We use waitpid() manually for subdaemons, so we need to step
around that (otherwise we could simply ignore them).
We could destroy subdaemons only once they've exited, but
that works badly with the sd->conn, which will be freed
when error (i.e. close) is detected, so the current code
is probably the best compromise.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since this all stays in dualopend/dual_open_control, we can hold
onto the openchannel_signed command to wait for a response here locally.
Previously we were splitting across the channeld/openingd boundary.
This avoids duplication of both logic and error-prone values, such as
the salt. Grouping all hsm encryption logic into a public API will also
allow us to fuzz it.
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
`openchannel_signed` commands hang out across the openingd/channeld
boundary -- we don't return until we've successfully broadcast the
transaction (or timed out waiting for them to send a tx_sigs back).
The 100MB log buffer has been the biggest memory footprint for the daemon.
Keeping 10MB for emergency log dumps seems sufficient.
This has been mentioned in the last developer meeting.
Changelog-Changed: In-memory log buffer reduced from 100MB to 10MB
We're going to want this for bolt13 formation as well.
As a result of reworking the logic into "candidate selection" then
"route hint selection", we need to change the way round-robin works.
We use a simple incrementing index now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This removes the reservation cleanup at startup, too, now they're all
using 'reserved_til'.
This changes test_withdraw, since it asserted that outputs were marked
spent as soon as we broadcast a transaction: now they're reserved until
it's mined. Similarly, test_addfunds_from_block assumed we'd see funds
as soon as we broadcast the tx.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `withdraw` now randomizes input and output order, not BIP69.
we're about to add a migration that requires access to the bip32_key
in order to calculate missing scriptpubkeys.
prior to this patch, we don't have access to the bip32 key in the db
migration, as it's set on the wallet but after the db migrations are
run.
here we patch it through so that every migration can access it
Reduces VALGRIND=1 node_factory.line_graph(5) time on my laptop from 42s to 36s.
This is simply because forking all the subdaemons just to check the
version is very expensive under valgrind.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're going to use the hsm for a migration, so we need to set up the HSM
before we get to the wallet migration code.
All that this requires is removing the places in HSM init that we touch
the database struct -- easy enough to accomplish by passing the required
field back out from init, and then associating it onto the wallet after
it's been initialized.
This will allow the dynamic starting code to use them too.
Also lets us move dev_debug_subprocess under #if DEVELOPER.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use the new function `plugins_free` to define the correct deallocation
order on shutdown, since under normal operation the allocation tree is
organized to allow plugins to terminate and automatically free all dependent
resources. During shutdown the deallocation order is under-defined since
siblings may get freed in any order, but we implicitly rely on them staying
around.
common/onion is going to need to use this for the case where it finds a blinding
seed inside the TLV. But how it does ecdh is daemon-specific.
We already had this problem for devtools/gossipwith, which supplied a
special hsm_do_ecdh(). This just makes it more general.
So we create a generic ecdh() interface, with a specific implementation
which subdaemons and lightningd can use.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's almost always "their_features" and "our_features" respectively, so
make those names clear.
Suggested-by: @cdecker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Turns out that unnecessary: all callers can access the feature_set,
so make it much more like a normal primitive.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is to prepare for dynamic features, including making plugins first
class citizens at setting them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Instead of saving a stripped_update, we use the new
local_fail_in_htlc_needs_update.
One minor change: we return the more correct
towire_temporary_channel_failure when the node is still syncing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We make the current state of `lightningd` explicit so we don't have to
identify a shutdown by its side-effects. We then use this in order to prevent
the killing and freeing of plugins to continue down the chain of registered
plugins.
Changelog-Added: lightningd: Added --subdaemon command to allow alternate subdaemons.
[ Wow, that was mammoth; 44 comments over 12 commits. Feels almost unfair to squash it into one commit, so I wanted to note @ksedgwic's perseverence here! --RR ]
This is needed to fully implement handling of blockheight disagreements
between us and payee.
If payee believes the blockheight is higher than ours, then `pay`
should wait for our node to achieve that blockheight.
Changelog-Add: Implement `waitblockheight` to wait for a specific blockheight.
Thanks to @t-bast, who made this possible by interop testing with Eclair!
Changelog-Added: Protocol: can now send and receive TLV-style onion messages.
