It makes it impossible to embed an ipaddr in another structure, since we
always try to skip over any zeroes, which may swallow a following field.
Do the skip specially for the case where we're parsing routing messages:
we never use padding for our own internal messages anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Makes it easier to compare before/after failures. Ideally, we should
run under Travis both with this option and with the seed based on the
entire tmp path (which is still reproducible with determination, but
not fixed every run like this is).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There are now only two kinds of subdaemons: global ones (hsmd, gossipd) and
per-peer ones. We can handle many callbacks internally now.
We can have a handler to set a new peer owner, and automatically do
the cleanup of the old one if necessary, since we now know which ones
are per-peer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We currently rely on a zero exit status. That's the only difference between
onchain finished handling and other per-peer daemons, so instead we should
have an explicit "done" message. This is both clearer, and allows us to
unify.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now the flow is much simpler from a lightningd POV:
1. If we want to connect to a peer, just send gossipd `gossipctl_reach_peer`.
2. Every new peer, gossipd hands up to lightningd, with global/local features
and the peer fd and a gossip fd using `gossip_peer_connected`
3. If lightningd doesn't want it, it just hands the peerfd and global/local
features back to gossipd using `gossipctl_handle_peer`
4. If a peer sends a non-gossip msg (eg `open_channel`) the gossipd sends
it up using `gossip_peer_nongossip`.
5. If lightningd wants to fund a channel, it simply calls `release_channel`.
Notes:
* There's no more "unique_id": we use the peer id.
* For the moment, we don't ask gossipd when we're told to list peers, so
connected peers without a channel don't appear in the JSON getpeers API.
* We add a `gossipctl_peer_addrhint` for the moment, so you can connect to
a specific ip/port, but using other sources is a TODO.
* We now (correctly) only give up on reaching a peer after we exchange init
messages, which changes the test_disconnect case.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're going to make the ip/port optional, so they should go at the end.
In addition, using ip:port is nicer, for gethostbyaddr().
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have to do a dance when we get a reconnect in openingd, because we
don't normally expect to free both owner and peer. It's a layering
violation: freeing a peer should clean up the owner's pointer to it,
to avoid a double free, and we can eliminate this dance.
The free order is now different, and the test_reconnect_openingd was
overprecise.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This fixes the only case where the master currently has to write directly
to the peer: re-sending an error. We make gossipd do it, by adding
a new gossipctl_fail_peer message.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, the main daemon needs to pass it about (marshal/unmarshal)
but it won't need to actually use it after the next patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We pull them from the database on-demand, where we're storing them
anyway. No need to keep them in memory as well.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
No idea why we were iterating over the list of stubs and then passing
in the index instead of a pointer to the stub directly.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This wires in the loading of `struct htlc_stub`s on-demand when
starting `onchaind` so that we don't need to keep them in memory.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
So far we were tracking the status by including it either in the paid
or the unpaid list. This refactor makes the state explicit, which
matches the planned DB schema much better.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
While loading HTLCs from the database we might not yet have all the
incoming HTLCs loaded when loading a dependent htlc_out. So we defer
the wiring of the HTLCs until we are sure we have them loaded.
This is also the first step towards keeping that association only in
the database, since otherwise we cannot selectively load channels from
DB.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Especially when testing we might want to disable the automatic
reconnection logic in order not to masquerade bugs that disappear when
reconnecting.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Seems to go out to lunch on reorgs:
+136792.168286138 lightningd(9465):BROKEN: bitcoin-cli getchaintips exited 28: 'error code: -28
error message:
Rewinding blocks...
Closes: #286
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't hit this in testing, since we wait for startup already. Hacking
tests to avoid that, I tested this code by hand.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Using pc after free in the pay_command_destroyed destructor, so
we just steal cmd onto pc so free order is the one we want.
[ Edit: expanded comment, split commit ]
Signed-off-by: Christian Decker <decker.christian@gmail.com>
So far only happens during normal shutdown, but it may happen in other
cases as well. We simply define a new destructor that unregisters the
`cmd` from the `jcon`.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
These were fun to hunt down. The jcon and the conn are allocated off
of ld, so the free order is unspecified and if conn is freed before
conn then the finish_jcon destructor uses conn after free.
[ Edit: split commit, modified to use a destructor directly on jcon,
which is more robust than relying on it only being freed via conn --RR ]
Signed-off-by: Christian Decker <decker.christian@gmail.com>
peer_fail_permanent() frees peer->owner, but for bad_peer() we're
being called by the sd->badpeercb(), which then goes on to
io_close(conn) which is a child of sd.
We need to detach the two for this case, so neither tries to free the
other.
This leads to a corner case when the subd exits after the peer is gone:
subd->peer is NULL, so we have to handle that too.
Fixes: #282
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have a race where we start onchaind, but state is unchanged, so checks
like peer_control.c's:
peer_ready = (peer->owner && peer->state == CHANNELD_AWAITING_LOCKIN);
if (!peer_ready) {
log_unusual(peer->log,
"Funding tx confirmed, but peer state %s %s",
peer_state_name(peer->state),
peer->owner ? peer->owner->name : "unowned");
} else {
subd_send_msg(peer->owner,
take(towire_channel_funding_locked(peer,
peer->scid)));
}
Can send to the wrong daemon.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were sending a channeld message to onchaind, which was v. confusing
due to overlap. We make all the numbers distinct, which means we can
also add an assert() that it's valid for that daemon, which catches
such errors immediately.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We re-use the value for reasonable_depth given by the master, and we
tell it when our timeout transactions reach that depth.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When we see an offered HTLC onchain, we need to use the preimage if we
know it. So we dump all the known HTLC preimages at startup, and send
new ones as we discover them.
