Since we open with O_APPEND, any write() will append as we want it to.
But we want to distinguish a new store creation from a truncation due
to bad version.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we only remember the actions that added channels then we'd restore them when
re-reading the gossip_store, so put a tombstone in there to remember to delete
it. These will be cleared upon re-writing the store since the announcements wont
be written anymore.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This stores and reads the channel_announcements in the wrapping message which
allows us to store associated data with the raw channel_announcements.
The gossip_store applies channel_announcements directly but it also returns it,
and it gets discarded as a duplicate. In the next commit we'll have gossip_store
apply all changes, bypassing verification, so the duplication is only temporary.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
As we add more features, the current code is insufficient.
1. Keep an array of single feature bits, for easy switching on and off.
2. Create feature_offered() which checks for both compulsory and optional
variants.
3. Invert requires_unsupported_features() and unsupported_features()
which tend to be double-negative, all_supported_features() and
features_supported().
4. Move single feature definition from wire/peer_wire.h to common/features.h.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We only access via index. We do, however, want to clean up when we
delete nodes and channels, so we tie lifetimes to that. This leads
us to put the index into 'struct queued_message'.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If the channel is pending, we queue the node_announcment and if the channel
is OK we re-call process_node_announcement. Make sure that second call
won't fail if the first succeeded.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We already have 'struct node', so rename 'struct routing_channel' to
'struct chan', and 'struct node_connection' to 'struct half_chan'.
Other minor changes:
1. rstate->channels -> rstate->chanmap.
2. 'connections' -> 'half'.
3. connection_to -> half_chan_to
4. connection_from -> half_chan_from
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Returning the separate first routing_channel was a weird API: just
return the entire array. Sure, we have to treat the first node a bit
differently (because we don't charge ourselves fees), but it's still
simpler.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
To remove the redundant fields in `struct node_connection` (ie. 'src'
and 'dst' pointers) we need to deal with `struct routing_channel`.
This means we get a series of channels, from which the direction is
implied, so it's a bit more complex to decode. We add a helper
`other_node` to help with this, and since we're the only user of
`connection_to` we change that function to return the index.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is twice the 'update_channel_interval' we get handed.
We delete the non-existent channel_add_connection and delete_connection
declarations from the header too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We make new_routing_channel() populate both connections
(active=false), so local_add_channel becomes simpler. We also
suppress listchannels output of active=false unannounced channels, to
avoid breaking tests (also, these are unusable, so it makes sense to
omit them)
It also seems the logic in add_channel_direction is legacy: a
channel_announce cannot replace the scid (that would be a different
channel), we don't allow duplicate announcements, and the announcement
is never NULL.
And since we disallow repeated channel_announce already, I believe
'forward' is always true, greatly simplifying the logic in
handle_pending_cannouncement.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This makes 'routing_channel' the primary object in the system; it can have
one or two 'node_connection's attached, and points to two nodes.
The nodes are freed when no more routing_channel refer to them. The
routing_channel are freed when they contain no more 'node_connection'.
This fixes#1072 which I surmise was caused by a dangling
routing_channel after pruning.
Each node contains a single array of 'routing_channel's, not one for
each direction. The 'routing_channel' itself orders nodes in key
order (conveniently the index is equal to the direction flag we use),
and 'node_connection' with source in the same order.
There are helpers to assist with common questions like "which
'node_connection' leads out of this node?".
There are now two ways to find a channel:
1. Direct scid lookup via rstate->channels map.
2. Node key lookup, followed by channel traversal.
Several FIXMEs are inserted for where we can now do things more optimally.
Fixes: #1072
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We always hand in "NULL" (which means use tal_len on the msg), except
for two places which do that manually for no good reason.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now we have wirestring, this is much more natural. And with the
24M length limit, we needn't be so concerned about dumping 64k peer
messages in hex.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The use of status_failed() requires a stubs update, which fails
with unnamed parameters, so tweak the status.h header as well.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We should never be evicting channel_announcements because a) they were
deeply buried and should not change the short_channel_id/tag, b) they
are static.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
It's just a sha256_double, but importantly when we convert it to a
string (in type_to_string, which is used in logging) we use
bitcoin_blkid_to_hex() so it's reversed as people expect.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If channel_announce is rebroadcast, it should replace the existing one
in-place. We currently only do this if we start from the unsigned one
and replace it with the signed one when we hit 6 confirms.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This would fail, and we'd free an uninitialized pointer.
Also, add us to .gitignore and clear up a comment.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We can't get them; channel_update doesn't support it.
# 1M nodes:
$ /gossipd/test/run-bench-find_route 1000000 1 > /tmp/out
=> 47677 msec
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Compile this, and link from perfme-start and perfme-stop in your path:
/* Simple wrapper to allow a program to perf itself.
* Copyright Rusty Russell, Blockstream 2015.
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* See <http://www.gnu.org/licenses/>.
*/
#include <ccan/err/err.h>
#include <ccan/str/str.h>
#include <sys/types.h>
#include <unistd.h>
#include <signal.h>
#include <errno.h>
#include <stdio.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <stdlib.h>
#define PERFME_PREFIX "/tmp/perfme."
