 4d86 but Elements uses another port)
dec: 9735 is now any port (could be 19846 ^^ but now is for any port)
The lines which were binding to default port were removed as the
default port is different on each network.
NOTE: Remember not to modify gossip_store tests which loads everything raw
including the checksums.
Changelog-Changed: If the port is unspecified, the default port is chosen according to used network similarly to Bitcoin Core.
We make sure the gossip msg was sent, but the other node might not
have digested it yet:
```
# Check other node can parse these
> addresses = l2.rpc.listnodes(l1.info['id'])['nodes'][0]['addresses']
E KeyError: 'addresses'
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we forget a channel, we can get upset when we get an update about it:
```
2021-11-04T00:35:43.8242370Z lightningd-3: 2021-11-04T00:29:22.073Z DEBUG gossipd: Pruning channel 103x1x1 from network view (ages 61 and 22s)
...
2021-11-04T00:35:43.8263502Z lightningd-3: 2021-11-04T00:29:22.509Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-gossipd: Bad gossip order: WIRE_CHANNEL_UPDATE before announcement 103x1x1/0
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This surprised me, since the CHANGELOG for [0.8.2] said:
We now announce multiple addresses of the same type, if given. ([3609](https://github.com/ElementsProject/lightning/pull/3609))
But it lied!
Changelog-Fixed: We really do allow providing multiple addresses of the same type.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
October was the date Torv2 is no longer supported by the Tor Project;
it will probably not work at all by next release, so we should remove
it now even though it's not quite the 6 months we prefer for
deprecation cycles.
I still see 110 nodes advertizing Torv2 (vs 10,292 Torv3); we still
parse and display it, we just don't advertize or connect to it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It was incredibly flaky due to the potential for l2 announcing the
channel before l1 could get to it, thus suppressing the outgoing
announcement which we were looking for. This now checks either
direction.
Before this fix the failure rate was 24% (out of 100 runs), afterwards
it's 0%.
Changelog-None
We can miss it in both logs, so wait for it instead:
```
2021-09-22T07:25:59.1582950Z > l3.rpc.addgossip(ann.split()[3])
2021-09-22T07:25:59.1583911Z E AttributeError: 'NoneType' object has no attribute 'split'
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Change order parameters in the listforwards command
Changelog-Deprecated: Change order of the status parameter in the listforwards rpc command.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Tor v2 hidden services have been deprecated for a while:
https://blog.torproject.org/v2-deprecation-timeline .
This prevents user from being able to set them in the configuration
and to connect to them while still letting us be able to parse them
for gossip.
Changelog-Deprecated: lightningd: v2 Tor addresses. Use v3. See https://blog.torproject.org/v2-deprecation-timeline.
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
Otherwise, we might find an address other than the one given and
the user might think that address worked.
Fixes: #4185
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `connect` returns `address` it actually connected to
We were getting bad gossip because some nodes discarded the channel
announcement for being in the future. This is because the node was, at
that time, below the confirmation height. It'd then discard the
followup messages because not preceded by an announcement, and getting
upset about that.
We used to create the entire reply, the if it was too big, split in
half and retry.
Now that the main network is larger, this always happens with a full
request, which is inefficient.
Instead, produce a reply assuming no compression, then compress as a
bonus. This is simpler and more efficient, at cost of sending more
packets.
I also renamed an internal dev var to make it clearer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Instead of a boutique message, use a "real" channel_announcement for
private channels (with fake sigs and pubkeys). This makes it far
easier for gossmap to handle local channels.
Backwards compatible update, since we update old stores.
We also fix devtools/dump-gossipstore to know about the tombstone markers.
Since we increment our channel_announce count for local channels now,
the stats in the tests changed too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We really are just interested in their on-chain footprint, so actually
starting the nodes is pointless overhead, and caused a lot of flakyness due to
the output ordering sometimes not matching up. We now just use the `bitcoind`
API to fund, sign and send a raw transaction that matches the stashed gossip
messages.
With a feerate of 7500perkw and subtracting 660 sats for anchors, a
20,000 sat channel has capacity about 9800 sat, below our default:
You gave bad parameters: channel capacity with funding 20000sat, reserves 546sat/546sat, max_htlc_value_in_flight_msat is 18446744073709551615msat, channel capacity is 9818sat, which is below 10000000msat
So bump channel amounts.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I started replacing all get_node() calls, but got bored, so then just did the
tests which call get_node() 3 times or more.
Ends up not making a measurable speed difference, but it does make some
things neater and more standard.
Times with SLOW_MACHINE=1 (given that's how Travis tests):
Time before (non-valgrind):
393 sec (had 3 failures?)
Time after (non-valgrind):
410 sec
Time before (valgrind):
890 seconds (had 2 failures)
Time after (valgrind):
892 sec
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The previous patch changed the gossip_store, but in a trivial way.
The next patch will implement upgrading, so this is the test.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Michael Schmoock
Jan Sarenik
Christian Decker
Vincenzo Palazzo
niftynei
Nalin Bhardwaj
Antoine Poinsot