I tested this indeed breaks if we don't accept it, then implemented
the code to accept it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: protocol: We now correctly accept the `option_scid_alias` bit in `open_channel` `channel_type`.
Changelog-Deprecated: protocol: Not setting `option_scid_alias` in `option_channel` `channel_type` for unannounced channels.
Libwally update breaks compatibility, so
we do this in one large step.
Changelog-Changed: JSON-RPC: elements network PSET now only supports PSETv2.
Changelog-Added: JSON-RPC: PSBTv2 supported for fundchannel_complete, openchannel_update, reserveinputs, sendpsbt, signpsbt, withdraw and unreserveinputs parameter psbt, openchannel_init and openchannel_bump parameter initialpsbt, openchannel_signed parameter signed_psbt and utxopsbt parameter utxopsbt
- Renamed zerod_channel_ids to temporary_channel_id
- Renamed witness_stack->witnesses
- Renamed witness_element->witness_elements
- open_channel2 now includes second commitment point
- accept_channel2 now includes second commitment point
Current commit on rfc branch 64f7f360b9f3c2664d078e2129cfe83098fc4617
Changelog-EXPERIMENTAL: Protocol: dual-funding spec changed in incompatible ways, won't work with old versions (but maybe soon with Eclair!!)
It's not likely but possible that the node's settings will shift btw a
start and an RBF; we persist the setting to the database so we don't
lose it.
Right now holding onto it forever is kind of extra but maybe we'll
reuse the setting for splices? idk.
Should this be a channel type??
`openchannel_init` takes a psbt, which we pipe over to dualopend
process.
If the peer requests that they'll only accept confirmed inputs, we need
to go validate those before we continue.
This wires up the harness for this (validation check yet tc)
Wait until we get a tx-abort back to terminate the process.
Nota Bene: this can cause RPC calls to hang if the peer never
responds back with tx-abort.
Note that we also have to re-route how open-abort + negotiation_failed
handle failures, as open_abort no longer closes the process
automagically.
When a channel open fails, we use tx-abort instead of warning/error.
This means that the peer won't disconnect! And instead when a new
message arrives, we'll need to rebuild the dualopend subd (if missing).
Makes opens a bit easer to retry (no reconnect needed), as well as keeps
the connection alive for other channels we may have with that peer.
Changelog-Changed: Experimental-Dual-Fund: open failures don't disconnect, but instead fail the opening process
Prior to this we might end up with a commitment transaction without
any outputs, if combined with `--dev-allowdustreserve`. Otherwise the
reserve being larger than dust means the funder could not drop its
direct output to be below dust.
Reported-by: Rusty Russell <@rustyrussell>
Technically this is a non-conformance with the spec, hence the `dev`
flag to opt-in, however I'm being told that it is also implemented in
other implementations. I'll follow this up with a proposal to the spec
to remove the checks we now bypass.
This check, while in line with the specification, would cause issues
in mixed setups when the funder or fundee allows dust reserves, but
the counterparty does not. It is not an issue for the non-dust reserve
node since in this case it's the peer giving us more flexibility not
the other way around.
Technically this is a non-conformance with the spec, hence the `dev`
flag to opt-in, however I'm being told that it is also implemented in
other implementations. I'll follow this up with a proposal to the spec
to remove the checks we now bypass.
This is incompatible with the spec as it removes the enforcement for
reserves being above dust, but from what I can see from other
implementations it seems that others have allowed this as well.
This commit just guards the necessary changes with compilation guards, so
we can decide either way quickly. This part of the PR is not intended
to be final, just as a discussion basis.
Add memleak_ignore_children() so callers can do exclusions themselves.
Having two exclusions was always such a hack!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1) dualopen has fd to connectd
2) channeld needs to take over
3) dualopen passes fd that leads to a connectd over for channeld to use
4) lightningd must receive the fd transfer request and process
5) dualopen shuts down and closes everything it owns
4 & 5 end up in a race. If 5 happens before 4, channeld ends up with an invalid fd for connectd — leaving it in a position to not receive messages.
Lingering for a second makes 4 win the race. Since the daemon is closing anyway, waiting for a second should be alright.
Changelog-Fixed: Fixed a condition for newly created channels that could trigger a need for reconnect.
This alters the billboard, but that's a human-readable thing so not
noted in CHANGELOG.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `listpeers` `status` now refers to "channel ready" rather than "funding locked" (BOLT language change for zeroconf channels)
Changelog-Added: JSON-RPC: `channel_opened` notification `channel_ready` flag.
Changelog-Deprecated: JSON-RPC: `channel_opened` notification `funding_locked` flag (use `channel_ready`: BOLTs namechange).
This contains the zeroconf stuff, with funding_locked renamed to
channel_ready. I change that everywhere, and try to fix up the
comments.
Also the `alias` field is called `short_channel_id`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: `funding_locked` is now called `channel_ready` as per latest BOLTs.
1. fromwire now allocates TLVs, so this was actually a leak.
