0.16.0 is required since we rely on it for some tests and the block
reduction allows us to waste less time during setup. 121 blocks were
chosen so that we have at least one mature output to spend.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
If bitcoind is still fetching blocks, we might accidentally inject
the failure between getblockhash and getblock. That's OK, but
it's not the failure we test for.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Looks like rebasing the flake8 branch caused breakage, as new violations
had occurred since that check was written
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This test generates a pre-bip173 testnet P2PKH address with bitcoin 0.15.1
which fails under the new verification checks for the bip173 network name.
This should be renabled with bitcoin 0.16 which can generate a bip173 address
for regtest with the bcrt prefix.
* Modifies invoice command to have the following format
invoice <msatoshi> <label> <desc> <?expiry> <?fallbackaddr>
* Adds support for Segwit bcrt1 addresses for withdraw
* Add test case for fallback address in invoice creation
* Create a common json_tok_address_scriptpubkey to be used
by invoice and withdraw commands.
We can do similar tricks to test other things, even to run without a
real bitcoind for faster testing, but for now we simply exit if a magic
file says so.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The billboard is now far more useful to tell what's going on, and this
gets us closer to a state == owner mapping.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We also fold opening_got_hsm_funding_sig() into the caller; it was
previously a callback before we decided to always use the HSM
synchronously.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Each peer can have one 'uncommitted' channel, which is in the process
of opening. This is used for openingd, and then on return we convert
it into a full-fledged struct channel and commit it into the database.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* Fix dev_setfees to set slow and normal fees correctly.
Due to a bug def_setfees(100, slow=100) would instead set immediate and
normal fees to 100. This behavior has been updated to set fees to
correct values, make the values truly optional as per documentation and
unit test this behavior.
* Fix pay() to set msatoshi, description and risk factor properly
Due to a bug pay(invoice, description='1000') resulted in payment of
1000 msatoshi instead. This was fixed and covered with tests.
* Fix named args in listpayments, listpeers and connect
* Do not pass None to methods where it is default value
* Make description on invoice and pay match.
Suggested-by: @ZmnSCPxj
* Fix dev_setfees to set slow and normal fees correctly.
Due to a bug def_setfees(100, slow=100) would instead set immediate and
normal fees to 100. This behavior has been updated to set fees to
correct values, make the values truly optional as per documentation and
unit test this behavior.
* Fix pay() to set msatoshi, description and risk factor properly
Due to a bug pay(invoice, description='1000') resulted in payment of
1000 msatoshi instead. This was fixed and covered with tests.
* Fix named args in listpayments, listpeers and connect
* Do not pass None to methods where it is default value
* Make description on invoice and pay match.
Suggested-by: @ZmnSCPxj
We now keep a list of commands for the jcon instead of a simple
'current' pointer: the assertions become a bit more complex, but
the rest is fairly mechanical.
Fixes: #1007
Reported-by: @ZmnSCPxj
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to set expiry, otherwise waitinvoice would take 1 hr, and we
can't read once for every cmd, since each read may consume more than
a single result, and we block.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Once we read a command, we are supposed to io_wait until it finishes.
However, we are actually woken in two places: when it's complete
(which is correct), and when it's written out (which is wrong).
We don't care when it's written out, only when it's finished:
refactor to make json_done() free and NULL the old ->current,
rather than have the callers do it. Now it's clear that it's
ready for both new output and new input.
Fixes: #934
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And return the correct error message for the channel they give, if
they try to re-establish on an error channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Much like the database; peer contains id, address, channel contains
per-channel information. Where we create a channel, we always create
the peer too.
For the moment, peer->log and channel->log coexist side-by-side, to
reduce some of the churn.
Note that this changes the API to dev-forget-channel: if we have more
than one channel, we insist they specify the short-channel-id.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We get intermittant failure: WIRE_UNKNOWN_NEXT_PEER (First peer not ready)
because CHANNELD_NORMAL and actually telling gossipd that the channel
is available are distinct things: we need both.
(For test_closing_different_fees, we were testing CHANNELD_NORMAL on
the peer, not on l1, too).