#define MAX_ENV_ARGS 20
static void write_noerr(int fd)
{
int e = errno;
if (write(fd, "", 1) != 1)
/* Complain about warn_unused_result fascist bullshit */ ;
errno = e;
}
/* Child. Setup pid, run perf. */
static void exec_perf(int pfd[2], const char *perfpid, const char *perfout,
pid_t parent)
{
char pid[STR_MAX_CHARS(pid_t)];
int i, fd;
char *cmd, *args[MAX_ENV_ARGS + 5];
fd = open(perfpid, O_CREAT|O_EXCL|O_WRONLY, 0400);
if (fd < 0) {
write_noerr(pfd[1]);
err(1, "opening %s", perfpid);
}
sprintf(pid, "%u", getpid());
if (write(fd, pid, strlen(pid)) != strlen(pid)) {
write_noerr(pfd[1]);
err(1, "writing to %s", perfpid);
}
close(fd);
sprintf(pid, "%u", parent);
cmd = getenv("PERFME");
if (!cmd)
cmd = "perf record --call-graph dwarf -q";
cmd = strdup(cmd);
for (i = 0; i < MAX_ENV_ARGS; i++) {
args[i] = strtok(i == 0 ? cmd : NULL, " ");
if (!args[i])
break;
}
if (i == 0 || i == MAX_ENV_ARGS)
errx(1, "Too %s args in $PERFME: '%s'",
i ? "many" : "few", getenv("PERFME"));
args[i++] = "-p";
args[i++] = pid;
args[i++] = "-o";
args[i++] = (char *)perfout;
args[i++] = NULL;
execvp(args[0], args);
write_noerr(pfd[1]);
err(1, "Execing %s", args[0]);
}
int main(int argc, char *argv[])
{
pid_t parent = argv[1] ? atoi(argv[1]) : getppid();
char perfout[sizeof(PERFME_PREFIX) + STR_MAX_CHARS(parent)];
char perfpid[sizeof(perfout) + sizeof(".pid")];
err_set_progname(argv[0]);
sprintf(perfpid, PERFME_PREFIX "%u.pid", parent);
if (strends(argv[0], "perfme-stop")) {
char pid[STR_MAX_CHARS(pid_t)];
int r, fd = open(perfpid, O_RDONLY);
if (fd < 0)
err(1, "Opening %s", perfpid);
r = read(fd, pid, sizeof(pid) - 1);
if (r < 0)
err(1, "Reading %s", perfpid);
pid[r] = 0;
if (unlink(perfpid) != 0)
warn("Unlinking %s", perfpid);
if (atoi(pid) <= 0)
errx(1, "Invalid pid '%s' from %s", pid, perfpid);
if (kill(atoi(pid), SIGTERM) != 0)
err(1, "Stopping %s", pid);
exit(0);
} else if (strends(argv[0], "perfme-start")) {
int pfd[2];
sprintf(perfout, PERFME_PREFIX "%u", parent);
/* Use pipe to detect successful exec. */
if (pipe(pfd) != 0)
err(1, "Creating pipe");
switch (fork()) {
case 0:
close(pfd[0]);
fcntl(pfd[1], F_SETFD,
fcntl(pfd[1], F_GETFD)|FD_CLOEXEC);
exec_perf(pfd, perfpid, perfout, parent);
case -1:
err(1, "Forking");
default:
/* Parent. Wait for child. */
close(pfd[1]);
if (read(pfd[0], perfpid, 1) == 1)
exit(1);
fprintf(stderr, "Perf recording into %s\n", perfout);
sleep(1);
exit(0);
}
}
errx(1, "Unknown name: am I perfme-start or perfme-stop?");
}
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Test objects must be added to $(ALL_OBJS) so they correctly depend on
CCAN headers etc.
Also, each test in a subdir must depend on headers and src in the parent
directory, as it will often #include them directly.
Reported-by: Christian Decker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In future it will have TOR support, so the name will be awkward.
We collect the to/fromwire functions in common/wireaddr.c, and the
parsing functions in lightningd/netaddress.c.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to derive this from the fd when they connect in, but we already
know it if we're connecting out.
We want this so we can tell (in next few patches) master the peer's address.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It makes it impossible to embed an ipaddr in another structure, since we
always try to skip over any zeroes, which may swallow a following field.
Do the skip specially for the case where we're parsing routing messages:
we never use padding for our own internal messages anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. The code to skip over padding didn't take into account max.
2. It also didn't use symbolic names.
3. We are not supposed to fail on unknown addresses, just stop parsing.
4. We don't use the read_ip/write_ip code, so get rid of it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I missed these when I removed the legacy daemon. We also remove the
min_blocks field which was always 0.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The test is could actually go each way, since for 1000000 the fee is
the same either way.
Increase to 300000, and add an extra test when the alternate path
is disabled.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I had a routing problem, and wrote a simple unit test which passed. So
I wrote one which copied the failure case (and importantly, had a non-1
fee factor), which triggerd it.
In that real example, we underflowed which resulted in us not finding
a route. Simply don't consider routes which are infinite.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Christian Decker
Rusty Russell
practicalswift
ZmnSCPxj