2. We can simply hand "NULL" to towire_, since that is the same as
this empty tlv.
```
...89221a0054c11c1e3ca31d59-dualopend-chan#1: MEMLEAK: 0x56148649c458
...89221a0054c11c1e3ca31d59-dualopend-chan#1: label=wire/peer_exp_wiregen.c:1041:struct tlv_channel_reestablish_tlvs
...89221a0054c11c1e3ca31d59-dualopend-chan#1: backtrace:
...89221a0054c11c1e3ca31d59-dualopend-chan#1: /home/rusty/devel/cvs/lightning/ccan/ccan/tal/tal.c:442 (tal_alloc_)
...89221a0054c11c1e3ca31d59-dualopend-chan#1: /home/rusty/devel/cvs/lightning/wire/peer_exp_wiregen.c:1041 (tlv_channel_reestablish_tlvs_new)
...89221a0054c11c1e3ca31d59-dualopend-chan#1: /home/rusty/devel/cvs/lightning/openingd/dualopend.c:3536 (do_reconnect_dance)
...89221a0054c11c1e3ca31d59-dualopend-chan#1: /home/rusty/devel/cvs/lightning/openingd/dualopend.c:3955 (main)
...89221a0054c11c1e3ca31d59-dualopend-chan#1: ../sysdeps/nptl/libc_start_call_main.h:58 (__libc_start_call_main)
...89221a0054c11c1e3ca31d59-dualopend-chan#1: ../csu/libc-start.c:392 (__libc_start_main_impl)
...89221a0054c11c1e3ca31d59-dualopend-chan#1: parents:
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
With `option_zeroconf` we may now send `channel_ready` at any time we
want, rendering the `mindepth` parameter a mere heads up. We ignore it
in favor of our own value, since we plan to trigger releasing the
`channel_ready` once we reach our own depth.
We do this (send warnings) in almost all cases anyway, so mainly this
is a textual update, but there are some changes:
1. Send ERROR not WARNING if they send a malformed commitment secret.
2. Send WARNING not ERROR if they get the shutdown_scriptpubkey wrong (vs upfront)
3. Send WARNING not ERROR if they send a bad shutdown_scriptpubkey (e.g. p2pkh in future)
4. Rename some vars 'err' to 'warn' to make it clear we send a warning.
This means test_option_upfront_shutdown_script can be made reliable, too,
and it now warns and doesn't automatically close channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This doesn't have an effect now (except in experimental mode), but it
will when we support anchors. So we deprecate the use of those in the
close command too.
For experimental mode we have to avoid using p2pkh; adapt that test.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSON-RPC: `shutdown` no longer allows p2pkh or p2sh addresses.
Requiring the caller to allocate them is ugly, and differs from
other types.
This means we need a context arg if we don't have one already.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means lightningd needs to create the temporary one and tell it to
openingd/dualopend, rather than the other way around.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't need to hand it to channeld: it will read it! We simply
need to tell it to expect it.
Similarly, openingd/dualopend will never see it, so remove that logic.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Either because lightningd tells us it wants to talk, or because the peer
says something about a channel.
We also introduce a behavior change: we disconnect after a failed open.
We might want to modify this later, but we it's a side-effect of openingd
not holding onto idle connections.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
openingd currently holds the connection to idle peers, but we're about
to change that: it will only look after peers which are actively
opening a connection. We can start this process by disconnecting
whenever we have a negotiation failure.
We could stay connected if we wanted to, but that would be up to
connectd to decide. Right now it's easier if we disconnect from any
idle peer once it's been active.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Next patch re-enables runtime leak checking for dualopend, so fix those
leak reports.
In some cases, this menas allocating off tmpctx or state->channel
(which gets reset on failure), not state. The problem with tmpctx is
that there are event loops in the *middle* of some functions, which
free it. So for RBF functions we use a rbf_ctx temporary (with leak
detection suppressed, like it is for tmpctx), then be careful to free
it on all exits!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is neater than what we had before, and slightly more general.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON_RPC: `sendcustommsg` now works with any connected peer, even when shutting down a channel.
Once we send funding_locked, gossipd could start seeing channel_updates
from the peer (which get sent so we can use the channel in routehints
even before it's announcable).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was put in late 2019, and @t-bast says Eclair doesn't ignore their
errors and has had no issues.
It also conflicts with https://github.com/lightning/bolts/pull/932
which suggests you *should* fail when you receive an error.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We now let gossipd do it.
This also means there's nothing left in 'struct per_peer_state' to
send across the wire (the fds are sent separately), so that gets
removed from wire messages too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As connectd handles more packets itself, or diverts them to/from gossipd,
it's the only place we can implement the dev_disconnect logic.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now connectd is doing the crypto, we can use normal wire io. We
create helper functions to clearly differentiate between "peer" comms
and intra-daemon comms though.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
connectd is going to end up using this do demux; make it fast and complete.
