It's both complex and flawed, as ZmnSCPxj points out. Make a generic
fd ordering routine, and use it.
Plus, test it!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we're over the dust limit, we fail it immediatey *after* commiting
it, but we need a way to signal this throughout the lifecycle, so we add
it to htlc_in struct and persist it through to the database.
If it's supposed to be failed, we fail after the commit cycle is
completed.
To reduce the surface area of amount of a channel balance that can be
eaten up as htlc dust, we introduce a new config
'--max-dust-htlc-exposure-msat', which sets the max amount that any
channel's balance can be added as dust
Changelog-Added: config: new option --max-dust-htlc-exposure-msat, which limits the total amount of sats to be allowed as dust on a channel
Fixes: #4868
ChangeLog-Fixed: We now no longer self-limit the number of file descriptors (which limits the number of channels) in sufficiently modern systems, or where we can access `/proc` or `/dev/fd`. We still self-limit on old systems where we cannot find the list of open files on `/proc` or `/dev/fd`, so if you need > ~4000 channels, upgrade or mount `/proc`.
This also inadvertently fixes a latent bug: before this patch, in the
`subd` function in `lightningd/subd.c`, we would close `execfail[1]`
*before* doing an `exec`.
We use an EOF on `execfail[1]` as a signal that `exec` succeeded (the
fd is marked CLOEXEC), and otherwise use it to pump `errno` to the
parent.
The intent is that this fd should be kept open until `exec`, at which
point CLOEXEC triggers and close that fd and sends the EOF, *or* if
`exec` fails we can send the `errno` to the parent process vua that
pipe-end.
However, in the previous version, we end up closing that fd *before*
reaching `exec`, either in the loop which `dup2`s passed-in fds (by
overwriting `execfail[1]` with a `dup2`) or in the "close everything"
loop, which does not guard against `execfail[1]`, only
`dev_disconnect_fd`.
If the port is set, we spawn it (lightning_websocketd) on any
connection to that port. That means websocketd is a per-peer daemon,
but it means every other daemon uses the connection normally (it's
just actually talking to websocketd instead of the client directly).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This makes init a two-stage, and causes some code hoisting.
And we can now send all the HTLCs in a single message, since we have
an 128MB limit and each HTLC is 37 bytes.
This breaks the onchaind stresstest, which uses canned internal messages.
It's time to finally delete that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This re-establishes the prior behavior where a `sendpay` or
`sendonion` that'd match a prior payment would cause the prior payment
to be deleted. While we no longer delete prior attempts we now avoid a
primary key collision by incrementing once. This helps us not having
to touch all existing tests, and likely avoids breaking other users
too.
One of the fundamental constraints of the payment groups idea is that
there may only ever be one group in flight at any point in time, so if
we find a group that is in flight, any new `sendpay` or `sendonion`
must match its `groupid`.
This was the main cause of the pay states flip-flopping, since we
reset the status on each attempt any final status is not really
final. Let's keep them around, and provide a stable history.
It's probably not worth fixing for the other daemons.
Changelog-Changed: JSON-RPC: `ping` now only works if we have a channel with the peer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
To minimize the diffs, we #if 0 the code. We'll reenable it once
channeld is ready.
We also temporarily disable the ping tests.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This adds a new hook: onion_message_ourpath for when we know a message
came in via a blinded path we created. The onion_message_blinded hook
is now called for all other messages, since all messages are now
blinded.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When we are calling hooks, we track them via a linked list. As they
execute, we pop them off the list in plugin_hook_killed().
When we kill a plugin, we have a destructor which remove its entry from the linked list: plugin_hook_killed.
If it's at the head of the list, that means the plugin died while
processing the hook, so instead of just deleting it, we call
plugin_hook_killed() which behaves as if it said "result: continue".
But plugin_hook_killed() just returns if we're shutting down; this
leaves the link (then freed) on the list, and the *next* plugin tries
to unlink from the list, accessing the previous free entry.
The fix is simple: unlink from the list in plugin_hook_killed() even
if we're shutting down.
