Now the internal code will generate a "PLUGIN_TERMINATED" response
when the plugin dies, we can handle it in plugin_hook.
But we can also simplify it by turning the snapshot of hooks into
a simple array: this means we are robust against any combination of plugins
exiting at any time.
Note: this reveals an issue with test_rpc_command_hook where we run
the request hook again (unexpectedly), so we disable that for the next
patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We had special code to fail a forwarded request, but not for an
internally-generated request. Instead, we should pretend the (dead)
plugin responded with a PLUGIN_TERMINATED error, and handle the
request through the normal paths.
This breaks the case where a plugin crashes (or stops itself) in a
hook, so we handle that next.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It was always a bit weird they weren't, and it seems a premature
optimization to make the callbacks to this themselves.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's per-plugin, so why is there a single map for all plugins? It
works because we always make unique ids, but it's weird.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When using DEBUG_SUBD with pytest:
```
lightningd: Unknown decode for --dev-debugger=<subprocess>
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
During the changeset calculation after the `openchannel2_sign`
hook.
So this commit patch the problem with the following change:
- Addressed an issue where `psbt_get_changeset` was modifying the original PSBT unnecessarily.
- This modification led to problems with a different hsmd, as referenced in [Issue #6672](https://github.com/ElementsProject/lightning/issues/6672).
- Noted a potential optimization where only a subpart of the PSBT
needs to be cloned, as the mutation is specific to inputs.
Link: https://github.com/ElementsProject/lightning/issues/6672
Reported-by: @devrandom
Suggested-by: Ken Sedgwick <ken@bonsai.com>
Co-Developed-by: Ken Sedgwick <ken@bonsai.com>
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Changelog-Added: Plugins: plugins can now specify (unknown) even messages we should accept from peers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We do it here, but it's not necessary, and we also deprive them of the
chance to do so (since we kill them).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Previously, we would forward the message to a subd, but now we have
the case where the subd is gone, but we're still connected. If the
peer anything but a reestablish in that state, we drop the connection.
Instead, an error should always make us fail the channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We generalize the current df-only "aborted" flag (and invert it) to a
"disconnected" flag in the peer status message.
We convert it back to the aborted flag for now inside subd.c, but that's
next.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Move the "no lease, return" to the top, to avoid testing twice. Also,
we won't spam now for most channels.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As a node matures and is no longer new, it can take some time
to determine which version of `cln` it's running.
To address this, we now display the version earlier. This ensures
that even in the event of a crash, we're aware of the running version.
(cln-meta-project-py3.11) ➜ lightning git:(macros/log-version) ✗ ./lightningd/lightningd
2023-10-12T19:21:00.899Z INFO lightningd: v23.08.1-209-gae94be4-modded
2023-10-12T19:21:00.994Z INFO lightningd: Creating configuration directory /home/vincent/.lightning/bitcoin
2023-10-12T19:21:01.235Z INFO lightningd: Creating database
2023-10-12T19:21:01.279Z UNUSUAL hsmd: HSM: created new hsm_secret file
Could not connect to bitcoind using bitcoin-cli. Is bitcoind running?
Make sure you have bitcoind running and that bitcoin-cli is able to connect to bitcoind.
You can verify that your Bitcoin Core installation is ready for use by running:
$ bitcoin-cli echo 'hello world'
2023-10-12T19:21:01.349Z **BROKEN** plugin-bcli: \nCould not connect to bitcoind using bitcoin-cli. Is bitcoind running?\n\nMake sure you have bitcoind running and that bitcoin-cli is able to connect to bitcoind.\n\nYou can verify that your Bitcoin Core installation is ready for use by running:\n\n $ bitcoin-cli echo 'hello world'\n
2023-10-12T19:21:01.349Z INFO plugin-bcli: Killing plugin: exited before we sent init
The Bitcoin backend died.
Link: https://github.com/ElementsProject/lightning/issues/6374
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
This makes it easier to use outside simple subds, and now lightningd can
simply dump to log rather than returning JSON.
JSON formatting was a lot of work, and we only did it for lightningd, not for
subdaemons. Easier to use the logs in all cases.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We didn't apply the inflight to the channel struct before asserting, so
we can break test_rbf_non_last_mined:
```
lightningd: lightningd/dual_open_control.c:981: dualopend_tell_depth: Assertion `bitcoin_txid_eq(&channel->funding.txid, txid)' failed.
