we weren't making records for 'missed' accounts that had a zero balance
at snapshot time (if peer opens channel and is unused)
Fixes: #5502
Reported-By: https://github.com/niftynei/cln-logmaid
Again, we should use the real channel_type, but we approximate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: private channels will only route using short-channel-ids if channel opened with option_scid_alias-supporting peer.
We *should* remember the channel type, since this is only required
if they set the channel_type to include option_scid_alias.
However, since we support channel upgrade, channel_type really needs
a new table. I have a patch for that, from my abandoned original
"fastopen" branch for aliases, but it's too big a chance for rc2 IMHO.
Meanwhile, we allow exposeprivatechannels's scids to be either real or
the aliases.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: invoice routehints will use fake short-channel-ids for private channels if channel opened with option_scid_alias-supporting peer.
So we print out invoice fees on the same line for those CSVs! This means
we have to do a little bit of gymnastics (but not too bad):
- we save the fee amount onto the income event now so we can use
it later
- we ignore every "invoice_fee" event for the koinly/cointracker
Note that since we're not skipping income events in the loops we also
move the newline character to the start of every `_entry` function so
skipped records dont incur empth lines.
Changelog-Added: bkpr: print out invoice fees on the same line for `koinly` and `cointracker` csv types
Adds schema definitions and manpages for bkpr- commands; also renames
the commands to all start with 'bkpr-', so they're easier to identify/
make runes about.
For income events, break out the amount paid in routing fees vs the
total amount of the *invoice* that is paid.
Also printout these fees, when available, on listaccountevents
Since it's a deprecation, we simply ignore one, rather than properly
checking they match etc.
Fixes: #5386
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We deprecated msatoshi, but getroute() still returns both (unless
--allow-deprecated-apis=False), so we need to accept both.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's one case where we can present more infomation, so do that, and
fix documentation.
Changelog-Added: JSON-RPC: `listforwards` now shows `out_channel` in more cases: even if it couldn't actually send to it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #5329
1. We set an outgoing htlc's `failonion` when we get a commitment_signed.
2. We don't transfer it to the corresponding incoming HTLC until we send
commitment_signed and receive revoke_and_ack (meaning, outgoing htlc is
completely dead).
3. If between these steps we go onchain, onchaind (after 3 blocks) tells us
to fail the HTLC.
4. hout->failonion is set, but hout->hin has not been failed yet. We
do a sanity check and print a nasty message, and fail it with
WIRE_PERMANENT_CHANNEL_FAILURE instead of relaying the error.
So handle this case explicitly.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We assumed that if the outgoing htlc has failed, we should have always
failed the incoming one. This is not true, as this testcase demonstrates:
```
lightningd-2: 2022-05-25T04:38:31.449Z DEBUG 035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d-onchaind-chan#2: Sending 1 missing htlc messages
lightningd-2: 2022-05-25T04:38:31.449Z DEBUG 035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d-chan#2: onchain_failed_our_htlc
lightningd-2: 2022-05-25T04:38:31.449Z DEBUG 035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d-chan#2: HTLC id 0 failonion = 0x55cb8bc045d8, failmsg = (nil), preimage = (nil)