But we may also directly send the announcement sigs if the height is
sufficient, so the simplest is to unify the messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
```
> assert [c['active'] for c in l2.rpc.listchannels()['channels']] == [True, True]
E AssertionError: assert [True, False] == [True, True]
E At index 1 diff: False != True
E Full diff:
E - [True, False]
E + [True, True]
```
We don't actually wait that l2's gossipd has also processed the message.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Sometimes the super-low-fee commitment tx succeeds, and we see
that 'sendrawtx exit 0' instead of the one we're expecting.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
fundrawtransaction returns before the actual sendrawtx, so we can
end up mining blocks before it's sent, thus not having enough confirms.
We handle this correctly in fund_channel, but this test open-codes it
for speed with multiple peers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It was taking over 10 minutes under valgrind, causing Travis to time it out.
This shrinks it to its essential tests, and also batches.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
With the new 'human-readable' mode of lightning-cli, this actually produces
a valid config file. It's a bit hacky though...
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, decode error messages correctly and do the right thing with
messages about other channels.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We are now too quick in disabling the channel for us to attempt a
payment. We need to separate into getroute and sendpay to trigger this
now.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This was flaky because we didn't wait for the fee update to complete
and were using the old, way too small, fees, which upset bitcoind.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
delinvoice was orginally documented to only allow deletion of unpaid
invoices, but there might be reasons to delete paid ones or unexpired ones.
But we have to avoid the race where someone pays as it's deleted: the
easiest way is to have the caller tell us the status, and fail if
it's wrong.
Fixes: #477
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're going to have to support multiple channels per peer, even if only
when some are onchain. This would break the current listpeers, so
change it to an array (single element for now).
Other cleanups:
1. Only set connected true if daemon is not onchaind.
2. Only show netaddr if connected; don't make it an array, call it `address`
in comparison with `addresses` in listnodes.
3. Rename `channel` to `short_channel_id`
4. Add `funding_txid` field for voyeurism.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Individual tests can always re-enable them, though.
[ More test fallout fixes by Christian Decker ]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Seems to avoid the nasty python resource warnings, as well as the
fatal 'ValueError: PyMemoryView_FromBuffer(): info->buf must not be NULL'
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This, of course, should never be used. But it helps maintain connections
for the moment while we dig deeper into feerates.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For now this just tests that we are sending out keepalive
channel_updates for all local channels.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Since most callers use positional arguments, we should allow a 'null'
literal where we require no value at all.
Also adds some more value tests.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Paid invoices need to know how much was actually paid: both for the case
where no 'msatoshi' amount was specified, and for the normal case, where
clients are permitted to overpay in order to help them disguise their
payments.
While we migrate the db, we leave this field as 0 for old paid
invoices. This is unhelpful for accounting, but at least clearly
indicates what happened if we find this in the wild.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
'rhash' is the old terminology, but 'payment_preimage' and
'payment_hash' were decided on for the BOLTs, so we should fix that here.
We still use rhash internally, but that's much easier to fix.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
> assert [c['active'] for c in l2.rpc.getchannels()['channels']] == [True, True]
E AssertionError: assert [False, True] == [True, True]
E At index 0 diff: False != True
E Full diff:
E - [False, True]
E + [True, True]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to make sure all the updates are known to gossip. Since
one is the local update, we change that message to look the same.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Receiving them in channeld is not enough to avoid the race:
route = l1.rpc.getroute(l3.info['id'], 4999999, 1)["route"]
...
ValueError: RPC call failed: Could not find a route
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We wait the the receipt of the CHANNEL_UPDATE message by channeld,
but that doesn't mean it reached gossipd yet, causing spurious test
failure.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
CI always runs with TEST_DEBUG=1 which prints logs anyway, and testing
locally should also be done this way, combined with pytest which
captures the logs. No need to duplicate the functionality of pytest.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Since we seem to have some isolation concerns when re-generating the
same HSM secret and re-parsing the blockchain some blocks in the past.
This also alleviates the problem of printing to a logging stream that
has been closed. Previously bitcoind would keep running despite a test
had failed and continue logging to the, now closed, StringIO that
py.test uses when capturing stdout.