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now we're not always using the same functions to watch during
dual-funding opening, we need to make sure we're watching the close
(in particular, df close before the opening is confirmed).
So, keep a pointer, and if it's not set in drop_to_chain, set it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We used the original channel funding output number. I'm not sure if this
was true in the previous code, or a regression I introduced, but it
caused occasonal failures in test_splice_gossip!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use the *same* callback for the funding tx, as well as for inflight dual-funding txs, as well as inflight splice txs. This is deeply confusing!
Instead, use explicit cbs for splicing and df. Once they're locked in, use the normal callback.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We never do this, but we're about to (we always watch before
we broadcast a tx).
We use a `depth` member to avoid calling the callback multiple times
for the same event, but we initialize it to 0. This means if we
register a watch, and the first thing that happens is that it
reorganizes out, we *don't* make the callback.
Use an impossible value at initialization, instead.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The latter is used when we're put in the db, the former is the uncommitted state.
Currently dbid == 0 is used in addition to the state, which is unwieldy.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Experimental: JSON-RPC: added new dual-funding state `DUALOPEND_OPEN_COMMITTED`
We usually hand times by copy, not by pointer (and if we did, they should
be const!). I noticed this particularly for the state changed code, but
it goes down to to json_add_timeiso, so I fixed that too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We should use capability tests for states (can you add htlcs?) rather than vague
descriptions (are you closing?).
And as much as possible, use switch () statements to force us to think
about all the cases, especially when we add new states!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently it's half done in funding_depth_cb, and half in
channeld_tell_depth. It's very confusing as a result,
with splicing, dual-funding and zeroconf.
This does introduce a behaviour change: if a channel is NORMAL and
it gets reorganized, we force close (unless we were the one who funded
it, or it's zeroconf anyway). This is safer than continuing to use
the channel in this case!
Some tests are changed to zeroconf to make them work, but v2 doesn't
support zeroconf, so that's removed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a workaround, the real fix is to use a different
callback for inflight splice attempts, which comes later.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Not just if htlc addition is too slow, make this the default. dual-open's txabort
is excluded, however.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If you previously configured with `--enable-developer` we turn that into `--enable-debugbuild`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: build: `--enable-developer` arg to configure (and DEVELOPER variables): use `./configure --enable-debugbuild` and `developer` setting at runtime.
And require --developer to use them.
Also refuse redirection to deprecated APIs if deprecated APIs are disabled!
Changelog-Removed: `dev-sendcustommsg` (use `sendcustommsg`, which was added in v0.10.1)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Also requires us to expose memleak when !DEVELOPER, however we only
ever used the memleak tracking when the LIGHTNINGD_DEV_MEMLEAK
environment variable was set, so keep that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently it just defaults to the DEVELOPER compile option, but we'll
move over to this.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Config: `--developer` enables developer options and changes default to be "disable deprecated APIs".
We check for list_empty, so it's always actually set.
```
lightningd/peer_control.c: In function ‘drop_to_chain’:
lightningd/peer_control.c:353:17: error: ‘tx’ may be used uninitialized [-Werror=maybe-uninitialized]
353 | resolve_close_command(ld, channel, cooperative, tx);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lightningd/peer_control.c:341:36: note: ‘tx’ was declared here
341 | struct bitcoin_tx *tx;
| ^~
cc1: all warnings being treated as errors
make: *** [Makefile:298: lightningd/peer_control.o] Error 1
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Added a test for splicing out that exposed some behavior and code glitches that are addressed in this commit.
Added test for splice gossip.
Also added documentation for how to do a splice out.
ChangeLog-Fixed: Added docs, testing, and some fixes related to splicing out, insufficent balance handling, and restarting during a splice.
json_add_timeabs only printed in milliseconds and json_add_time outputs a string which is weird
Changelog-Changed: JSON-RPC time fields now have full nanosecond precision (i.e. 9 decimals not 3): `listfowards` `received_time` `resolved_time` `listpays`/`listsendpays` `created_at`.
Explicitly allow all-zero in the onion_hash: we didn't do anything except log if it was unexpected anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were allowed to, but the spec removed that. So we handle warnings
differently from errors now.
This also means the LND "internal error" workaround is done in
lightningd (we still disconnect, but we don't want to close channel).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: we no longer disconnect every time we receive a warning message.
This seems to be a cut & paste bug (mine, AFAICT!) from the command code:
```
rune = rune_derive_start(cmd, master_rune,
tal_fmt(tmpctx, "%"PRIu64,
rune_counter ? *rune_counter : 0));
```
In that case, rune_counter was a pointer, which could be NULL.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It always is for runes we create, but in theory you can take our secret key
and make our own runes with your own tools.