```
Valgrind error file: valgrind-errors.78570
==78570== Invalid write of size 8
==78570== at 0x174B55: list_del_ (list.h:328)
==78570== by 0x174FCC: plugin_hook_killed (plugin_hook.c:135)
==78570== by 0x21DC3F: notify (tal.c:240)
==78570== by 0x21E156: del_tree (tal.c:402)
==78570== by 0x21E1A8: del_tree (tal.c:412)
==78570== by 0x21E4F2: tal_free (tal.c:486)
==78570== by 0x16EBD1: plugin_kill (plugin.c:345)
==78570== by 0x16F9C4: plugin_conn_finish (plugin.c:724)
==78570== by 0x20F1A5: destroy_conn (poll.c:244)
==78570== by 0x20F1C9: destroy_conn_close_fd (poll.c:250)
==78570== by 0x21DC3F: notify (tal.c:240)
==78570== by 0x21E156: del_tree (tal.c:402)
==78570== Address 0x6aee688 is 40 bytes inside a block of size 72 free'd
==78570== at 0x483CA3F: free (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==78570== by 0x21E224: del_tree (tal.c:421)
==78570== by 0x21E1A8: del_tree (tal.c:412)
==78570== by 0x21E4F2: tal_free (tal.c:486)
==78570== by 0x16EBD1: plugin_kill (plugin.c:345)
==78570== by 0x16F9C4: plugin_conn_finish (plugin.c:724)
==78570== by 0x20F1A5: destroy_conn (poll.c:244)
==78570== by 0x20F1C9: destroy_conn_close_fd (poll.c:250)
==78570== by 0x21DC3F: notify (tal.c:240)
==78570== by 0x21E156: del_tree (tal.c:402)
==78570== by 0x21E4F2: tal_free (tal.c:486)
==78570== by 0x20D7B6: io_close (io.c:450)
==78570== Block was alloc'd at
==78570== at 0x483B7F3: malloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==78570== by 0x21DCAD: allocate (tal.c:250)
==78570== by 0x21E26E: tal_alloc_ (tal.c:428)
==78570== by 0x175599: plugin_hook_call_ (plugin_hook.c:259)
==78570== by 0x13616F: plugin_hook_call_onion_message_blinded (onion_message.c:126)
==78570== by 0x13643B: handle_obs_onionmsg_to_us (onion_message.c:187)
==78570== by 0x138BBD: gossip_msg (gossip_control.c:140)
==78570== by 0x178AEC: sd_msg_read (subd.c:495)
==78570== by 0x20CA00: next_plan (io.c:59)
==78570== by 0x20D608: do_plan (io.c:407)
==78570== by 0x20D64A: io_ready (io.c:417)
==78570== by 0x20F8F1: io_loop (poll.c:445)
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was measured as a 95th percentile in our rough testing, thanks to
all the volunteers who monitored my channels.
Fixes: #4761
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `setchannelfee` gives a grace period (`enforcedelay`) before rejecting old-fee payments: default 10 minutes.
Currently it will be used for onion replies, but we can use it for offers
and invoices in future, if we want to avoid revealing our node_id.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This expects the caller to create the TLVs to put in each hop; it
simply creates the onion and sends it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We put this in reply paths, so we can tell if they are used. This lets us
avoid responding unless the correct reply path is used.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
One change from the obsolete version handling, gossipd will no longer send
forwarding onion msgs to lightningd, but will forward it directly.
That was the effect before, anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
sendonionmessage is going to be the new one, and do much *less*.
As this is an internal experimental-only API, no deprecation cycle
required.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
offers contain an x-only pubkey: to route to them to need to know the
02 vs 03 prefix. If they're in the gossmap it's easy, but if they're
a directly-connected peer it's harder. We used to have
sendonionmessage tweak the key if it found a peer with the matching
key, but this was always a hack.
It turns out that we try to connect to the node anyway, which is
a noop if it's already connected. So try connecting to the other
parity if the first one fails.