The performance impact seems to be 1-3 second per test, not too bad
IMHO for increased test isolation and cleaner logs:
|--------------------+---------------+----------|
| | No_valgrind | Valgrind |
|--------------------+---------------+----------|
| bitcoind per suite | 10 min 24 sec | 46:15.31 |
| bitcoind per test | 11 min 38 sec | 49:21.64 |
|--------------------+---------------+----------|
Signed-off-by: Christian Decker <decker.christian@gmail.com>
I was examining a test_onchain_timeout failure, and realized that we
were forgetting a peer even though we'd just spent the HTLC_TIMEOUT_TX!
This reveals that we weren't resolving an output when we stole the preimage
from it, like we should.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we panic when we see our root reorg out, even if we're not doing
anything yet, restoring the 100 block margin is the simplest fix.
Unfortunately this means adding a 100-block spacer in the tests, so things
don't get confused.
Fixes: #511
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We stopped too early; we should continue and make sure it all goes well.
This means we have to fix them to be deterministic: by generating 2
blocks at once in test_htlc_in_timeout, we raced between fulfill and
timeout on the HTLC. Now it's always fulfilled.
Also, fixed confusing comments: l1 doesn't drop to chain.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
OUR_HTLC_TIMEOUT_TO_US = normal tx, used to timeout htlc in their commit tx.
OUR_HTLC_TIMEOUT_TX = dual-sig tx with delay, used to timeout htlc in our commit tx.
Only one test looks at that string, so fix that too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The test_reconnect_normal test is failing rather consistently on 32bit
architectures, disabling to reduce noise. Issue #468 tracks progress.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
With python-bitcoinlib==0.9.0 it appears that the URL based auth
information is no longer used, so we fall back to reading the config
file for the bitcoind daemon instead.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Relatively simple: until we reach funding-depth the channels should be
known locally, so we can already route through them, but they should
not be announced to peers to which the connection is non-local.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
If send_htlc_out() fails, it doesn't initialize pc->out; that can
make us think it's still in progress.
Reported-by: Jonas Nick
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
All peers come from gossipd, and maintain an fd to talk to it. Sometimes
we hand the peer back, but to avoid a race, we always recreated it.
The race was that a daemon closed the gossip_fd, which made gossipd
forget the peer, then master handed the peer back to gossipd. We stop
the race by never closing the gossipfd, but hand it back to gossipd
for closing.
Now gossipd has to accept two fds, but the handling of peers is far
clearer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We should not disconnect from a peer just because it fails opening; we
should return it to gossipd, and give a meaningful error.
Closes: #401
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't use it yet, but now we'll decode correctly.
See: https://github.com/lightningnetwork/lightning-rfc/pull/317
lightning-rfc commit: ef053c09431442697ab46e83f9d3f86e3510a18e
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If you run locally, it fails occasionally; presumably because it
sees previous funds. Use a random HSM key for that teste.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I noticed some breakage with git master:
1. getinfo no longer supported (for us, use getblockchaininfo)
2. generate no longer supported (use generatetoaddress)
Both these options are supported at least in 0.15, too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This seems to happen when we manage to check between the
channel_announcement and the channel_update being processed.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Add two simple tests: one for a single direct payment and one with
hundreds of parallel payments, reusing the same route.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We are announcing that we are willing to accept incoming payments with
current_height + min_final_cltv_expiry + slack, assuming that the
sender adds some slack. In particular we'd reject the payment if
slack=0 which is allowed by the spec.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Raising the exception about non-zero exit values into the
teardown. This was previously masking the valgrind errors. Now
valgrind errors > crash errors > non-zero return value.
Still hoping to catch that elusive [7, 0] return value on travis.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
These need to be different for testing the example in BOLT 11.
We also use the cltv_final instead of deadline_blocks in the final hop:
various tests assumed 5 was OK, so we tweak utils.py.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I run with ulimit -c unlimited, and valgrind leaves core files like
valgrind-errors.22114.core.22114 which test_lightning.py tries to
parse as log files.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It crashes under valgrind, causing a valgrind error: valgrind gives us a
backtrace anyway, so we don't need it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Christian Decker
ZmnSCPxj, ZmnSCPxj jxPCSmnZ
Rusty Russell
practicalswift
John Barboza
Anton Astafiev
William Casarin
alaniz
cornwarecjp
gdassori
windsok
Igor Cota