(We correctly refuse runes without uniqueids if they're *not* ours
anyway: uniqueid is only used for our own runes).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
nodeid is only useful when we know the peer we're talking to (e.g. commando).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
No-schema-diff-check: We're simply making optional, not deprecating!
During tests we can see that the subdaemon can be restarted unnecessarily if we're slow enough; we don't need to do so if it's still running.
Reported-by: Matt Morehouse <mattmorehouse@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We determine whether they are allowed or not based on the hook return
value of `mindepth`. To do so we need to pass that value down to
`openingd` and verify that the `channel_type` and our permissions
match up.
1. announce-addr-discovered-port takes a port option.
2. accept-htlc-tlv-types was deprecated in favor of multiple accept-htlc-tlv-type.
3. Document clnrest.py options.
4. Don't list --version twice in lightningd --help (initial_config_opts calls
opt_register_version() already).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reported-by: @niftynei
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Plugins: we clean up properly if a plugin fails to start, and we don't kill all processes if it's from `plugin startdir`.
Don’t send the funding spend to onchaind if we detect it in inflights (aka. a splice). While we already prevented onchaind_funding_spent from being called directly, the call to wallet_channeltxs_add meant onchaind_funding_spent would be called *anyway* on restart. This is now fixed.
Additionally there was a potential for a race problem depending on the firing order of the channel depth and and funding spent events.
Instead of requiring these events fire in a specific order, we make a special “memory only” inflight object to prevent the race regardless of firing order.
Changelog-Fixed: Splice: bugfix for restart related race condition interacting with adversarial close detection.
Indeed, we can fall through this if it's not a valid enum value.
gcc-12 (Ubuntu 12.2.0-17ubuntu1) 12.2.0
```
In file included from plugins/commando.c:10:
ccan/ccan/tal/str/str.h: In function ‘rune_altern_to_english’:
ccan/ccan/tal/str/str.h:43:9: error: ‘cond_str’ may be used uninitialized [-Werror=maybe-uninitialized]
43 | tal_fmt_(ctx, TAL_LABEL(char, "[]"), __VA_ARGS__)
| ^~~~~~~~
plugins/commando.c:97:21: note: ‘cond_str’ was declared here
97 | const char *cond_str;
| ^~~~~~~~
cc1: all warnings being treated as errors
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In spec commit 498f104fd399488c77f449d05cb21c0b604636a2 (August 2021),
Bastien Teinturier removed the requirement that the mutual close fee be
less than or equal the final commitment tx.
We adopted that change in v0.10.2, but we made sure to never offer a fee
under the final commitment tx's fee, so we didn't break older nodes.
However, the closing tx can actually be larger than the final commitment tx!
The final commit tx has a 22-byte P2WKH output and a 34-byte P2WSH output;
the closing can have two 34-byte outputs, making it 4*8 = 32 Sipa heavier.
Previously this would only happen if both sides asked for P2WSH outputs,
but now it happens with P2TR, which we now do.
The result is that we create a tx which is below the finally commitment
tx fee, and may be below minrelayfee (as it was in regtest).
So it's time to remove that backwards-compatibility hack.
Changelog-Fixed: Protocol: We may propose mutual close transaction which has a slightly higher fee than the final commitment tx (depending on the outputs, e.g. two taproot outputs).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #6545
Avoids a gratuitous "ctx" field, and the simplified declaration
is now understood by `make update-mocks`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was recommended by @t-bast: if the final spec commits to something
compatible, we can simply advertize and accept both features, but if it
does change in incompatible ways we won't cause problems for nodes
who implement the official spec.
(I split this, so first, we remove the OPT_SPLICE entirely, to make
sure we caught them all. --RR)
Suggested-by: @t-bast
Changelog-None
The nomenclature confusion mean that we were ANDING a capability
with a message number (29) which always returned non-zero. We really
do need a new capability which we can hand to channeld to make these
splice txs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I obviously like the word "capabilities" since I reused it to refer
to the HSM's overall features :(
Suggested-by: @ksedgwic
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Apparently MacOS doesn't always have fdatasync, so use fsync. Even more importantly
check whether it succeeds!
Fixes: #6516
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I noticed this while debugging an issue with ACINQ, that we got upset,
but didn't trigger a reconnect cycle.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Protocol: We now close connection with a peer if adding an HTLC times out (which may be a TCP connectivity issue).
