Our pay code handles this correctly, but decode was still using an old model
where there was a payinfo per hop, not per path.
Reported-by: @t-bast
See: #5823
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I know this is an unforgivably large diff, but the spec has changed so
much that most of this amounts to a rewrite.
Some points:
* We no longer have "offer_id" fields, we generate that locally, as all
offer fields are mirrored into invoice_request and then invoice.
* Because of that mirroring, field names all have explicit offer/invreq/invoice
prefixes.
* The `refund_for` fields have been removed from spec: will re-add locally later.
* quantity_min was removed, max == 0 now mean "must specify a quantity".
* I have put recurrence fields back in locally.
This brings us to 655df03d8729c0918bdacac99eb13fdb0ee93345 ("BOLT 12:
add explicit invoice_node_id.")
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's just to a direct peer, and we only create one, but this is
enough to test, and make payments to non-public nodes work.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We had a scheme where lightningd itself would put a per-node secret in
the blinded path, then we'd tell the caller when it was used. Then it
simply checks the alias to determine if the correct path was used.
But this doesn't work when we start to offer multiple blinded paths.
So go for a far simpler scheme, where the secret is generated (and
stored) by the caller, and hand it back to them.
We keep the split "with secret" or "without secret" API, since I'm
sure callers who don't care about the secret won't check that it
doesn't exist! And without that, someone can use a blinded path for a
different message and get a response which may reveal the node.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Mainly, field name changes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: Protocol: Support for forwarding blinded payments (as per latest draft)
We need to print out first_node_id, and "node_id" is now called
"blinded_node_id" in the spec.
And the schema didn't include the payment fields in the blinded path
for invoices (which broke as soon as we actually tested one!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's 2b7ad577d7a790b302bd1aa044b22c809c76e49d, which reverts the
point32 changes.
It also restores send_invoice in `invoice`, which we had removed
from spec and put into the recurrence patch.
I originally had implemented compatibility, but other changes
which followed this are far too widespread.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: offers: complete rework of spec from other teams (yay!) breaks previous compatibility (boo!)
If rune contains invalid UTF-8, offers (which implements decode) would
produce JSON with invalid UTF-8, which causes lightningd to complain
and kill it, and then die because it's an important plugin.
So don't decode invalid UTF-8!
Reported-by: @jb55
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a bit weird since it lives in the offers plugin, but it works
well. This should make runes much more approachable for people!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have them split over common/param.c, common/json.c,
common/json_helpers.c, common/json_tok.c and common/json_stream.c.
Change that to:
* common/json_parse (all the json_to_xxx routines)
* common/json_parse_simple (simplest the json parsing routines, for cli too)
* common/json_stream (all the json_add_xxx routines)
* common/json_param (all the param and param_xxx routines)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I removed these prematurely: we *haven't* had a release since
introducing them!
This consists of reverting d15d629b8b
"plugins/fetchinvoice: remove obsolete string-based API." and
plugins/fetchinvoice: remove obsolete string-based
API. "onion_messages: remove obs2 support."
Some minor changes due to updated fromwire_tlv API since they
were removed, but not much.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: REVERT: Removed backwards compat with onion messages from v0.10.1.
No more "towire_offer", but "towire_tlv_offer".
This means we double-up on the unfortunately-named `tlv_payload` inside
the onion, but we should rename that in the spec when we remove
old payloads.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, this changes the name of a field in invoice_request:
`payer_signature` becomes simply `signature`. So we allow both for
now, and send the old one unless deprecated_apis is disabled.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And turn "" includes into full-path (which makes it easier to put
config.h first, and finds some cases check-includes.sh missed
previously).
config.h sets _GNU_SOURCE which really needs to be done before any
'#includes': we mainly got away with it with glibc, but other platforms
like Alpine may have stricter requirements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As of 2b923a0367c5f9154fcec706e3302cc4658dd889.
Recurrence quotes need to be marked separately, since they're no longer
in offers main bolt.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's very similar to the previous, but there are a few changes:
1. The enctlv fields are numbered differently.
2. The message itself is a different number.
The onionmsg_path type is the same, however, so we keep that constant
at least.
The result is a lot of cut & paste, but we will delete the old one
next release.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is from 6e99c5feaf60cb797507d181fe583224309318e9
We renamed the enctlv field to encrypted_recipient_data in the spec, and the
new onion_message is message 513. We don't handle it until the next patch.
Two renames:
1. blinding_seed -> blinding_point.
2. enctlv -> encrypted_recipient_data.
We don't do a compat cycle for our JSON APIs for these experimental
features only used by our own plugins, we just rename.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Temporarily disable sendpay_blinding test which uses obsolete onionmsg;
there's still some debate on the PR about how blinded HTLCs will work.
Changelog-EXPERIMENTAL: onionmessage: removed support for v0.10.1 onion messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
sendonionmessage can fail when sending a reply, either because
the reply had a bad first peer, or because it went offline. The
latter happens in CI, which is how I found this.
Also fixed typo "onio" -> "onion".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We keep the now-removed chains field, and in deprecated mode, we set it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: bolt12: `chains` in invoice_request and invoice is deprecated, `chain` is used instead.
Main changes are:
1. Uses point32 instead of pubkey32.
2. Uses issuer instead of vendor.
3. Uses byte instead of u8.
4. blinded_path num_hops is now a byte, not u16 (we don't use that yet!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: bolt12: `vendor` is deprecated: the field is now called `issuer`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Experimental: Protocol: Updated onion_message support to match updated draft specification (with backwards compat for old version)
sendonionmessage is going to be the new one, and do much *less*.
As this is an internal experimental-only API, no deprecation cycle
required.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before:
Ten builds, laptop -j5, no ccache:
```
real 0m36.686000-38.956000(38.608+/-0.65)s
user 2m32.864000-42.253000(40.7545+/-2.7)s
sys 0m16.618000-18.316000(17.8531+/-0.48)s
```
Ten builds, laptop -j5, ccache (warm):
```
real 0m8.212000-8.577000(8.39989+/-0.13)s
user 0m12.731000-13.212000(12.9751+/-0.17)s
sys 0m3.697000-3.902000(3.83722+/-0.064)s
```
After:
Ten builds, laptop -j5, no ccache: 8% faster
```
real 0m33.802000-35.773000(35.468+/-0.54)s
user 2m19.073000-27.754000(26.2542+/-2.3)s
sys 0m15.784000-17.173000(16.7165+/-0.37)s
```
Ten builds, laptop -j5, ccache (warm): 1% faster
```
real 0m8.200000-8.485000(8.30138+/-0.097)s
user 0m12.485000-13.100000(12.7344+/-0.19)s
sys 0m3.702000-3.889000(3.78787+/-0.056)s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It subsumes `decodepay`, and it's nicer if people can just assume it's
available at all times.
Changelog-Added: JSON-RPC: `decode` now available without `experimental-offers`
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
@shesek points out that we called this field created_at in bolt11 decode,
which makes more sense anyway.
Changelog-EXPERIMENTAL: bolt12 decode `timestamp` field deprecated in favor of new name `created_at`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
ZmnSCPxj jxPCSnmZ