Also, this registers when we fail to connect, and returns an error
rather than waiting for timeout.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
```
E - Node /tmp/ltests-uf2g_5gd/test_sendinvoice_obsolete_1/lightning-1/ has memory leaks: [
E {
E "backtrace": [
E "ccan/ccan/tal/tal.c:442 (tal_alloc_)",
E "ccan/ccan/tal/tal.c:471 (tal_alloc_arr_)",
E "ccan/ccan/tal/str/str.c:91 (tal_vfmt_)",
E "ccan/ccan/tal/str/str.c:44 (tal_fmt_)",
E "common/wireaddr.c:232 (fmt_wireaddr_without_port)",
E "common/wireaddr.c:251 (fmt_wireaddr)",
E "common/wireaddr.c:208 (fmt_wireaddr_internal)",
E "common/wireaddr.c:221 (fmt_wireaddr_internal_)",
E "common/type_to_string.c:32 (type_to_string_)",
E "lightningd/peer_control.c:1433 (json_add_peer)",
E "lightningd/peer_control.c:1481 (json_listpeers)",
E "lightningd/jsonrpc.c:627 (command_exec)",
E "lightningd/jsonrpc.c:762 (rpc_command_hook_final)",
E "lightningd/plugin_hook.c:274 (plugin_hook_call_)",
E "lightningd/jsonrpc.c:850 (plugin_hook_call_rpc_command)",
E "lightningd/jsonrpc.c:949 (parse_request)",
E "lightningd/jsonrpc.c:1040 (read_json)",
E "ccan/ccan/io/io.c:59 (next_plan)",
E "ccan/ccan/io/io.c:435 (io_do_always)",
E "ccan/ccan/io/poll.c:300 (handle_always)",
E "ccan/ccan/io/poll.c:377 (io_loop)",
E "lightningd/io_loop_with_timers.c:21 (io_loop_with_timers)",
E "lightningd/lightningd.c:1112 (main)"
E ],
E "label": "common/wireaddr.c:232:char[]",
E "parents": [
E "common/json_stream.c:22:struct json_stream",
E "ccan/ccan/io/io.c:91:struct io_conn",
E "lightningd/lightningd.c:103:struct lightningd"
E ],
E "value": "0x56041b322a48"
E }
E ]
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
After recent header files clean-up it was not possible to
build c-lightning 7401b2682. This patch fixes it both for
Alpine Linux and OpenBSD.
Proposed-by: nathanael <nathanael@dalliard.ch>
Changelog-None
Before:
Ten builds, laptop -j5, no ccache:
```
real 0m36.686000-38.956000(38.608+/-0.65)s
user 2m32.864000-42.253000(40.7545+/-2.7)s
sys 0m16.618000-18.316000(17.8531+/-0.48)s
```
Ten builds, laptop -j5, ccache (warm):
```
real 0m8.212000-8.577000(8.39989+/-0.13)s
user 0m12.731000-13.212000(12.9751+/-0.17)s
sys 0m3.697000-3.902000(3.83722+/-0.064)s
```
After:
Ten builds, laptop -j5, no ccache: 8% faster
```
real 0m33.802000-35.773000(35.468+/-0.54)s
user 2m19.073000-27.754000(26.2542+/-2.3)s
sys 0m15.784000-17.173000(16.7165+/-0.37)s
```
Ten builds, laptop -j5, ccache (warm): 1% faster
```
real 0m8.200000-8.485000(8.30138+/-0.097)s
user 0m12.485000-13.100000(12.7344+/-0.19)s
sys 0m3.702000-3.889000(3.78787+/-0.056)s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is best-practice (to ensure prototypes match up), but there were a
few places we didn't (at least, directly). Make it a requirement,
either of form "foo.h" or <dir/foo.h>.
The noise is the change to our print templates.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This allows cmdline users to have more idea what's going on.
Inspired-by: https://github.com/ElementsProject/lightning/issues/4777
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: `close` now notifies about the feeranges each side uses.
Currently we actually insist it's the default, but in future it could be
different.
We also need to tell openingd what the channel_type was, if we resume
via openingd_funder_complete().
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Openingd can query them itself (as dualopend already does). And move
the two feature args next to each other on the wire.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
That was quick!
We remove the 50% test, since the default is now to use quickclose.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: We now perform quick-close if the peer supports it.
This affects the range we offer even without quick-close, but it's
more critical for quick-close.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSONRPC: `close` now takes a `feerange` parameter to set min/max fee rates for mutual close.
This follows https://github.com/lightningnetwork/lightning-rfc/pull/847.
For anchor_outputs, we pass down a max_feerate to closingd, and set the
fee ceiling to MAX. It uses that to estimate the desired closing fee.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: Anchor output mutual close allow a fee higher than the final commitment transaction (as per lightning-rfc #847)
Based on a commit by @niftynei, but:
- Separated quickclose logic from main loop.
- I made it indep of anchor_outputs, use and option instead.
- Disable if they've specified how to negotiate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It also gets rid of the requirement that close negotiation fee maximum
is the old commitment transaction. We still do that, however, to
avoid surprising old peers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This touches a lot of text, mainly to change "if `option_anchor_outputs`"
to "if `option_anchors`"
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This includes the new bolt11 test vectors, and also removes the
requirement that HTLCs be less than 2^32 msat. We keep that for now
because Electrum enforced it on receive: in two releases we will stop
that too.