lightningd-2: 2022-05-25T04:38:31.449Z **BROKEN** 035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d-chan#2: HTLC id 0 already complete, but ->in not resolved! failonion = 206816a391d3a7666ddd5213914cbb68f5da1fc4a0937e729de5a1990c94d26312caa5f2778e8da0c6bdefc68dd1a3bc28b5b5650fc0bdb3c2247ecca94ed0bbb224c8448c2c71eb1656a8740cadb301bd1ee1c1e774a8fef817352f502e4217b11e93aa6877b88b37afab0e4d4e49ed0385be9ab9a1ab1ac0e3460e41cfafb30ed896cea96e346041919a6c524ce56c3e5f27c7cd78a36b6df221e90a1c6e048c72b4146a5a51885fb70649037fe7ace77a016ae3ec8aee97960d0e5f0582713f671df79d8dee11b82708b6d882ee5adbb328db1938e824110f57ead1b27410bc6f775c7bb4ae40c1768d77a166c9bfda8f634ba0ac4f8a9fe199894dd3754c5ce41c9694544c805ffc177517661f11221dd8dffac60ce1c8c5bf54cda8e5ea44d8ec6b, failmsg = (null), preimage = (null)
lightningd-2: 2022-05-25T04:38:31.449Z **BROKEN** 035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d-chan#2: MISSING incoming fail for 0: failing incoming now
lightningd-2: 2022-05-25T04:38:31.449Z **BROKEN** 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518-chan#1: MISSED incoming fail for 0: failing now
lightningd-2: 2022-05-25T04:38:31.449Z DEBUG 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518-chan#1: HTLC in 0 RCVD_ADD_ACK_REVOCATION->SENT_REMOVE_HTLC
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We can sneak the HTLC add in before we do the update_fee which fails:
```
# the channel should start warning -- too much dust
inv = l2.rpc.invoice(htlc_val_msat, str(num_dusty_htlcs + 1), str(num_dusty_htlcs + 1))
with pytest.raises(RpcError, match=r'WIRE_TEMPORARY_CHANNEL_FAILURE'):
> l1.rpc.sendpay(route, inv['payment_hash'], payment_secret=inv['payment_secret'])
E Failed: DID NOT RAISE <class 'pyln.client.lightning.RpcError'>
tests/test_pay.py:2654: Failed
```
From the logs:
```
lightningd-1: 2022-05-20T02:16:40.008Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: NEW:: HTLC LOCAL 14 = SENT_ADD_HTLC/RCVD_ADD_HTLC
lightningd-1: 2022-05-20T02:16:40.010Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: Adding HTLC 14 amount=10000000msat cltv=113 gave CHANNEL_ERR_ADD_OK
lightningd-1: 2022-05-20T02:16:40.012Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: peer_out WIRE_UPDATE_ADD_HTLC
lightningd-1: 2022-05-20T02:16:40.015Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: REPLY WIRE_CHANNELD_OFFER_HTLC_REPLY with 0 fds
lightningd-1: 2022-05-20T02:16:40.026Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: peer_out WIRE_WARNING
lightningd-1: 2022-05-20T02:16:40.029Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: billboard perm: Too much dust to update fee (Desired feerate update 20000)
lightningd-1: 2022-05-20T02:16:40.035Z INFO 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-chan#1: Peer transient failure in CHANNELD_NORMAL: channeld WARNING: Too much dust to update fee (Desired feerate update 20000)
lightningd-1: 2022-05-20T02:16:40.039Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-lightningd: Will try reconnect in 60 seconds
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Over time, it has cost us more developer cycles than it has gained.
It has hidden intermittant bugs, and allowed cruft to accumulate:
when we eventually tried to figure out what was going wrong, the
actual change which caused it was now stale and forgotten.
This was a particular bane during the connectd rewrite, and I
worked through some issues which had occurred before, but were not
more likely.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This changes many fields: in non-deprecated mode, they're now raw integers.
This was always the intention, but the transition was never completed.
Suggested-By: @ShahanaFarooqui
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: "_msat" fields can be raw numbers, not "123msat" strings (please handle both!)
Changelog-Deprecated: JSON-RPC: "_msat" fields as "123msat" strings (will be only numbers)
We should be using amount_msat always. Many tests were not. Plus,
deprecating it simplifies the code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSONRPC: `sendpay` `route` elements `msatoshi` (use `amount_msat`)
The name in the spec is `msat`, but I don't want to make an API exception.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `fetchinvoice` `changes` `amount_msat`
Changelog-Deprecated: JSON-RPC: `fetchinvoice` `changes` `msat` (use `amount_msat`)
This is consistent with our output changes, and increases consistency.