In this case, the user's default was info, but they specifically asked for debug
from one plugin. Since there were no per-file filters, it set filtering to the
default level, info, and rejected it. Since it's been explicitly filtered in,
we need to pass it at this point.
Reported-by: @wtogami
Fixes: #6503
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was strongly recommended by Russell O'Connor: the "ms" implies that
it's a BIP-32 master secret, and this is CLN specific.
If we changed the hrp to "cln" it would be better, but apparently that
means we no longer fit in a "standard billfold metal wallet" (and
our code assumes a 2-byte prefix anyway).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Thread the signed tx through so close's JSON return contains that,
rather than the unsigned channel->last_tx.
We have to split the "get cmd_id" from "resolve the close commands" though;
and of course, as before, we don't actually print the txids of multiple
transactions even though we may have multi in flight due to splice!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: JSON-RPC: `close` returns a `tx` field with witness data populated (i.e. signed).
Fixes: #6440
Update the lightningd <-> channeld interface with lots of new commands to needed to facilitate spicing.
Implement the channeld splicing protocol leveraging the interactivetx protocol.
Implement lightningd’s channel_control to support channeld in its splicing efforts.
Changelog-Added: Added the features to enable splicing & resizing of active channels.
Update gossip routiens and various other hecks on the channel state to consider AWAITING_SPLICE to be routable and treated similar to CHANNELD_NORMAL.
Small updates to psbt interface
Changelog-None
Firstly, I wanted the results easier to use:
1. Make them always lower case, even if the string was UPPER.
2. Decode the payload for them.
3. Don't give the user any fields they don't need, and make
the field sizes explicit.
Secondly, I wanted to avoid the pattern of "check in one place, assume
in another", in favour of "check on use".
So, I changed the code to lower the string if it needs to at the start,
and then changed the pull functions so we always use them to get data:
this way we should fail clearly and gracefully if we don't have enough data.
I made all the checks explicit, where we assign the fields.
I also addressed the FIXME: I think the array is *often* one shorter,
but not always, so I trim the last byte at the end if needed.
[ Aditya modified the tests to work ]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Clean restart of daemon after a tx-abort is a nice way to work around
the 'persistent' disconnect that we t-bast noticed.
Changelog-Fixed: `dualopend`: Fix behavior for tx-aborts. No longer hangs, appropriately continues re-init of RBF requests without reconnction msg exchange.
This will at least *help* the case where these were not populated, causing us
to send errors without channel_updated appended.
It's not perfect: we can still send such errors if the gossip store is
corrupted, and we still send them for private channels, but it should
help.
(The much better fix is far more invasive, so slips to next release!)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This cause of cascading failure was pointed out by @t-bast: if fees spike and
you don't timeout an outgoing onchain HTLC, you should nonetheless fail the incoming htlc
because otherwise the incoming peer will close on you.
Of course, there's a risk of losing funds, but this only happens if you weren't going to get the HTLC spend in time anyway. And it would also catch any other reason that the downstream onchain goes wrong, containing the damage.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reported-by: @t-bast
Changelog-Fixed: Protocol: We will close incoming HTLCs early if the outgoing HTLC is stuck onchain long enough, to avoid cascating failure.
This is the simplest solution, not the best, but there's significant risk in try to remove the "we have a path" assumption in the code pay code.
Includes removing a `tal_steal` which was incorrect: the buffer has the same lifetime as the plugin, so if we steal it then things get messy when we free the struct payment.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: `pay` will now pay your own invoices if you try.
Previously, the "payment" and "invoice" paths were completely separate, but this now calls both. It bypasses htlc_sets (and thus, cannot do MPP), and bypasses the hook too: the former is tied closely to HTLCs, and the hook is also very htlc-centric.
Includes finishing unfinished sentence in sendpay man page, as a bonus.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: `sendpay` now allows self-payment of invoices, by specifying an empty route.
Clean these up: they were debug logs, but we want to pass this information
back for self-payments.
Also fixes "Attept" typo which altered tests!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If they have invalid runes, we bail, but if they have runes which used
a different master secret (old commando.py allowed you to override
secret), we just complain and delete them.
Note that this requires more mocks in wallet/test/run-db.c...
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The wallet_datastore_first() SELECT statement only iterates from the
given key (if any), relying on the caller to notice when the key no
longer applies. (e.g. startkey = ["foo", "bar"] will return key
["foo", "bar"] then ["foo", "bar", "child" ], then ["foo", "baz"]).
