We want to access this in db migrations, which happen very early, but
runes_init needs the db, creating a circular dependency which must be
split.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now we have defined ordering, we can add a start param.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listinvoices` has `index` and `start` parameters for listing control.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `setchannel` adds a new `ignorefeelimits` parameter to allow peer to set arbitrary commitment transaction fees on a per-channel basis.
`struct log` becomes `struct logger`, and the member which points to the
`struct log_book` becomes `->log_book` not `->lr`.
Also, we don't need to keep the log_book in struct plugin, since it has
access to ld's log_book.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We can expose the dbid, rather than pretending we have some "struct
invoice" which is actually just the dbid. And don't have a pile of
"wallet_" wrappers for redirection.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Previously, our code checked for the presence of the `lightning:`
prefix while decoding a bolt11 string. Although this prefix is valid
and accepted by the core lightning pay command, it was causing issues
with how we managed invoices. Specifically, we were skipping the prefix
when creating a copy of the invoice string and storing the raw invoice
(including the prefix) in the database, which caused inconsistencies
in the user experience.
To address this issue, we need to strip the `lightning:` prefix before
calling each core lightning command. In addition, we should
modify the invstring inside the db with the canonical one.
This commit fixes the issue by stripping the `lightning:` prefix
from the `listsendpays` function, which will improve the
user experience and ensure consistency in our invoice management (see
next commit).
Reported-by: @johngribbin
Link: ElementsProject#6207
Fixes: debbdc0
Changelog-Fixes: trim the `lightning:` prefix from invoice everywhere.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
We usually have access to `ld`, so avoid the global.
The only place generic code needs it is for the json command struct,
and that already has accessors: add one for libplugin and lightningd
to tell it if deprecated apis are OK.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In most cases, it's the same as option_anchor_outputs, but for
fees it's different. This transformation is the simplest:
pass it as a pair, and test it explicitly.
In future we could rationalize some paths, but this was nice
and mechanical.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we can CPFP, we don't have to track the feerate as closely. But
it still needs to get in the mempool, so we use 10 sat/byte, or the
100 block estimate if that is higher.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `feerates` has new fields `unilateral_anchor_close` to show the feerate used for anchor channels (currently experimental), and `unilateral_close_nonanchor_satoshis`.
Changelog-Changed: JSON-RPC: `feerates` `unilateral_close_satoshis` now assumes anchor channels if enabled (currently experimental).
We don't actually use it anywhere, but we actually want to now for
CPFP. So give it more parameters and make it return bool so it can
be set without necessarily suppressing rexmit.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now we wire in the code which gathers configvars and parses from there;
lightningd keeps the array of configuration variables for future use.
Note that lightning-cli also needs to read the config, but it has its
own options (including short ones!) and doesn't want to use this
configvar mechanism, so we have a different API for that now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And consolidate descriptions into lightning-feerates().
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `close`, `fundchannel`, `fundpsbt`, `multifundchannel`, `multiwithdraw`, `txprepare`, `upgradewallet`, `withdraw` now allow "minimum" and NN"blocks" as `feerate` (`feerange` for `close`).
Drop try_get_feerate() in favor of explicit feerate_for_deadline() and
smoothed_feerate_for_deadline().
This shows us everywhere we deal with old-style feerates by names.
`delayed_to_us` and `htlc_resolution` will be moving to dynamic fees,
so deprecate those.
Note that "penalty" is still used for generating penalty txs for
watchtowers, and "unilateral_close" still used until we get zero-fee
anchors.
Changelog-Added: JSON-RPC: `feerates` `estimates` array shows fee estimates by blockcount from underlying plugin (usually *bcli*).
Changelog-Changed: JSON-RPC: `close`, `fundchannel`, `fundpsbt`, `multifundchannel`, `multiwithdraw`, `txprepare`, `upgradewallet`, `withdraw` `feerate` (`feerange` for `close`) value *slow* is now 100 block-estimate, not half of 100-block estimate.