So no longer warn about needing mpp in that case either.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Protocol: No longer restrict HTLCs to
Not necessary yet, but it will be once shutdown starts waiting for
plugins to respond: we don't want these to try to access the bcli
plugin once it's freed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's a legacy from when it didn't have an ld pointer to access ld's
timer structure. Now it's just confusing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If commitment_revocation hook is not being used for a whatchtower but
something else, the channel_id is missing.
Changelog-Added: addes channel_id and commitnum to commitment_revocation hook
Changelog-Changed: Change order parameters in the listforwards command
Changelog-Deprecated: Change order of the status parameter in the listforwards rpc command.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Changelog-Deprecated: RPC framwork now require the "jsonrpc" propriety inside the request.
Changelog-Fixed: RPC framwork now required the "jsonrpc" propriety to be specified inside each request.
After some discussion with @shesek, and my own usage, we agreed that
a more comprehensive interface, which explicitly supports grouping,
is desirable.
Thus keys are now arrays, with the semantic that a key is either a
parent or has a value, never both.
For convenience in the JSON schema, we always return them as arrays,
though we accept simple strings as arguments.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We add a generation counter, and allow update or del conditional
on a given generation.
Formalizes error codes, too, since we have more now.
Suggested-by: @shesek
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `datastore`, `deldatastore` and `listdatastore` for plugins to store simple persistent key/value data.
This renames all occurences of use_proxy_always to always_use_proxy
to keep it inline with config values. This was a bit confusing.
Only significant change is that the payload in the plugins init
requests also contained the old name. No plugin currently seems to make
use of this variable yet. The old name 'use_proxy_always' is added when
deprecated APIs is enabled.
Changelog-Deprecated: Plugins: Renames plugin init 'use_proxy_always' to 'always_use_proxy'
This actually caused the flake in test_funding_reorg_private, where
l1 and l2 might not mark the original channel disabled. In fact, they
should *remove* it as it gets reorged out.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
dualopend doesn't always listen to lightningd messages, so it would
sometimes hang at the end of tests.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. We assumed an empty upfront_shutdown_script TLV would become NULL:
RPC call failed: method: fundchannel, payload: {'id': '022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59', 'amount': 1000000, 'announce': True}, error: {'code': -1, 'message': 'They sent error channel e7c2d5d14462fe269631418fbfc3db327843382e6a2a5a9c2991d2d6ba31d9f5: Unacceptable upfront_shutdown_script ', 'data': {'id': '022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59', 'method': 'fundchannel_start'}}"
2. We were assuming an empty enctlv would become NULL, too.
We should not have done this (there's a semantic difference between
"empty" and not-present for TLVs), so prepare for the change.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As requested by @shesek: it's weird to fail if they ask for the exact
same thing (which is quite possible, since offers don't expire by
default).
And add a new "created" field so they can tell if they have an old
one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we now use 'compact_lease' to gate an open (if the rates have
changed, we fail), we no longer need to rely on query rates for figuring
things out, so we make it dev-only.
Changelog-Changed: JSON-API: queryrates is now developer only
We need to know what the lease we're expecting is. To do this
we pass around the hex encoded portion of the wire format.
We can use this passed in expected lease rates to confirm that the peer
is, in fact, using the same rates as what we have currently.
Changelog-Added: JSON-RPC: fundchannel, multifundchannel, and openchannel_init now accept a 'compact_lease' for any requested funds
By default, we won't close a channel that we leased to a peer.
You can override this with the `force_lease_closed` flag.
Changelog-Added: JSON-RPC: close now has parameter to force close a leased channel (option_will_fund)
Typically we forget a channel if 2016 blocks have passed and
the funding transaction hasn't been mined yet, however we
SHOULD NOT forget these channels if we've got funds in them!
Useful for parsing a passed in feerate before calling lightningd with
it, e.g. when you need to know what the feerate is for a fundpsbt before
calling fundpsbt
Changelog-Added: JSON-RPC: new command `parsefeerate` which takes a feerate string and returns the calculated perkw/perkb
Rusty Russell
Christian Decker
Vincenzo Palazzo
niftynei
ZmnSCPxj jxPCSnmZ
Jan Sarenik
Simon Vrouwe
Michael Schmoock