Since we now have a couple of long-lived dependents it is time we stop
removing channels from the table once they are fully closed, and instead just
mark them as closed. This allows us to keep forwards and transactions foreign
keys intact, and it may help us debug things after the fact.
Fixes#2028
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Instead of deleting the channels we will simple mark them as `CLOSED` from now
on. This is needed for some of the other tables not to end up with dangling
references that would otherwise survive the channel lifetime, e.g., forwards
and transactions.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
These are generalized from our internal implementations.
The main difference is that 'struct json_escaped' is now 'struct
json_escape', so we replace that immediately.
The difference between lightningd's json-writing ringbuffer and the
more generic ccan/json_out is that the latter has a better API and
handles escaping transparently if something slips through (though
it does offer direct accessors so you can mess things up yourself!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This new parameter takes a list of outpoints (as txid:vout) and fund a channel from the corresponding utxos.
Example : fundchannel <id> 10000 normal 1 [10767f0db0e568127fffd7f70a154d4599f42d62babf63230a7c3378bfce3cb0:0, c9e040e0b5fc8c59d5e7834108fbc5583001f414dd83faf0a05cff9d1a92d32c:0]
Since we add the transactions while processing the blockchain, and before we
have enough context to annotate them correctly, i.e., in the txwatches, we add
them first and then annotate them aposteriori.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Mainly used to differentiate channel-related transactions from on-chain wallet
transactions. Will be used to filter `listtransaction` results and bundle
transactions that belong to the same channel.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We reserve inputs when we're going to send a transaction, but we don't
unreserve them if we crash. This is most graphically demonstrated by
the txprepare case, which makes it easier to trigger.
Instead, we should query bitcoind to see whether the tx made it out or
not, as we would do manually with dev-rescan-outputs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The original idea is to "tal" channel on the "ctx"(In fact, we'd like to set ctx as "ld").
But we already tal channel on "ld" in new_channel(), so "ctx" is unused.
68fe5eacde introduced a skip in the iteration
of the available funds, which means utxos[i] may be off the end of utxos.
Reported-and-debugged-by: @nitramiz
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We'd like to display the receive and resolution times in the forwardings
table. In order to remember the receive time we need to store it in the DB
along with the other information.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
I tried to just do gossipd, but it was uncontainable, so this ended up being
a complete sweep.
We didn't get much space saving in gossipd, even though we should save
24 bytes per node.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I was tempted to create a new db_select_stmt wrapper type, but that means
a lot of boilerplate around binding, which expects to work with db_prepare
*and* db_select_prepare.
This lets us clearly differentiate between db queries (which don't need to
go to a plugin) and db changes (which do).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
- Intrduce DB update `channel` values: `feerate_base` and `feerate_ppm`
- Make fist use of now context realted DB migration
- Add `struct channel` members of the same name
- Use struct values instead of config when commiting new channels
Allow a function as well as (or instead of!) an sql statement. That
will let us do things like set per-channel values to the global
defaults, for example.
Since we remove the NULL termination, the final entry is ARRAY_SIZE()-1
not ARRAY_SIZE()-2.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This field was used by `pay` to hold the bolt11 description if the bolt11
string used `h` to hash the description (which nobody ever did). If the
`h` field wasn't present, it could contain anything, as it wasn't checked.
It's really useful to have a label for payments (eg. '1 Cuban'), but adding
yet-another option would be painful, so we simply rename 'description'
to 'label' except inside the db.
This means we need to do some tricky parameter parsing to handle array
and keyword JSON arguments, but only until we remove the old name.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Without this, there's no proof of payment, since it is the signed invoice
that make the receipt valid.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In order to avoid having to ask the HSM for public keys to
their_unilateral/to_us outputs we just store the `scriptPubkey` with the UTXO,
which can then be converted to the P2WPKH address.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This allows us to specify that an output must have been confirmed before the
given maximum height. This allows us to specify a minimum number of
confirmations for an output to be selected.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We need to do it in various places, but we shouldn't do it lightly:
the primitives are there to help us get overflow handling correct.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As a side-effect of using amount_msat in gossipd/routing.c, we explicitly
handle overflows and don't need to pre-prune ridiculous-fee channels.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Add the change output to owned_txfilter so its entry in db will
get a confirmation_height when detected in a block by filter_block_txs
before this commit, after a 'withdraw' command, 'listfunds' would
not show our change outputs as confirmed
Modified the log message in wallet_extract_owned_outputs to
append 'CONFIRMED' when it is called with a blockheight arg.