Changelog-Deprecated: JSON-RPC: `close`, `fundchannel`, `fundpsbt`, `multifundchannel`, `multiwithdraw`, `txprepare`, `upgradewallet`, `withdraw` `feerate` (`feerange` for `close`) expressed as, "delayed_to_us", "htlc_resolution", "max_acceptable" or "min_acceptable". Use explicit block counts or *slow*/*normal*/*urgent*/*minimum*.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fun story. We're changing onchaind to hand txs to us, and we will
construct them and do the broadcast for it. lightningd tells onchaind
the witness it used (with flags to indicate which fields were
signatures so should be ignored) so onchaind can recognize the tx
when/if it is mined.
And when onchaind was waiting for a CLTV delay, it wouldn't tell
lightningd yet, but wait until the parent was sufficiently deep
But this caused bugs!
In particular, on replay, onchaind would see transactions which it
hasn't sent yet. This was not a problem before, as onchaind had
created the tx, even if it hadn't told lightningd to broadcast it, so
recognized the variant when it came in. When we're relying on
lightningd to tell us what the tx will look like, this doesn't work
any more.
The cause of this is that we fire off txowatches ("this output was
spent!") while we process blocks, and only fire off txwatches ("this
tx increased depth") once all the current blocks are processed. Often
this didn't matter, since we replay messages to onchaind from the
database, *but* we trim the last few blocks on restart (or, if there's
a small reorg while we're stopped), and we can hit this misordering.
Changing our topology code to only ever process one block at a time
would be a solution, but slows down catchup (and tests, where we often
mine a run of blocks).
So, this seems like a premature optimization, but it's really
required! And in future, lightningd can use this knowledge of pending
transactions to combine them in more clever ways.
Note that if a tx is valid at block N, we broadcast it once we see
block N-1, to get it in the mempool for block N.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
At the moment only lightingd needs it, and this avoids missing any
places where we do bip32 derivation.
This uses a hsm capability to mean we're backwards compatible with older
hsmds.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: we now always double-check bitcoin addresses are correct (no memory errors!) before issuing them.
It's needed as the db and wallet is being set up (db migrations), so
it's simpler this way to always use ld->bip32_base for the next patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When a channel open fails, we use tx-abort instead of warning/error.
This means that the peer won't disconnect! And instead when a new
message arrives, we'll need to rebuild the dualopend subd (if missing).
Makes opens a bit easer to retry (no reconnect needed), as well as keeps
the connection alive for other channels we may have with that peer.
Changelog-Changed: Experimental-Dual-Fund: open failures don't disconnect, but instead fail the opening process
We didn't actually populate them properly, and the real annotations
are on inputs and outputs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: JSON-RPC: `listtransactions` `channel` and `type` field removed at top level.
Also, we don't need to pass the total length to the field parsers,
just the length for this field (confusingly, this was called
"data_length").
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
After connecting 100,000 peers with one channel each (not all at
once!), we see various places where we exhibit O(N^2) behaviour.
Fix these by keeping a map of id->peer instead of a simple
linked-list.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're soon going to call json_add_unsaved_channel and
json_add_uncommitted_channel from a new place, where we want the peer
state directly included.
Based on patch by @vincenzopalazzo.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was found by tests/test_plugin.py::test_important_plugin and
was NOT a flake!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-None: only just committed
I know this is an unforgivably large diff, but the spec has changed so
much that most of this amounts to a rewrite.
Some points:
* We no longer have "offer_id" fields, we generate that locally, as all
offer fields are mirrored into invoice_request and then invoice.
* Because of that mirroring, field names all have explicit offer/invreq/invoice
prefixes.
* The `refund_for` fields have been removed from spec: will re-add locally later.
* quantity_min was removed, max == 0 now mean "must specify a quantity".
* I have put recurrence fields back in locally.
This brings us to 655df03d8729c0918bdacac99eb13fdb0ee93345 ("BOLT 12:
add explicit invoice_node_id.")
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The "path" is just a message to ourselves. This meets the minimal
requirement for bolt12 invoices: that there be a blinded path (at
least so we can use the path_id inside in place of "payment_secret").
We expose the method to make this path_id to a common routine: offers
will need this for generating more sophisticated paths.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Christian Decker
Rusty Russell
Vincenzo Palazzo
niftynei
Ken Sedgwick