The only caller (listdatastore) would notice the keychange and stop
looping, but reallly wallet_datastore_next() should do this. When I
tried to use it for migrations, I got very confused!
Also, several places want a simple "wallet_datastore_get()" function,
so provide that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We want to access this in db migrations, which happen very early, but
runes_init needs the db, creating a circular dependency which must be
split.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The uid isn't enough: it could be someone else's rune. This is tested
in the command rune list tests.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
At cold start, if your node is behind the blocktip and you've sent your
peer a blockheight counter from the future, we shouldn't confuse ourselves
with our rollback/replay.
Should fix flakes in CI that were spotting BROKEN blockheight updates.
Logs below from a previuos CI fail (edited for relative clarity)
The one that sasy "{ SENT_ADD_ACK_REVOCATION:111 }, our current 108` is
the tell; the last line is the node finally catching up to the tip.
In the test we get into this state by stopping and restarting the node.
```
2023-07-22T11:24:28.2754533Z lightningd-1 2023-07-22T11:19:34.188Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-chan#2: Already have funding locked in
2023-07-22T11:24:28.2755486Z lightningd-1 2023-07-22T11:19:34.188Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-chan#2: attempting update blockheight a5b23dff5177badd6df725c
efeb83ceccbfc52dc64a16b38894a41f0ad8fa181
2023-07-22T11:24:28.2755778Z lightningd-1 2023-07-22T11:19:34.188Z DEBUG lightningd: update_blockheight: height = 108
2023-07-22T11:24:28.2766210Z lightningd-1 2023-07-22T11:19:34.210Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#2: init LOCAL: remote_per_commit = 029563e7c898
5d8b95bdfe19e47e494bb8ec8d53ff4edb93f156be57667bfee8c9, old_remote_per_commit = 02bf3117c149d324361f0b418db8984b1e29af70c773eb2865a41ff7f583c7c9ed next_idx_local = 3 next_idx_remote = 3 revocations_recei
ved = 2 feerates { SENT_ADD_ACK_REVOCATION:3750 } range 253-150000 blockheights { SENT_ADD_ACK_REVOCATION:111 }, our current 108
2023-07-22T11:24:28.2768866Z lightningd-1 2023-07-22T11:19:34.211Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#2: peer_out WIRE_CHANNEL_REESTABLISH
2023-07-22T11:24:28.2769416Z lightningd-1 2023-07-22T11:19:34.211Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#2: billboard: Sent reestablish, waiting for the
irs
2023-07-22T11:24:28.2771115Z lightningd-1 2023-07-22T11:19:34.212Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#2: peer_in WIRE_CHANNEL_REESTABLISH
2023-07-22T11:24:28.2774150Z lightningd-1 2023-07-22T11:19:34.212Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#2: Got reestablish commit=3 revoke=2
2023-07-22T11:24:28.2776056Z lightningd-1 2023-07-22T11:19:34.212Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#2: next_revocation_number = 2
2023-07-22T11:24:28.2805639Z lightningd-1 2023-07-22T11:19:34.239Z **BROKEN** 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#2: current blockheight 108 less than last 111
2023-07-22T11:24:28.2823960Z lightningd-1 2023-07-22T11:19:34.240Z DEBUG lightningd: Adding block 109: 5f67b6e110eb3c3457bea4fcf0d04ce9be90efeee5df8e083ed4266074ca911f
2023-07-22T11:24:28.2833154Z lightningd-1 2023-07-22T11:19:34.251Z **BROKEN** 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#2: current blockheight 108 less than last 111
2023-07-22T11:24:28.2833630Z lightningd-1 2023-07-22T11:19:34.252Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#2: Trying commit
2023-07-22T11:24:28.2834165Z lightningd-1 2023-07-22T11:19:34.252Z **BROKEN** 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#2: current blockheight 108 less than last 111
2023-07-22T11:24:28.2835070Z lightningd-1 2023-07-22T11:19:34.252Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#2: Can't send commit: nothing to send, feechange not wanted ({ SENT_ADD_ACK_REVOCATION:3750 }) blockheight not wanted ({ SENT_ADD_ACK_REVOCATION:111 })
2023-07-22T11:24:28.2835516Z lightningd-1 2023-07-22T11:19:34.350Z DEBUG lightningd: Adding block 110: 5f43f3ac9d808e3a309720d1b0727a00d5a3d3ddca71d97401e233637e87639c
2023-07-22T11:24:28.2835962Z lightningd-1 2023-07-22T11:19:34.476Z DEBUG lightningd: Adding block 111: 55b0d1e0a08ff6233e186e6735cb1cbec33e2b0a6e7d08f2622e8c1db30b54b9
```
We get intermittant reports of subd->conn being leaked, but I could never find it.