This doesn't cover preimages we know because we're the final
recipient; that can happen if an HTLC hasn't been irrevocably
committed yet. We'll do that in a followup patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If the HSM is slow it might happen that the timestamp has changed the
second time we come around, so we generate the timestamp externally
and pass it in so we're sure it won't change between calls.
Reported-by: Rusty Russell
Signed-off-by: Christian Decker <decker.christian@gmail.com>
lightningd can crash on shutdown if it's in the middle of getchaintips;
we free the conn, the finished callback is called (process_chaintips),
and it reports that it received an empty result.
The simplest fix is to set a flag in the struct bitcoind destructor,
and avoid the callback.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Either when it exits with a signal, or sends an error status message.
Then we make test_lightningd.py use it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This change is really to allow us to have a --dev-fail-on-subdaemon-fail option
so we can handle failures from subdaemons generically.
It also neatens handling so we can have an explicit callback for "peer
did something wrong" (which matters if we want to close the channel in
that case).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Remove reference to old $(LIGHTNINGD_OLD_LIB_OBJS) var (in handshaked too).
2. Make check depend directly on unit tests, insteadof weird lightningd/tests
variable.
3. check-source-bolt and check-whitespace are automatic for $(ALL_TEST_PROGRAMS)
so we don't need them here.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the step where we broadcast the transaction to the network and
a nice place to extract the change from the transaction.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
It's no longer used and we definitely do not want to run with an
outdated or future db, so we'll terminate if we can't upgrade or
the version is newer than what we understand.
Signed-off-by: Christian Decker <decker.christian@gmai.com>
So far we were always using the deadline in the announcements, that's
obviously not good, so this introduces the parameter as per spec.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We weren't killing it. Eventually it would die, and peer_owner_finished()
would access subd->peer->owner, but that peer was freed already.
Closes: #261
Reported-by: Christian Decker <decker.christian@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
To reproduce the next bug, I had to ensure that one node keeps thinking it's
disconnected, then the other node reconnects, then the first node realizes
it's disconnected.
This code does that, adding a '0' dev-disconnect modifier. That means
we fork off a process which (due to pipebuf) will accept a little
data, but when the dev_disconnect file is truncated (a hacky, but
effective, signalling mechanism) will exit, as if the socket finally
realized it's not connected any more.
The python tests hang waiting for the daemon to terminate if you leave
the blackhole around; to give a clue as to what's happening in this
case I moved the log dump to before killing the daemon.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In this case, we unset the old subd->peer, then freed subd.
peer_owner_finished dereferenced subd->peer->owner, and boom:
test_disconnect_funder (__main__.LightningDTests) ... Fatal signal 11. Log dumped in crash.log
------------------------------- Valgrind errors --------------------------------
Valgrind error file: valgrind-errors.2882
==2882== Invalid read of size 8
==2882== at 0x413F74: peer_owner_finished (peer_control.c:679)
==2882== by 0x41EA2C: destroy_subd (subd.c:381)
==2882== by 0x459700: notify (tal.c:240)
==2882== by 0x459BB1: del_tree (tal.c:400)
==2882== by 0x459FC0: tal_free (tal.c:509)
==2882== by 0x413796: peer_reconnected (peer_control.c:493)
==2882== by 0x413A6A: add_peer (peer_control.c:592)
==2882== by 0x40ED1F: handshake_succeeded (new_connection.c:186)
==2882== by 0x41E3DD: sd_msg_reply (subd.c:262)
==2882== by 0x41E6BB: sd_msg_read (subd.c:318)
==2882== by 0x41E4E6: read_fds (subd.c:283)
==2882== by 0x44DEB4: next_plan (io.c:59)
==2882== Address 0x838 is not stack'd, malloc'd or (recently) free'd
==2882==
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The logic of dispatching the announcement_signatures message was
distributed over several places and daemons. This aims to simplify it
by moving it all into `channeld`, making peer_control only report
announcement depth to `channeld`, which then takes care of the
rest. We also do not reuse the funding_locked tx watcher since it is
easier to just fire off a new watcher with the specific purpose of
waiting for the announcement_depth.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
1. The code to skip over padding didn't take into account max.
2. It also didn't use symbolic names.
3. We are not supposed to fail on unknown addresses, just stop parsing.
4. We don't use the read_ip/write_ip code, so get rid of it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Use a negative timestamp as the flag for this, making the test simple.
This allows valgrind to detect that we're accessing them prematurely,
including across the wire on gossip_getchannels_entry.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
jl777 reported a crash when we try to pay past reserve. Fix that (and
a whole class of related bugs) and add tests.
In test_lightning.py I had to make non-async path for sendpay() non-threaded
to get the exception passed through for testing.
Closes: #236
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
You will want to 'make distclean' after this.
I also removed libsecp; we use the one in in libwally anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Some fields were redundant, some are simply moved into 'struct lightningd'.
All routines updated to hand 'struct lightningd *ld' now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Christian Decker