connect_control.c, dev_ping.c, gossip_control.c, invoice.c.
This converts about 50% of all calls of `json_get_params` to `param`.
After trying (and failing) to squash and rebase #1682 I just made a new branch
from a patch file and closed#1682.
Signed-off-by: Mark Beckwith <wythe@intrig.com>
- fixes problem with polling interval > 150 * 0.9
- fixes log message 'feerate hit floor' at every feerate change
- smoothed fee now reaches 90% of (exp weighted) fee estimates polled in last
120s, independent of polling interval
- only apply smoothing when effect > 10 percent so it doesn't correct forever
- fix indentation
structeq() is too dangerous: if a structure has padding, it can fail
silently.
The new ccan/structeq instead provides a macro to define foo_eq(),
which does the right thing in case of padding (which none of our
structures currently have anyway).
Upgrade ccan, and use it everywhere. Except run-peer-wire.c, which
is only testing code and can use raw memcmp(): valgrind will tell us
if padding exists.
Interestingly, we still declared short_channel_id_eq, even though
we didn't define it any more!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
`getinfo` has been providing the blockheight for a good while and doesn't
require the `DEVELOPER=1` flag during compilation, so it should be the preferred
method to retrieve the blockchain height.
Implements an EWMA for the fee estimation. Achieves 90% influence of the newer
fee after 5 minutes, and adjusts to the polling rate that is configured.
Until now, `command_fail()` reported an error code of -1 for all uses.
This PR adds an `int code` parameter to `command_fail()`, requiring the
caller to explicitly include the error code.
This is part of #1464.
The majority of the calls are used during parameter validation and
their error code is now JSONRPC2_INVALID_PARAMS.
The rest of the calls report an error code of LIGHTNINGD, which I defined to
-1 in `jsonrpc_errors.h`. The intention here is that as we improve our error
reporting, all occurenaces of LIGHTNINGD will go away and we can eventually
remove it.
I also converted calls to `command_fail_detailed()` that took a `NULL` `data`
parameter to use the new `command_fail()`.
The only difference from an end user perspecive is that bad input errors that
used to be -1 will now be -32602 (JSONRPC2_INVALID_PARAMS).
Make --override-fee-rates a dev option. We use default-fee-rate in
its place, which (since bitcoind won't give fee estimates in regtest
mode for short chains) gives an effective feerate of 15000/7500/3750.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We never hit the guess_feerate() path, because we turned a 0 ("can't
estimate fee") into 253.
This also revealed that we weren't initializing topo->feerate, and
that we were giving spurious updates even if we were using override-fee-rates.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're getting spurious closures, even on mainnet. Using --ignore-fee-limits
is dangerous; it's slightly less so to lower the minimum (which is the
usual cause of problems).
So let's halve it, but beware the floor.
This is a workaround, until we get independent feerates in the spec.
Fixes: #613
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Simplification of the offset calculation to use the rescan parameter, and rename
of `wallet_first_blocknum`. We now use either relative rescan from our last
known location, or absolute if a negative rescan was given. It's all handled in
a single location (except the case in which the blockcount is below our
precomputed offset), so this should reduce surprises.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
The only use for these was to compute their txids so we could notify depth
in case of reorgs.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We are slowly hollowing out the in-memory blockchain representation to make
restarts easier.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This will later allow us to determine the transaction confirmation count, and
recover transactions for rebroadcasts.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
There are two very hard problems in software engineering:
1. Off-by-one errors
In this case we were rolling back further than needed and we were starting the
catchup one block further than expected.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
But only if we're actually going to change the feerate, otherwise we'd
log every time.
Suggested-by: @ZmnSCPxj
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Naively, this would be 250 satoshi per sipa, but it's not since bitcoind's
fee calculation was not rewritten to deal with weight, but instead bolted
on using vbytes.
The resulting calculations made me cry; I dried my tears on the thorns
of BUILD_ASSERT (I know that makes no sense, but bear with me here as I'm
trying not to swear at my bitcoind colleagues right now).
Fixes: #1194
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We would `block_map_add` inside `add_tip`, but we never
`block_map_del` inside `remove_tip`, which is dangerous as
we actually `tal_free` the block inside `remove_tip`.
Our CI did not reliably trap this problem since block
hashes are random and rerunning the `test_blockchaintrack`
often passed spuriously.
Our testing also reveals a bug: we start lightningd and shut it down
before fully processing the blockchain, so we don't set
last_processed_block. Fix that by setting it immediately once we have
a block: worst case it goes backwards a little.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We do a complicated dance because we don't know the current block
height before setting up the topology.
If we're starting at a particular block, we want to go back 100 blocks
before that to cover any reorgs.