To make distinction between (1st call) when adding owned output to the
db and (2th call) when confirmed in block.
We had a bug 0ba547ee10 caused by
short_channel_id overflow. If we'd caught this, we'd have terminated
the peer instead of crashing, so add appropriate checks.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I upgraded my node with --disable-compat, and a heap of channels closed like:
CHANNELD_NORMAL:We disagree on short_channel_ids: I have 557653x0x1351, you say 557653x2373x1",
This is because the scids are strings in the databases, and it failed to parse
them properly.
Now we'll not start if that happens.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Christian and I both unwittingly used it in form:
*tal_arr_expand(&x) = tal(x, ...)
Since '=' isn't a sequence point, the compiler can (and does!) cache
the value of x, handing it to tal *after* tal_arr_expand() moves it
due to tal_resize().
The new version is somewhat less convenient to use, but doesn't have
this problem, since the assignment is always evaluated after the
resize.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We currently use 'all-zeroes' as 'unknown', but NULL is more natural
even if we have to send it as all-zeroes over the wire due to
expressiveness limitations in our generation code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is prep work for when we sign htlc txs with
SIGHASH_SINGLE|SIGHASH_ANYONECANPAY.
We still deal with raw signatures for the htlc txs at the moment, since
we send them like that across the wire, and changing that was simply too
painful (for the moment?).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We always have an addr entry in the db (though it may be an ephemeral socket
the peer connected in from). We don't have to handle a NULL address.
While we're there, simplify new_peer not to take the features args;
the caller who cares immediately updates the features anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If there are two HTLCs with the same preimage, lightningd would always
find the first one. By including the id in the `struct htlc_stub`
it's both faster (normal HTLC lookup) and allows lightningd to detect
that onchaind wants to fail both of them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And use wallet_forward_status_in_db() everywhere in db code.
And clean up extra CHANGELOG.md entry (looks like rebase error?)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The left join should make sure we still get the results but
referencing the fields and/or attempting to write them to the JSON-RPC
result will cause unforeseen problems. So just omit if we forgot
something.
Noted by @cdecker, the term 'local' is grossly overused, and the hout
preimage is basically only used as a sanity check (though I've just put
a FIXME there for now).
Also eliminated spurious blank line which crept into wallet.c.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
failoutchannel tells us which channel to send an update for (specifically
for temporary_channel_failure); but we don't save it into the db. It's
not even clear we should, since it's a corner case and the channel might
not even exist when we come back.
So on db restore, change such errors to WIRE_TEMPORARY_NODE_FAILURE
which doesn't need an update.
We also don't memset it to 0 in the normal case (we only access if it
failcode has the UPDATE bit set) so valgrind will trigger if we're
wrong.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't save them to the database, so fix things up as we load them.
Next patch will actually save them into the db, and this will become
COMPAT code.
Also: call htlc_in_check() with NULL on db load, as otherwise it aborts
internally.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We do this a lot, and had boutique helpers in various places. So add
a more generic one; for convenience it returns a pointer to the new
end element.
I prefer the name tal_arr_expand to tal_arr_append, since it's up to
the caller to populate the new array entry.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's no reason for the db to ever return non-NULL if it's spent. And there's
only one caller, for which that is definitely true.
Suggested-by: @cdecker
Fixes: #1934
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's an array: we were only saving the single element; if there was more than
one changed HTLC we'd get a bad signature!
The report in #1907 is probably caused by the other side re-requesting
something we considered already finalized; to avoid this particular error,
we should set the field to NULL if there's no last_sent_commit.
I'm increasingly of the opinion we want to just save all the update
packets to the db and blast them out, instead of doing this
second-guessing dance.
Fixes: #1907
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means we don't try to unilaterally close after a restart, *and*
we can tell onchaind to try to use the point to recover funds when the
peer unilaterally closes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note that we don't actually need the output number: it's the tx itself
which is confirmed. And the next caller doesn't have it convenient, so
eliminate it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These are not confirmed by the normal methods (wallet_can_spend is false!),
so we'll deal with them manually.
