connectd is going to end up using this do demux; make it fast and complete.
Fixing this reveals a problem in openingd: it now extracts the channel_id
from funding_signed (which is where we transition off the temporary), and
gets upset. So fix that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And turn "" includes into full-path (which makes it easier to put
config.h first, and finds some cases check-includes.sh missed
previously).
config.h sets _GNU_SOURCE which really needs to be done before any
'#includes': we mainly got away with it with glibc, but other platforms
like Alpine may have stricter requirements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before:
Ten builds, laptop -j5, no ccache:
```
real 0m36.686000-38.956000(38.608+/-0.65)s
user 2m32.864000-42.253000(40.7545+/-2.7)s
sys 0m16.618000-18.316000(17.8531+/-0.48)s
```
Ten builds, laptop -j5, ccache (warm):
```
real 0m8.212000-8.577000(8.39989+/-0.13)s
user 0m12.731000-13.212000(12.9751+/-0.17)s
sys 0m3.697000-3.902000(3.83722+/-0.064)s
```
After:
Ten builds, laptop -j5, no ccache: 8% faster
```
real 0m33.802000-35.773000(35.468+/-0.54)s
user 2m19.073000-27.754000(26.2542+/-2.3)s
sys 0m15.784000-17.173000(16.7165+/-0.37)s
```
Ten builds, laptop -j5, ccache (warm): 1% faster
```
real 0m8.200000-8.485000(8.30138+/-0.097)s
user 0m12.485000-13.100000(12.7344+/-0.19)s
sys 0m3.702000-3.889000(3.78787+/-0.056)s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We make it a first-class citizen internally, even though we won't use
it over the wire (at least, non-experimental builds). This scheme
follows the latest draft, in which features are flagged compulsory.
We also add several helper functions.
Since uses the *even* bits (as per latest spec), not the *odd* bits,
we have some other fixups.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It also gets rid of the requirement that close negotiation fee maximum
is the old commitment transaction. We still do that, however, to
avoid surprising old peers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I wasn't regenerating these when I changed dependencies, because I was
configured with --enable-experimental-features. Putting them in
ALL_C_HEADERS and ALL_C_SOURCES means they'll be regenerated, even
though nothing depends on them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Avoids much cut & paste. Some tests don't need any of it, but most
want at least some of this infrastructure.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This avoids overwriting the ones in git, and generally makes things neater.
We have convenience headers wire/peer_wire.h and wire/onion_wire.h to
avoid most #ifdefs: simply include those.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We create ALL_PROGRAMS, ALL_TEST_PROGRAMS, ALL_C_SOURCES and
ALL_C_HEADERS. Then the toplevel Makefile knows which are
autogenerated (by wildcard), so it can have all the rules to clean
them or check the source as necessary.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The main change here is that the previously-optional open/accept
fields and reestablish fields are now compulsory (everyone was
including them anyway). In fact, the open/accept is a TLV
because it was actually the same format.
For more details, see lightning-rfc/f068dd0d8dfa5ae75feedd99f269e23be4777381
Changelog-Removed: protocol: support for optioned form of reestablish messages now compulsory.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When we have only a single member in a TLV (e.g. an optional u64),
wrapping it in a struct is awkward. This changes it to directly
access those fields.
This is not only more elegant (60 fewer lines), it would also be
more cache friendly. That's right: cache hot singles!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
GCC 10 defaults to `-fno-common`. no longer automatically sharing
global variable definitions, which makes it important to define
them in only one place (otherwise there will be duplicate definition
errors). Add `extern` qualifiers where (I think) is the best place for
them.
Currently the only source for amount_asset is the value getter on a tx output,
and we don't hand it too far around (mainly ignoring it if it isn't the
chain's main currency). Eventually we could bubble them up to the wallet, use
them to select outputs or actually support assets in the channels.
Since we don't hand them around too widely I thought it was ok for them to be
pass-by-value rather than having to allocate them and pass them around by
reference. They're just 41 bytes currently so the overhead should be ok.
Signed-off-by: Christian Decker <@cdecker>
Turns out the peer part of the spec no longer uses padding (it's used only
in the onion), and GCC-9 with -O3 warns we're padding NULL to memcpy.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Don't turn them to/from pubkeys implicitly. This means nodeids in the store
don't get converted, but bitcoin keys still do.
MCP results from 5 runs, min-max(mean +/- stddev):
store_load_msec:33934-35251(34531.4+/-5e+02)
vsz_kb:2637488
store_rewrite_sec:34.720000-35.130000(34.94+/-0.14)
listnodes_sec:1.020000-1.290000(1.146+/-0.086)
listchannels_sec:51.110000-58.240000(54.826+/-2.5)
routing_sec:30.000000-33.320000(30.726+/-1.3)
peer_write_all_sec:50.370000-52.970000(51.646+/-1.1)
MCP notable changes from previous patch (>1 stddev):
-store_load_msec:46184-47474(46673.4+/-4.5e+02)
+store_load_msec:33934-35251(34531.4+/-5e+02)
-vsz_kb:2638880
+vsz_kb:2637488
-store_rewrite_sec:46.750000-48.280000(47.512+/-0.51)
+store_rewrite_sec:34.720000-35.130000(34.94+/-0.14)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Pubkeys are not not actually DER encoding, but Pieter Wuille corrected
me: it's SEC 1 documented encoding.
Results from 5 runs, min-max(mean +/- stddev):
store_load_msec,vsz_kb,store_rewrite_sec,listnodes_sec,listchannels_sec,routing_sec,peer_write_all_sec
38922-39297(39180.6+/-1.3e+02),2880728,41.040000-41.160000(41.106+/-0.05),2.270000-2.530000(2.338+/-0.097),44.570000-53.980000(49.696+/-3),32.840000-33.080000(32.95+/-0.095),43.060000-44.950000(43.696+/-0.72)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Basically we tell it that every field ending in '_msat' is a struct
amount_msat, and 'satoshis' is an amount_sat. The exceptions are
channel_update's fee_base_msat which is a u32, and
final_incorrect_htlc_amount's incoming_htlc_amt which is also a
'struct amount_msat'.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
They're generally used pass-by-copy (unusual for C structs, but
convenient they're basically u64) and all possibly problematic
operations return WARN_UNUSED_RESULT bool to make you handle the
over/underflow cases.
The new #include in json.h means we bolt11.c sees the amount.h definition
of MSAT_PER_BTC, so delete its local version.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Michael Schmoock
Rusty Russell
niftynei
Wladimir J. van der Laan
Christian Decker
darosior