We have them split over common/param.c, common/json.c,
common/json_helpers.c, common/json_tok.c and common/json_stream.c.
Change that to:
* common/json_parse (all the json_to_xxx routines)
* common/json_parse_simple (simplest the json parsing routines, for cli too)
* common/json_stream (all the json_add_xxx routines)
* common/json_param (all the param and param_xxx routines)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We had this assertion fail, and I can't see a clear reason why. Remove it
(i.e. don't crash because we're having trouble with creating invoice routehints)
and add logging.
```
Assertion failed: a->c->rr_number < b->c->rr_number (lightningd/invoice.c: cmp_rr_number: 623)
lightningd: FATAL SIGNAL 6 (version v0.10.2-modded)
0x5654f1c40061 send_backtrace
common/daemon.c:33
0x5654f1c400e9 crashdump
common/daemon.c:46
0x7efd87da6c8a ???
???:0
```
There are several possible causes for this:
1. We have two channels with the same rr_number. A quick audit shows we always set that rr_number to a unique value (and 64 bits, so wrap is not possible between the release and now!).
2. It's theoretically possible that sort() could compare a value with itself, but that would be really dumb: it doesn't that I've ever seen, but then, we've never seen this assert() hit, either.
3. listincoming has given us the same channel twice. I don't see how that is possible: we had a race where channels could momentarily vanish, but never be duplicated (emailed crash.log shows no duplicates!).
4. General corruption/freed memory access. If a channel we've just looked up is gone but still in the hash table, this is possible but would cause lots of random behavior and crashes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is consistent with our output changes, and increases consistency.
It also keeps future sanity checks happy, that we only use JSON msat
helpers with '_msat' fields.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `invoice`, `sendonion`, `sendpay`, `pay`, `keysend`, `fetchinvoice`, `sendinvoice`: `msatoshi` argument is now called `amount_msat` to match other fields.
Changelog-Deprecated: JSON-RPC: `invoice`, `sendonion`, `sendpay`, `pay`, `keysend`, `fetchinvoice`, `sendinvoice` `msatoshi` (use `amount_msat`)
Makes types harder, and I've never personally used them.
Changelog-Deprecated: JSON-RPC: `invoice` `expiry` no longer allowed to be a string with suffix, use an integer number of seconds.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Means that field is now optional in JSON output.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `delinvoice` has a new parameter `desconly` to remove description.
LNURL wants this so they can include images etc in descriptions.
Replaces: #4892
Changelog-Added: JSON-RPC: `invoice` has a new parameter `deschashonly` to put hash of description in bolt11.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to add some, since our internal representations of
htlc_maximum_msat round up, and we need to disable mpp which succeeds
in getting a payment through by splitting.
We also allow dev_routes to suppress invoice routehints altogether.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As per proposal in https://github.com/lightning/bolts/pull/962
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: protocol: support for legacy onion format removed, since everyone supports the new one.
If this field is missing for whatever reason (weird db state?)
clightning will crash when listing invoices.
Signed-off-by: William Casarin <jb55@jb55.com>
And turn "" includes into full-path (which makes it easier to put
config.h first, and finds some cases check-includes.sh missed
previously).
config.h sets _GNU_SOURCE which really needs to be done before any
'#includes': we mainly got away with it with glibc, but other platforms
like Alpine may have stricter requirements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before:
Ten builds, laptop -j5, no ccache:
```
real 0m36.686000-38.956000(38.608+/-0.65)s
user 2m32.864000-42.253000(40.7545+/-2.7)s
sys 0m16.618000-18.316000(17.8531+/-0.48)s
```
Ten builds, laptop -j5, ccache (warm):
```
real 0m8.212000-8.577000(8.39989+/-0.13)s
user 0m12.731000-13.212000(12.9751+/-0.17)s
sys 0m3.697000-3.902000(3.83722+/-0.064)s
```
After:
Ten builds, laptop -j5, no ccache: 8% faster
```
real 0m33.802000-35.773000(35.468+/-0.54)s
user 2m19.073000-27.754000(26.2542+/-2.3)s
sys 0m15.784000-17.173000(16.7165+/-0.37)s
```
Ten builds, laptop -j5, ccache (warm): 1% faster
```
real 0m8.200000-8.485000(8.30138+/-0.097)s
user 0m12.485000-13.100000(12.7344+/-0.19)s
sys 0m3.702000-3.889000(3.78787+/-0.056)s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This includes the new bolt11 test vectors, and also removes the
requirement that HTLCs be less than 2^32 msat. We keep that for now
because Electrum enforced it on receive: in two releases we will stop
that too.
So no longer warn about needing mpp in that case either.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Protocol: No longer restrict HTLCs to
This makes it easier to access (rather than decoding bolt11).