If we're not (fresh startup), we still want to go back 100 blocks
because we don't bother handling a reorg which removes all the blocks
we know.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
With fallback depending on chainparams: this means the first upgrade
will be slow, but after that it'll be fast.
Fixes: #990
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This interacts badly with --daemon (next patch) which then tries to
reap a child it didn't create, which took me a couple of hours to
figure out.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We usually did this, but sometimes they were named after what they did,
rather than what they cleaned up.
There are still a few exceptions:
1. I didn't bother creating destroy_xxx wrappers for htable routines
which already existed.
2. Sometimes destructors really are used for side-effects (eg. to simply
mark that something was freed): these are clearer with boutique names.
3. Generally destructors are static, but they don't need to be: in some
cases we attach a destructor then remove it later, or only attach
to *some* cases. These are best with qualifiers in the destroy_<type>
name.
Suggested-by: @ZmnSCPxj
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We move it into jsonrpc where it belongs, and make it fail the command.
This means it can tell us exactly what was wrong.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I've only seen this under travis, so I can't verify that this fixes it,
but it's certainly a bug which could cause that issue.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we panic when we see our root reorg out, even if we're not doing
anything yet, restoring the 100 block margin is the simplest fix.
Unfortunately this means adding a 100-block spacer in the tests, so things
don't get confused.
Fixes: #511
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Load the first block we're possibly interested in, then load the peers so
we can restore the tx watches, then finally replay to the current tip.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Eventually we want to save blockchain in db to avoid this scan, but
for the moment, we need to reload as far back as we may be interested in.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We used to load the new tip and work backwards until we joined up with
the previous tip. That consumed quite a lot of memory if there were
many blocks.
Instead, just poll on blocknum+1, and grab it once that succeeds. If
prev is different from what we expect (reorg), we free the current tip
and try again.
We could theoretically miss a reorg which is the same length (2 block
reorg with more work due to difficulty adjustment), but even if that
happened we'd catch up on the next block.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It definitely changes when we get a block, but it also changes between
blocks as mempool fills. So put it on its own timer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's just a sha256_double, but importantly when we convert it to a
string (in type_to_string, which is used in logging) we use
bitcoin_blkid_to_hex() so it's reversed as people expect.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's just a sha256_double, but importantly when we convert it to a
string (in type_to_string, which is used in logging) we use
bitcoin_txid_to_hex() so it's reversed as people expect.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have things which we don't keep a pointer to, but aren't leaks.
Some are simply eternal (eg. listening sockets), others cases are
io_conn tied to the lifetime of an fd, and timers which expire.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a primitive mark-and-sweep-style garbage detector. The core is
in common/ for later use by subdaemons, but for now it's just lightningd.
We initialize it before most other allocations.
We walk the tal tree to get all the pointers, then search the `ld`
object for those pointers, recursing down. Some specific helpers are
required for hashtables (which stash bits in the unused pointer bits,
so won't be found).
There's `notleak()` for annotating things that aren't leaks: things
like globals and timers, and other semi-transients.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The filter is being populated while initializing the daemon and by
adding new keys as they are being generated. The filter is then used
in connect_block to identify transactions of interest.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
The wire protocol uses this, in the assumption that we'll never see feerates
in excess of 4294967 satoshi per kiloweight.
So let's use that consistently internally as well.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Depending on what we're doing, we can want different ones. So use
IMMEDIATE (estimatesmartfee 2 CONSERVATIVE), NORMAL (estimatesmartfee
4 ECONOMICAL) and SLOW (estimatesmartfee 100 ECONOMICAL).
If one isn't available, we try making each one half the previous.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means we convert it when retrieving from bitcoind; internally it's
always satoshi-per-1000-weight aka millisatoshi-per-weight.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a subset of a "bitcoind: wrap callbacks in transaction." from
the everything-in-transaction branch, but we need the ld pointer now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a bit messier than I'd like, but we want to clearly remove all
dev code (not just have it uncalled), so we remove fields and functions
altogether rather than stub them out. This means we put #ifdefs in callers
in some places, but at least it's explicit.
We still run tests, but only a subset, and we run with NO_VALGRIND under
Travis to avoid increasing test times too much.
See-also: #176
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't hit this in testing, since we wait for startup already. Hacking
tests to avoid that, I tested this code by hand.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Some fields were redundant, some are simply moved into 'struct lightningd'.
All routines updated to hand 'struct lightningd *ld' now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Also, we split the more sophisticated json_add helpers to avoid pulling in
everything into lightning-cli, and unify the routines to print struct
short_channel_id (it's ':', not '/' too).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Simon Vrouwe
Mark Beckwith
Hiroki Gondo
SimonVrouwe
Rusty Russell
Christian Decker
ZmnSCPxj
practicalswift
alaniz
rvandermeer