Rename tor_proxyaddrs and tor_serviceaddrs to tor_proxyaddr and tor_serviceaddr:
the 's' at the end suggests that there can be more than one.
Make them NULL or non-NULL, rather than using all-zero if unset.
Hand them the same way to gossipd; it's a bit of a hack since we don't
have optional fields, so we use a counter which is always 0 or 1.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a rebased and combined patch for Tor support. It is extensively
reworked in the following patches, but the basis remains Saibato's work,
so it seemed fairest to begin with this.
Minor changes:
1. Use --announce-addr instead of --tor-external.
2. I also reverted some whitespace and unrelated changes from the patch.
3. Removed unnecessary ';' after } in functions.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Someone could try to announce an internal address, and we might probe
it.
This breaks tests, so we add '--dev-allow-localhost' for our tests, so
we don't eliminate that one. Of course, now we need to skip some more
tests in non-developer mode.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we're given a wildcard address, we can't announce it like that: we need
to try to turn it into a real address (using guess_address). Then we
use that address. As a side-effect of this cleanup, we only announce
*any* '--addr' if it's routable.
This fix means that our tests have to force '--announce-addr' because
otherwise localhost isn't routable.
This means that gossipd really controls the addresses now, and breaks
them into two arrays: what we bind to, and what we announce. That is
now what we return to the master for json_getinfo(), which prints them
as 'bindings' and 'addresses' respectively.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Add special option where an empty host means 'wildcard for IPv4 and/or IPv6'
which means ':1234' can be used to set only the portnum.
2. Only add this protocol wildcard if --autolisten=1 (default)
and no other addresses specified.
3. Pass it down to gossipd, so it can handle errors correctly: in most cases,
it's fatal not to be able to bind to a port, but for this case, it's OK
if we can only bind to one of IPv4/v6 (fatal iff neither).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This replacement is a little menial, but it explicitly catches all
the places where we allow a local socket. The actual implementation of
opening a AF_UNIX socket is almost hidden in the patch.
The detection of "valid address" is now more complex:
p->addr.itype != ADDR_INTERNAL_WIREADDR || p->addr.u.wireaddr.type != ADDR_TYPE_PADDING
But most places we do this, we should audit: I'm pretty sure we can't
get an invalid address any more from gossipd (they may be in db, but
we should fix that too).
Closes: #1323
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It does all the other address handling, do this too. It also proves useful
as we clean up wildcard address handling.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's become clear that our network options are insufficient, with the coming
addition of Tor and unix domain support.
Currently:
1. We always bind to local IPv4 and IPv6 sockets, unless --port=0, --offline,
or any address is specified explicitly. If they're routable, we announce.
2. --addr is used to announce, but not to control binding.
After this change:
1. --port is deprecated.
2. --addr controls what we bind to and announce.
3. --bind-addr/--announce-addr can be used to control one and not the other.
4. Unless --autolisten=0, we add local IPv4 & IPv6 port 9735 (and announce if they are routable).
5. --offline still overrides listening (though announcing is still the same).
This means we can bind to as many ports/interfaces as we want, and for
special effects we can announce different things (eg. we're sitting
behind a port forward or a proxy).
What remains to implement is semi-automatic binding: we should be able
to say '--addr=0.0.0.0:9999' and have the address resolve at bind
time, or even '--addr=0.0.0.0:0' and have the port autoresolve too
(you could determine what it was from 'lightning-cli getinfo'.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We set no_reconnect with --offline, but that doesn't work if !DEVELOPER.
Make the flag positive, and non-DEVELOPER mode for gossipd.
We also don't override portnum with --offline, but have an explicit
'listen' flag.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means gossipd is live and we can tell it things, but it won't
receive incoming connections. The split also means that the main daemon
continues (eg. loading peers from db) while gossipd is loading from the store,
potentially speeding startup.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently we intuit it from the fd being closed, but that may happen out
of order with when the master thinks it's dead.
So now if the gossip fd closes we just ignore it, and we'll get a
notification from the master when the peer is disconnected.
The notification is slightly ugly in that we have to disable it for
a channel when we manually hand the channel back to gossipd.
Note: as stands, this is racy with reconnects. See the next patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This was sitting in my gossip-enchancement patch queue, but it simplifies
this set too, so I moved it here).
In 94711969f we added an explicit gossip_index so when gossipd gets
peers back from other daemons, it knows what gossip it has sent (since
gossipd can send gossip after the other daemon is already complete).
This solution is insufficient for the more general case where gossipd
wants to send other messages reliably, so replace it with the other
solution: have gossipd drain the "gossip fd" which the daemon returns.
This turns out to be quite simple, and is probably how I should have
done it originally :(
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Lifetime of 'struct reaching' now only while we're actively doing connect.
2. Always free after a single attempt: if it's an important peer, retry
on a timer.
3. Have a single response message to master, rather than relying on
peer_connected on success and other msgs on failure.
4. If we are actively connecting and we get another command for the same
id, just increment the counter
The result is much simpler in the master daemon, and much nicer for
reconnection: if they say to connect they get an immediate response,
rather than waiting for 10 retries. Even if it's an important peer,
it fires off another reconnect attempt, unless it's actively
connecting now.
This removes exponential backoff: that's restored in next patch. It
also doesn't handle multiple addresses for a single peer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And on channel_fail_permanent and closing (the two places we drop to
chain), we tell gossipd it's no longer important.
Fixes: #1316
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These don't have a maximum number of reconnect attempts, and ensure
that we try to reconnect when the peer dies.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're about to remove automatic retrying of connect, and that uncovered
that we actually print out our "Server started" message before we create
the listening socket.
Move the init higher (outside the db transaction) and make it a
request/response, the loop until it's done.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Internally both payment and routing use 64-bit, but the interface
between them used 32-bit.
Since both components already support 64-bit we should use that.
If we only remember the actions that added channels then we'd restore them when
re-reading the gossip_store, so put a tombstone in there to remember to delete
it. These will be cleared upon re-writing the store since the announcements wont
be written anymore.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Since we may want to extend the on-disk format by adding custom information we
may as well just go the extra mile and reuse the serialization primitives we
already have.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
It's just a sha256_double, but importantly when we convert it to a
string (in type_to_string, which is used in logging) we use
bitcoin_blkid_to_hex() so it's reversed as people expect.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Couldn't find a good place to put these messages, we probably want to
do the same capability based request routing that we did for the HSM,
but for now this just defines the message in the master messages file.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
When gossipd sends a message, have a gossip_index. When it gets back a
peer, the current gossip_index is included, so it can know exactly where
it's up to.
Most of this is mechanical plumbing through openingd, channeld and closingd,
even though openingd and closingd don't (currently) read gossip, so their
gossip_index will be unchanged.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
All peers come from gossipd, and maintain an fd to talk to it. Sometimes
we hand the peer back, but to avoid a race, we always recreated it.
The race was that a daemon closed the gossip_fd, which made gossipd
forget the peer, then master handed the peer back to gossipd. We stop
the race by never closing the gossipfd, but hand it back to gossipd
for closing.
Now gossipd has to accept two fds, but the handling of peers is far
clearer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And we report these through the getpeers JSON RPC again (carefully: in
our reconnect tests we can get duplicates which this patch now filters
out).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In future it will have TOR support, so the name will be awkward.
We collect the to/fromwire functions in common/wireaddr.c, and the
parsing functions in lightningd/netaddress.c.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Saibato
ZmnSCPxj
Christian Decker
John Barboza