Fixing this reveals a problem in openingd: it now extracts the channel_id
from funding_signed (which is where we transition off the temporary), and
gets upset. So fix that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to stash/save the amount of the lease fees on a leased channel,
we do this by re-using the 'push' amount field on channel (which is
technically correct, since we're essentially pushing the fee amount to
the peer).
Also updates a bit of how the pushes are accounted for (pushed to now
has an event; their channel will open at zero but then they'll
immediately register a push event).
Leases fees are treated exactly the same as pushes, except labeled
differently.
Required adding a 'lease_fee' field to the inflights so we keep track of
the fee for the lease until the open happens.
And turn "" includes into full-path (which makes it easier to put
config.h first, and finds some cases check-includes.sh missed
previously).
config.h sets _GNU_SOURCE which really needs to be done before any
'#includes': we mainly got away with it with glibc, but other platforms
like Alpine may have stricter requirements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is from 6e99c5feaf60cb797507d181fe583224309318e9
We renamed the enctlv field to encrypted_recipient_data in the spec, and the
new onion_message is message 513. We don't handle it until the next patch.
Two renames:
1. blinding_seed -> blinding_point.
2. enctlv -> encrypted_recipient_data.
We don't do a compat cycle for our JSON APIs for these experimental
features only used by our own plugins, we just rename.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Temporarily disable sendpay_blinding test which uses obsolete onionmsg;
there's still some debate on the PR about how blinded HTLCs will work.
Changelog-EXPERIMENTAL: onionmessage: removed support for v0.10.1 onion messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
To reduce the surface area of amount of a channel balance that can be
eaten up as htlc dust, we introduce a new config
'--max-dust-htlc-exposure-msat', which sets the max amount that any
channel's balance can be added as dust
Changelog-Added: config: new option --max-dust-htlc-exposure-msat, which limits the total amount of sats to be allowed as dust on a channel
By popular merge-hell demand.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Build: Python is now required to build, as generated files are no longer checked into the repository.
One change from the obsolete version handling, gossipd will no longer send
forwarding onion msgs to lightningd, but will forward it directly.
That was the effect before, anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before:
Ten builds, laptop -j5, no ccache:
```
real 0m36.686000-38.956000(38.608+/-0.65)s
user 2m32.864000-42.253000(40.7545+/-2.7)s
sys 0m16.618000-18.316000(17.8531+/-0.48)s
```
Ten builds, laptop -j5, ccache (warm):
```
real 0m8.212000-8.577000(8.39989+/-0.13)s
user 0m12.731000-13.212000(12.9751+/-0.17)s
sys 0m3.697000-3.902000(3.83722+/-0.064)s
```
After:
Ten builds, laptop -j5, no ccache: 8% faster
```
real 0m33.802000-35.773000(35.468+/-0.54)s
user 2m19.073000-27.754000(26.2542+/-2.3)s
sys 0m15.784000-17.173000(16.7165+/-0.37)s
```
Ten builds, laptop -j5, ccache (warm): 1% faster
```
real 0m8.200000-8.485000(8.30138+/-0.097)s
user 0m12.485000-13.100000(12.7344+/-0.19)s
sys 0m3.702000-3.889000(3.78787+/-0.056)s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is best-practice (to ensure prototypes match up), but there were a
few places we didn't (at least, directly). Make it a requirement,
either of form "foo.h" or <dir/foo.h>.
The noise is the change to our print templates.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was just a minor leak, found by CI for
test_openchannel_hook_chaining. We didn't call negotiation_aborted
which frees various fields: negotiation_failed() does that for us.
```
MEMLEAK: 0x55b0f2d5f3c8
label=common/channel_type.c:19:struct channel_type
backtrace:
ccan/ccan/tal/tal.c:442 (tal_alloc_)
common/channel_type.c:19 (channel_type_none)
common/channel_type.c:27 (channel_type_static_remotekey)
common/channel_type.c:136 (channel_type_accept)
openingd/openingd.c:844 (fundee_channel)
openingd/openingd.c:1240 (handle_peer_in)
openingd/openingd.c:1510 (main)
parents:
openingd/openingd.c:1414:struct state
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
e.g. you can negotiate anchor_outputs, but still ask for a
non-anchor-output channel.
If/when we make those features compulsory, downgrade will
not be allowed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It was merged (but this doesn't update the BOLT quotes, that's in another patch).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: We now send and support channel_type in channel open (not dual-funding though).
Currently we actually insist it's the default, but in future it could be
different.
We also need to tell openingd what the channel_type was, if we resume
via openingd_funder_complete().
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We make it a first-class citizen internally, even though we won't use
it over the wire (at least, non-experimental builds). This scheme
follows the latest draft, in which features are flagged compulsory.
We also add several helper functions.
Since uses the *even* bits (as per latest spec), not the *odd* bits,
we have some other fixups.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We want to use this to handle the simple description for channel_type.
It also needs to handle variable-size types (just like subtypes).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Greg Sanders
adi2011
niftynei
Michael Schmoock
Christian Decker
Dustin Dettmer
Ken Sedgwick
Vincenzo Palazzo