Changelog-Added: JSON-RPC: `invoice` now outputs explicit `payment_secret` it its own field.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't do it for sendinvoice (yet?).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: `fetchinvoice` can take a payer note, and `listinvoice` will show the payer_notes received.
Discovered by the next test, oops.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: JSONRPC: `listinvoice` no longer crashes if given an invalid (or bolt12) `invstring` argument.
Show amount they were trying to pay with, not invoice amount.
Also, show min fee in closing, not fee they offered.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
https://github.com/lightningnetwork/lightning-rfc/pull/877 talks about
removing this restriction (only Electrum actually enforced it on
receive), so start by allowing creation of giant invoices, though
we mark them as requiring mpp.
Changelog-Changed: JSON-RPC: `invoice` now allows creation of giant invoices (>= 2^32 msat)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This turned into a more extensive cleanup than intended. The previous
warnings were overlapping and confusing, especially now MPP is the norm.
*warning_capacity* is now the "even under best circumstances, we don't
have enough incoming capacity", which is really what
warning_mpp_capacity was trying to say (no longer printed).
*warning_offline* and *warning_deadends* are only given if adding such
peers would have helped give capacity (i.e. not if *warning_capacity*
is set). The new *warning_private_unused* tells you that we would
have sufficient capacity, but we refused to expose private channels.
The test cases have been enhanced to cover the new warnings.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `invoice` now gives `warning_private_unused` if unused unannounced channels could have provided sufficient capacity.
Changelog-Changed: JSON-RPC: `invoice` warnings are now better defined, and `warning_mpp_capacity` is no longer included (since `warning_capacity` covers that).
As @fiatjaf points out we were notifying before we were actually set
on accepting, since the hook could also still reject. Switched them
around does and calling the notification only once it's been decided
is the correct thing to do.
Changelog-Fixed: plugin: The `invoice_payment` notification was being sent before the hook was called, which could still abort it.
Suggested-by: Fiatjaf <@fiatjaf>
Signed-off-by: Christian Decker <@cdecker>
The fetchinvoice and offers plugins disable themselves if the option
isn't enabled (it's enabled by default on EXPERIMENTAL_FEATURES).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: `experimental-offers` enables fetch, payment and creation of (early draft) offers.
Our new "decode" command will also handle bolt11. We make a few cleanups:
1. Avoid type_to_string() in JSON, instead use format functions directly.
2. Don't need to escape description now that JSON core does that for us.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is required if we want to create a "bouncer" plugin (in my copious free time!)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `invoice` now takes an optional `cltv` parameter.
A user reported that it is sometimes cumbersome to search an invoice
based on the payment hash or the bolt11 string in the full list, which
may be required when we don't have the label available.
This adds support for querying / filtering based on the `payment_hash`
or `bolt11` string.
Changelog-Added: JSON-RPC: `listinvoices` can now query for an invoice matching a `payment_hash` or a `bolt11` string, in addition to `label`
Invoices are signed with our own key, but we use a transient payer_key with a
tweak for invoice_requests (and refunds).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Hoist 7200 constant into the bolt12 heade2.
2. Make preimage the last createinvoice arg, so we could make it optional.
3. Check the validity of the preimage in createinvoice.
4. Always output used flag in listoffers.
5. Rename wallet offer iterators to offer_id iterators.
6. Fix paramter typos.
7. Rename `local_offer_id` parameter to `localofferid`.
8. Add reference constraints on local_offer_id db fields.
9. Remove cut/paste comment.
10. Clarify source of fatal() messages in wallet.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This takes an unsigned bolt11 (or bolt12 if EXPERIMENTAL_FEATURES) string
and signs it and puts it in the database.
The invoice command could now be moved out to a plugin, in fact.
Changelog-Added: JSON-RPC: `createinvoice` new low-level invoice creation API.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This allows us to mark an offer used when an invoice derived from it
is paid, and importantly, avoid any other invoices for the offer being
paid.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's actually a (very unlikely) race here: we would previously have
crashed with an assertion in invoices_resolve.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We register on it for offers, and without this nobody else can.
Changelog-Changed: plugins: more than one plugin can now register invoice_payment hook.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're going to want this for bolt13 formation as well.
As a result of reworking the logic into "candidate selection" then
"route hint selection", we need to change the way round-robin works.
We use a simple incrementing index now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note that other directories were explicitly depending on the generated
file, instead of relying on their (already existing) dependency on
$(LIGHTNINGD_HSM_CLIENT_OBJS), so we remove that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
You can't pay them anyway, and at least one person used 0 instead of "any".
Closes: #3808
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `invoice` no longer accepts zero amounts (did you mean "any"?)
It's not all that rare to do these operations, and requiring annotations
for it is a little painful.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `delinvoice` will now report specific error codes: 905 for failing to find the invoice, 906 for the invoice status not matching the parameter.
Rusty Russell
niftynei
William Casarin
Christian Decker
ZmnSCPxj jxPCSnmZ