That's because it's actually subd which is not referenced any more: subd->conn
gets reported because it's subd's tal_parent (and, except for the reference in
subd, not referenced either).
The real issue is that the channel->owner is reassigned to the new subdaemon,
and the old one is still exiting. During that time, we can see a "leak".
```
- Node /tmp/ltests-hkr089bp/test_sql_1/lightning-3/ has memory leaks: [
{
"backtrace": [
"ccan/ccan/tal/tal.c:477 (tal_alloc_)",
"ccan/ccan/io/io.c:91 (io_new_conn_)",
"lightningd/subd.c:774 (new_subd)",
"lightningd/subd.c:828 (new_channel_subd_)",
"lightningd/dual_open_control.c:3662 (peer_restart_dualopend)",
"lightningd/peer_control.c:1161 (connect_activate_subd)",
"lightningd/peer_control.c:1273 (peer_connected_hook_final)",
"lightningd/plugin_hook.c:213 (plugin_hook_callback)",
"lightningd/plugin.c:591 (plugin_response_handle)",
"lightningd/plugin.c:702 (plugin_read_json_one)",
"lightningd/plugin.c:747 (plugin_read_json)",
"ccan/ccan/io/io.c:59 (next_plan)",
"ccan/ccan/io/io.c:407 (do_plan)",
"ccan/ccan/io/io.c:417 (io_ready)",
"ccan/ccan/io/poll.c:453 (io_loop)",
"lightningd/io_loop_with_timers.c:22 (io_loop_with_timers)",
"lightningd/lightningd.c:1249 (main)"
],
"label": "ccan/ccan/io/io.c:91:struct io_conn",
"parents": [
"lightningd/lightningd.c:107:struct lightningd"
],
"value": "0x556c63c859f8"
}
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The channel selection did not consider the amounts that we are trying
to transfer, which in a multiplexed channel world could end up always
selecting a channel that is too small for the payment. We also log
which channel was selected based on the selector that is passed in,
allowing us to better follow the decisions.
Changelog-Fixed: pay: `sendonion` and `sendpay` will now consider amounts involved when using picking one channel for a peer
If you miss a wait event, you can catch up by doing listinvoices and
getting the max of these fields. It's also a good debugging clue.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now we have defined ordering, we can add a start param.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listinvoices` has `index` and `start` parameters for listing control.
This will initially be for listinvoices, but can be expanded to other
list commands.
It's documented, but it makes promises which currently don't exist:
* listinvoice does not support `index` or `start` yet.
* It doesn't actually fire when invoices change yet.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `wait`: new generic command to wait for events.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `setchannel` adds a new `ignorefeelimits` parameter to allow peer to set arbitrary commitment transaction fees on a per-channel basis.
This extracts the core checking functionality for a rune, so they can
easily be used more widely than just commando.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Without this, only per-peer daemons were filtered correctly. For generic
daemons, we need to filter with the actual nodeid they use (if any).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: config: `log-level` filters now apply correctly to messages from `connectd`.
Rather than initializating the "print_level" field on first use, we can
do it in logging_options_parsed(), now we have a linked list of them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
`struct log` becomes `struct logger`, and the member which points to the
`struct log_book` becomes `->log_book` not `->lr`.
Also, we don't need to keep the log_book in struct plugin, since it has
access to ld's log_book.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We can expose the dbid, rather than pretending we have some "struct
invoice" which is actually just the dbid. And don't have a pile of
"wallet_" wrappers for redirection.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We hand "estimatefees.feerate_floor" as method, for example, and then
crash instead of reporting the plugin which gave us the bad answer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Previously, our code checked for the presence of the `lightning:`
prefix while decoding a bolt11 string. Although this prefix is valid
and accepted by the core lightning pay command, it was causing issues
with how we managed invoices. Specifically, we were skipping the prefix
when creating a copy of the invoice string and storing the raw invoice
(including the prefix) in the database, which caused inconsistencies
in the user experience.
To address this issue, we need to strip the `lightning:` prefix before
calling each core lightning command. In addition, we should
modify the invstring inside the db with the canonical one.