Changelog-Added: Protocol: can now send and receive BOLT11 payment_secrets.
Changelog-Added: Protocol: can now receive basic multi-part payments.
Changelog-Added: RPC: low-level commands sendpay and waitsendpay can now be used to manually send multi-part payments.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
AFAICT this only "worked" previously because replay htlc simply failed
them all (no peers are currently connected). With upcoming changes
(foreshadowed by the comment) this is no longer true:
Attempting to prepare a db_stmt outside of a transaction: wallet/invoices.c:373
lightningd: FATAL SIGNAL 6 (version v0.7.3-188-g45b0af4-modded)
0x55b475590a73 send_backtrace
common/daemon.c:41
0x55b475590b1d crashdump
common/daemon.c:54
0x7f16c557b46f ???
???:0
0x7f16c557b3eb ???
???:0
0x7f16c555a898 ???
???:0
0x55b475564c8f fatal
lightningd/log.c:814
0x55b4755c3ed5 db_prepare_v2_
wallet/db.c:605
0x55b4755c76b5 invoices_find_unpaid
wallet/invoices.c:373
0x55b4755ce91c wallet_invoice_find_unpaid
wallet/wallet.c:1990
0x55b47555861f invoice_check_payment
lightningd/invoice.c:257
0x55b475557a7c htlc_add_set
lightningd/htlc_set.c:112
0x55b47557b294 handle_localpay
lightningd/peer_htlcs.c:332
0x55b47557c63c htlc_accepted_hook_callback
lightningd/peer_htlcs.c:857
0x55b475585573 plugin_hook_call_
lightningd/plugin_hook.c:118
0x55b47557c747 plugin_hook_call_htlc_accepted
lightningd/peer_htlcs.c:882
0x55b47557ca3e peer_accepted_htlc
lightningd/peer_htlcs.c:991
0x55b47557ffb9 htlcs_resubmit
lightningd/peer_htlcs.c:2131
0x55b4755620f7 main
lightningd/lightningd.c:801
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This isn't plumbed in yet, but the idea is that every htlc gets put
into a "set" and then we process them once the set is satisfied. For
the !EXPERIMENTAL_FEATURES, the set is simply always size 1.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a transient field, so rework things so we don't leave it in
struct htlc_out. Instead, load htlc_in first and connect htlc_out to
them as we go.
This also changes one place where we use it instead of the am_origin
flag.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
lightning-cli is going to need to know what network we're on, so
it will need to parse the config files. Move the code which does
the initial bootstrap parsing into common, as well as the config
file parsing core.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This allows finegrained logging control of particular subdaemons or
subsystems.
To do this, we defer setting the logging levels for each log object
until after early argument parsing (since e.g. "bitcoind" log object
is created early).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-changed: Options: log-level can now specify different levels for different subsystems.
1. Printed form is always "[<nodeid>-]<prefix>: <string>"
2. "jcon fd %i" becomes "jsonrpc #%i".
3. "jsonrpc" log is only used once, and is removed.
4. "database" log prefix is use for db accesses.
5. "lightningd(%i)" becomes simply "lightningd" without the pid.
6. The "lightningd_" prefix is stripped from subd log prefixes, and pid removed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-changed: Logging: formatting made uniform: [NODEID-]SUBSYSTEM: MESSAGE
Changelog-removed: `lightning_` prefixes removed from subdaemon names, including in listpeers `owner` field.
We had a separate logbook for each peer, and copy log entries above
the printable log level into the master logbook. This didn't always
work well, since we didn't dump it on crash for example.
Keep a single global logbook instead, and remove this infrastructure.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
A log can have a default node_id, which can be overridden on a per-entry
basis. This changes the format of logging, so some tests need rework.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
==1310== Conditional jump or move depends on uninitialised value(s)
==1310== at 0x127C7F: io_loop_with_timers (io_loop_with_timers.c:30)
==1310== by 0x14F0E1: plugins_init (plugin.c:1019)
==1310== by 0x12E4B1: main (lightningd.c:694)
==1310==
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
niftynei
Antoine Poinsot
Jan Sarenik
Michael Schmoock
ZmnSCPxj jxPCSnmZ
Christian Decker
Ken Sedgwick