We use UTXO_FIELDS in wallet_add_utxo, too, for consistency.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
tal_count() is used where there's a type, even if it's char or u8, and
tal_bytelen() is going to replace tal_len() for clarity: it's only needed
where a pointer is void.
We shim tal_bytelen() for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This seems like a premature optimization: it tried to cut down the number of
allocations by reusing the same `struct invoice_details` while iterating through
a number of results. But this sidesteps the checks by `valgrind` and we'd miss a
missing field that was set by the previous iteration.
Reported-by: @rustyrussell
Signed-off-by: Christian Decker <@cdecker>
`wallet_stmt2payment` always expects the same fields in the same order, so we
should make sure that we always fetch them in that order and all of them.
Well, it's generated by shachain, so technically it is a sha256, but
that's an internal detail. It's a secret.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
structeq() is too dangerous: if a structure has padding, it can fail
silently.
The new ccan/structeq instead provides a macro to define foo_eq(),
which does the right thing in case of padding (which none of our
structures currently have anyway).
Upgrade ccan, and use it everywhere. Except run-peer-wire.c, which
is only testing code and can use raw memcmp(): valgrind will tell us
if padding exists.
Interestingly, we still declared short_channel_id_eq, even though
we didn't define it any more!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tor wasn't actually working for me to connect to anything, but it worked
for 'ssh -D' testing.
Note that the resulting 'netaddr' is a bit weird, but I guess it's honest.
$ ./cli/lightning-cli connect 021f2cbffc4045ca2d70678ecf8ed75e488290874c9da38074f6d378248337062b
{
"id": "021f2cbffc4045ca2d70678ecf8ed75e488290874c9da38074f6d378248337062b"
}
$ ./cli/lightning-cli listpeers
{
"peers": [
{
"state": "GOSSIPING",
"id": "021f2cbffc4045ca2d70678ecf8ed75e488290874c9da38074f6d378248337062b",
"netaddr": [
"ln1qg0je0lugpzu5ttsv78vlrkhteyg9yy8fjw68qr57mfhsfyrxurzkq522ah.lseed.bitcoinstats.com:9735"
],
"connected": true,
"owner": "lightning_gossipd"
}
]
}
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Risks leakage. We could do lookup via the proxy, but that's a TODO.
There's only one occurance of getaddrinfo (and no gethostbyname), so
we add a flag to the callers.
Note: the use of --always-use-proxy suppresses *all* DNS lookups, even
those from connect commands and the command line.
FIXME: An implicit setting of use_proxy_always is done in gossipd if it
determines that we are announcing nothing but Tor addresses, but that
does *not* suppress 'connect'.
This is fixed in a later patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Add special option where an empty host means 'wildcard for IPv4 and/or IPv6'
which means ':1234' can be used to set only the portnum.
2. Only add this protocol wildcard if --autolisten=1 (default)
and no other addresses specified.
3. Pass it down to gossipd, so it can handle errors correctly: in most cases,
it's fatal not to be able to bind to a port, but for this case, it's OK
if we can only bind to one of IPv4/v6 (fatal iff neither).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This replacement is a little menial, but it explicitly catches all
the places where we allow a local socket. The actual implementation of
opening a AF_UNIX socket is almost hidden in the patch.
The detection of "valid address" is now more complex:
p->addr.itype != ADDR_INTERNAL_WIREADDR || p->addr.u.wireaddr.type != ADDR_TYPE_PADDING
But most places we do this, we should audit: I'm pretty sure we can't
get an invalid address any more from gossipd (they may be in db, but
we should fix that too).
Closes: #1323
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I would have liked to make it a tal object, then we'd catch most
things with our memleak detection. However, sqlite3 doesn't seem to
allow allocator overrides.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the cause of 'sqlite3_close: unable to close due to unfinalized statements or unfinished backups' with the --daemon option.
Fixes: #1420
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently we intuit it from the fd being closed, but that may happen out
of order with when the master thinks it's dead.
So now if the gossip fd closes we just ignore it, and we'll get a
notification from the master when the peer is disconnected.
The notification is slightly ugly in that we have to disable it for
a channel when we manually hand the channel back to gossipd.
Note: as stands, this is racy with reconnects. See the next patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
trueptolemy
Karl-Johan Alm
Christian Decker
Rusty Russell
darosior
Michael Schmoock
Simon Vrouwe
arowser
practicalswift
William Casarin
Jan Sarenik