This commit fixes the issue by stripping the `lightning:` prefix
from the `listsendpays` function, which will improve the
user experience and ensure consistency in our invoice management (see
next commit).
Reported-by: @johngribbin
Link: ElementsProject#6207
Fixes: debbdc0
Changelog-Fixes: trim the `lightning:` prefix from invoice everywhere.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
We fixed the others. There are no fields, but this keeps it consistent.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `shutdown` notification contains `shutdown` object (notification consistency)
Requested-by: Shahana Farooqui @Shahana
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: plugins can subscribe to all notifications using "*".
This is just housekeeping that allows up
to do not spam the logs of people with not
useful information.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
`deprecated_apis` is now inside `ld`.
```
lightningd/notification.c: In function ‘connect_notification_serialize’:
lightningd/notification.c:60:13: error: ‘deprecated_apis’ undeclared (first use in this function)
60 | if (deprecated_apis)
| ^~~~~~~~~~~~~~~
lightningd/notification.c:60:13: note: each undeclared identifier is reported only once for each function it appears in
lightningd/notification.c: In function ‘disconnect_notification_serialize’:
lightningd/notification.c:97:13: error: ‘deprecated_apis’ undeclared (first use in this function)
97 | if (deprecated_apis)
| ^~~~~~~~~~~~~~~
lightningd/notification.c: In function ‘block_added_notification_serialize’:
lightningd/notification.c:612:13: error: ‘deprecated_apis’ undeclared (first use in this function)
612 | if (deprecated_apis) {
| ^~~~~~~~~~~~~~~
make: *** [Makefile:299: lightningd/notification.o] Error 1
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
ignore the min fee as specified by the user setting.
We explicitly allow the user to ignore the fee limits, although this comes with inherent risks.
By enabling this option, users are explicitly
I was aware of the potential dangers.
There are situations, such as the one described in [1], where it
becomes necessary to bypass the fee limits to resolve issues like a stuck channel.
BTW experimental-anchors should fix this.
[1] https://github.com/ElementsProject/lightning/issues/6362
Reported-by: @pabpas
Fixes: 64b1ddd761
Link: https://github.com/ElementsProject/lightning/issues/6362
Changelog-Fixes: do not ignore the ignore-fee-limit option during
update_fee
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Changelog-Added: JSON-RPC: `connect` and `disconnect` notifications now wrap `id` field in a `connect`/`disconnect` object (consistency with other notifications)
We usually have access to `ld`, so avoid the global.
The only place generic code needs it is for the json command struct,
and that already has accessors: add one for libplugin and lightningd
to tell it if deprecated apis are OK.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the simple version which always tries to keep some sats if we
have an anchor channel. Turns out that we need something more
sophisticated for multifundchannel, so that's next.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `withdraw` will refuse to spend funds below `min-emergency-msat` if we have any anchor channels (and `all` will be reduced appropriately).
Changelog-Changed: JSON-RPC: `fundpsbt` and `utxopsbt` will refuse to spend funds below `min-emergency-msat` if we have any anchor channels.
For anchors, we need some sats sitting around in case we need to CPFP
a close.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Config: `min-emergency-msat` setting for (currently experimental!) anchor channels, to keep funds in reserve for forced closes.
We disabled experimental support for opening non-zero-fee anchor
channels (though old nodes may still have such channels if they turned
that on!).
So we simply call this `experimental-anchors`, since this is the variant
which we expect to be used widely.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: protocol: added support for zero-fee-htlc anchors (`option_anchors_zero_fee_htlc_tx`), using `--experimental-anchors`.
In most cases, it's the same as option_anchor_outputs, but for
fees it's different. This transformation is the simplest:
pass it as a pair, and test it explicitly.
In future we could rationalize some paths, but this was nice
and mechanical.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to know both, because in theory we could negotiate a
non-anchor channel even if they support it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to know both, because in theory we could negotiate a
non-anchor channel even if they support it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we can CPFP, we don't have to track the feerate as closely. But
it still needs to get in the mempool, so we use 10 sat/byte, or the
100 block estimate if that is higher.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `feerates` has new fields `unilateral_anchor_close` to show the feerate used for anchor channels (currently experimental), and `unilateral_close_nonanchor_satoshis`.
Changelog-Changed: JSON-RPC: `feerates` `unilateral_close_satoshis` now assumes anchor channels if enabled (currently experimental).