It also keeps future sanity checks happy, that we only use JSON msat
helpers with '_msat' fields.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `invoice`, `sendonion`, `sendpay`, `pay`, `keysend`, `fetchinvoice`, `sendinvoice`: `msatoshi` argument is now called `amount_msat` to match other fields.
Changelog-Deprecated: JSON-RPC: `invoice`, `sendonion`, `sendpay`, `pay`, `keysend`, `fetchinvoice`, `sendinvoice` `msatoshi` (use `amount_msat`)
We had json_add_amount_msat_only(), which was designed to be used to
print out msat fields, if we had sats.
However, we misused it, so split it into the three different cases:
1. json_add_amount_sat_msat: We are using it correctly, with a field called
xxx_msat.
2. json_add_amount_sats_deprecated: We were using it wrong, so deprecate
the old field and create a new one which does end in _msat.
3. json_add_sats: we were using it to hand sats as a JSON parameter to an
interface, where "XXXsat".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `rbf_channel` and `openchannel2` hooks `their_funding` (use `their_funding_msat`)
Changelog-Deprecated: Plugins: `openchannel2` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `funding_satoshis` (use `funding_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `channel_reserve_satoshis` (use `channel_reserve_msat`)
Changelog-Deprecated: Plugins: `channel_opened` notification `amount` (use `funding_msat`)
Changelog-Deprecated: JSON-RPC: `listtransactions` `msat` (use `amount_msat`)
Changelog-Deprecated: Plugins: `htlc_accepted` `forward_amount` (use `forward_msat`)
We were setting it on the root, but that doesn't get handed to
sendpay. Our schema doesn't *require* bolt11, either, so this was
missed (there could be a *bolt12* instead).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: JSON-RPC: `listpays` always includes `bolt11` or `bolt12` field.
This is what LND does, and it's better for upper layers than trying to
twist our maxfeepercent / exemptfee heuristics to suit.
(I don't remember who complained about this, sorry!)
I'm doing this now because I want to add YA parameter next!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `pay` has new parameter `maxfee` for setting absolute fee (instead of using `maxfeepercent` and/or `exemptfee`)
I think the new pay command has proven itself in the last 18 months!
Also various pay tests took "compat" then didn't use it, so clean them
up.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: JSON-RPC: `legacypay` (`pay` replaced it in 0.9.0).
Trips on our RPC checking introduced at the same time: msat should be
an integer or an "xxxmsat"/sat/btc string.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Suggested-by: @t-bast
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listforwards` has new entry `style`, currently "legacy" or "tlv".
Partial revert of 43a833e405
"lightningd: remove support for legacy onion format."; we restore the
ability to decode legacy onions for forwarding, but not to generate them.
(We don't accept them properly since making payment_secret compulsory
anyway, so no real change there!)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: Protocol: ... but we still forward legacy HTLC onions for now.
Using a canned sendonion call from an old version (v0.10.2), where I
forced it to use legacy onion for l2.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the part which works: we have another old PR (or simply
uncomment the FIXME section) for the routehint case.
Closes: #4781
See-also: #4808
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I removed these prematurely: we *haven't* had a release since
introducing them!
This consists of reverting d15d629b8b
"plugins/fetchinvoice: remove obsolete string-based API." and
plugins/fetchinvoice: remove obsolete string-based
API. "onion_messages: remove obs2 support."
Some minor changes due to updated fromwire_tlv API since they
were removed, but not much.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: REVERT: Removed backwards compat with onion messages from v0.10.1.
Suggested by @m-schmook, I realized that if we append it later I'll
never get it right: I expect parameters min and max, not max and min!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: you can now alter the `htlc_minimum_msat` and `htlc_maximum_msat` your node advertizes.
We still use the channel hint here (as it's the only option), we just
warn about lack of capacity.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to add some, since our internal representations of
htlc_maximum_msat round up, and we need to disable mpp which succeeds
in getting a payment through by splitting.
We also allow dev_routes to suppress invoice routehints altogether.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
niftynei
Rusty Russell
Michael Schmoock