We don't actually use it anywhere, but we actually want to now for
CPFP. So give it more parameters and make it return bool so it can
be set without necessarily suppressing rexmit.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It depends on whether we negotiated anchors: just document that this
field doesn't apply for anchors (it becomes zero by the end of this
patch series, which is weird).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means we need to push off requring this for another full deprecation cycle!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: JSON-RPC: `pay` and `decodepay` with description now correctly handle JSON escapes (e.g " inside description)
If it's a plugin opt, we'll need a callback, so reshuffle logic. Also
add infra to map option name to plugin and option.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Do it slightly intelligently, so if we had set previously using setconfig
we don't keep appending new ones, but replace it in-place.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently only implemented for min-capacity-sat.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: new command `setconfig` allows a limited number of configuration settings to be changed without restart.
Previously, if these failed we always exited; once we have dymamic
configs this would be a (tiny) memory leak, so use tmpctx.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
To test, we do min-capacity-sat which is simple. We also update the
listconfigs man page which contained some obsolete information.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were seeing hangs in disconnect in
tests/test_connection.py::test_feerate_stress, and looking at the logs
it's because we're not actually telling connectd to disconnect.
These days, we have a connect counter, so connectd knows to ignore it
if we simply haven't read the message about it already disconnecting.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When core lightning is asking the information about
the blockchain with `getchaininfo` command lightningd
know already the information about the min and max block height.
the problem is when we have a smarter Bitcoin backend that is able
to switch between different clients in some cases is helpful
give the information about current known height by lightningd and
pass it down to the plugin.
In this way, the plugin knows what is the correct known height from lightnind, and can
try to fix some problems if any exit.
This is particularly useful when you are syncing a new backend from scratch
like https://github.com/cloudhead/nakamoto and we avoid returning the
lower height from the known, and avoid the crash of core lightning.
With this information, the plugin can start to sync the chain and return
the answer back only when the chain is in sync with the current status of
lightningd.
Another reason to add this field and not wait the correct block in core
lightning itself is because Bitcoin Core is extremely slow to sync up,
so the question here is, how long should we wait? The time depends
on various factors.
With this approach of informing the plugin about the height, in some cases,
you can start the syncing but move the execution to another backend until
the previous one is ready.
The problem I want to solve is that I don't want to be left in the dark when
we run `getchaininfo`, and I want to have the opportunity to wait for
the blockchain sync or decide to dispatch the request elsewhere.
Changelog-Added: Pass the current known block height down to the getchaininfo call.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
option_scid_alias inside a channel_type allows for more private
channels: in particular, it tells the peer that it MUST NOT allow
routing via the real short channel id, and MUST use the alias.
It only makes sense (and is only permitted!) on unannounced channels.
Unfortunately, we didn't set this bit in the channel_type in v12.0
when it was introduced, instead relying on the presence of the feature
bit with the peer. This was fixed in 23.05, but:
1. Prior to 23.05 we didn't allow it to be set at all, and
2. LND has a limited set of features they allow, and this isn't allowed without
option_anchors_zero_fee_htlc_tx.
We could simply drop this channel_type until we merge anchors, *but*
that has nasty privacy implications (you can probe the real channel id).
So, if we don't negotiate anchors (we don't!), we don't set this
channel_type bit even if we want it, and *intuit* it, based on:
1. Is this a non-anchor channel_type?
2. Did we both send channel_type?
3. Is this an unannounced channel?
4. Did both peers announce support for scid aliases?
In addition, while looking at the previous backwards-compat code, I
realized that v23.05 violated the spec and send accept_channel with
OPT_SCID_ALIAS if it intuited it, even if it wasn't offered. Stop
doing this, but allow our peers to.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Fix incompatibility with LND which prevented us opening private channels
Fixes: #6208
defaults were deprecated in 0df97547dd, but that was a bit
harsh as several plugins do that (summary, for example). So allow false, but warn
that we ignore anything else.
Reported-by: @microsatoshi on Discord.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: ...actually, `default` `false` still accepted on `flag` type parameters.
Memory leak detected by ASan:
==880002==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 32816 byte(s) in 1 object(s) allocated from:
#0 0x5039e7 in malloc (lightningd/lightningd+0x5039e7)
#1 0x7f2e8c203884 in __alloc_dir (/lib64/libc.so.6+0xd2884)
Rusty Russell
Vincenzo Palazzo
Tony Aldon
ShahanaFarooqui
Matt Whitlock
Dusty Daemon
Christian Decker
Lisa Neigut
adi2011
Greg Sanders
Matt Morehouse