This commit is adding the instructions for compiling cln on FreeBSD,
because it looks that we not longer compile with the FreeBSD package
manager, and I have no idea who the mantainer of this package is.
Link: https://github.com/ElementsProject/lightning/issues/6301
Reported-by: @bektar
Changelog-None
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
If we're opening a channel with a peer which support anchors (and
we do), we tell fundpsbt/utxopsbt to enforce the emergency reserve;
this matters, as it doesn't know about the channel yet, and thus
won't (if it's our first anchor channel).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `fundchannel` and `multifundchannel` will refuse to spend funds below `min-emergency-msat` if we have any anchor channels (or are opening one).
This is needed when we know we're *opening* an anchor channel, to
override the "do we already have an anchor channel open?" logic.
Also, document the nonwrapped arg added in v23.02.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `fundpsbt` and `utxopsbt` new parameter `opening_anchor_channel` so lightningd knowns it needs emergency reserve for anchors.
This is the simple version which always tries to keep some sats if we
have an anchor channel. Turns out that we need something more
sophisticated for multifundchannel, so that's next.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `withdraw` will refuse to spend funds below `min-emergency-msat` if we have any anchor channels (and `all` will be reduced appropriately).
Changelog-Changed: JSON-RPC: `fundpsbt` and `utxopsbt` will refuse to spend funds below `min-emergency-msat` if we have any anchor channels.
For anchors, we need some sats sitting around in case we need to CPFP
a close.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Config: `min-emergency-msat` setting for (currently experimental!) anchor channels, to keep funds in reserve for forced closes.
We disabled experimental support for opening non-zero-fee anchor
channels (though old nodes may still have such channels if they turned
that on!).
So we simply call this `experimental-anchors`, since this is the variant
which we expect to be used widely.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: protocol: added support for zero-fee-htlc anchors (`option_anchors_zero_fee_htlc_tx`), using `--experimental-anchors`.
We need to know both, because in theory we could negotiate a
non-anchor channel even if they support it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to know both, because in theory we could negotiate a
non-anchor channel even if they support it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we can CPFP, we don't have to track the feerate as closely. But
it still needs to get in the mempool, so we use 10 sat/byte, or the
100 block estimate if that is higher.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `feerates` has new fields `unilateral_anchor_close` to show the feerate used for anchor channels (currently experimental), and `unilateral_close_nonanchor_satoshis`.
Changelog-Changed: JSON-RPC: `feerates` `unilateral_close_satoshis` now assumes anchor channels if enabled (currently experimental).
It depends on whether we negotiated anchors: just document that this
field doesn't apply for anchors (it becomes zero by the end of this
patch series, which is weird).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Do it slightly intelligently, so if we had set previously using setconfig
we don't keep appending new ones, but replace it in-place.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently only implemented for min-capacity-sat.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: new command `setconfig` allows a limited number of configuration settings to be changed without restart.
To test, we do min-capacity-sat which is simple. We also update the
listconfigs man page which contained some obsolete information.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When core lightning is asking the information about
the blockchain with `getchaininfo` command lightningd
know already the information about the min and max block height.
the problem is when we have a smarter Bitcoin backend that is able
to switch between different clients in some cases is helpful
give the information about current known height by lightningd and
pass it down to the plugin.
In this way, the plugin knows what is the correct known height from lightnind, and can
try to fix some problems if any exit.
This is particularly useful when you are syncing a new backend from scratch
like https://github.com/cloudhead/nakamoto and we avoid returning the
lower height from the known, and avoid the crash of core lightning.
With this information, the plugin can start to sync the chain and return
the answer back only when the chain is in sync with the current status of
lightningd.
Another reason to add this field and not wait the correct block in core
lightning itself is because Bitcoin Core is extremely slow to sync up,
so the question here is, how long should we wait? The time depends
on various factors.
With this approach of informing the plugin about the height, in some cases,
you can start the syncing but move the execution to another backend until
the previous one is ready.
The problem I want to solve is that I don't want to be left in the dark when
we run `getchaininfo`, and I want to have the opportunity to wait for
the blockchain sync or decide to dispatch the request elsewhere.
Changelog-Added: Pass the current known block height down to the getchaininfo call.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
This PR:
- adds all the guides (in markdown format) that is published at https://docs.corelightning.org/docs
- adds a github workflow to sync any future changes made to files inside the guides folder
- does not include API reference (json-rpc commands). Those will be handled in a separate PR since they're used as manpages and will require a different github workflow
Note that the guides do not exactly map to their related files in doc/, since we reorganized the overall documentation structure on readme for better readability and developer experience. For example, doc/FUZZING.md and doc/HACKING.md#Testing are merged into testing.md in the new docs. As on the creation date of this PR, content from each of the legacy documents has been synced with the new docs. Until this PR gets merged, I will continue to push any updates made to the legacy documents into the new docs.
If this looks reasonable, I will add a separate PR to clean up the legacy documents from doc/ (or mark them deprecated) to avoid redundant upkeep and maintenance.
Changelog-None
We now know the base reference, and we've rebased, so we can do a
simple diff. Also, this means we can use a magic commit message
`No-schema-diff-check` to suppress false positives.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSON-RPC: `listconfigs` direct fields, use `configs` sub-object and `set`, `value_bool`, `value_str`, `value_int`, or `value_msat` fields.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use multi-specifiable options elsewhere, this is just another.
Otherwise you can't add, you can only set them all.
Changelog-Added: Config: `accept-htlc-tlv-type` (replaces awkward-to-use `accept-htlc-tlv-types`)
Changelog-Deprecated: Config: `accept-htlc-tlv-types` (use `accept-htlc-tlv-type` multiple times)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `default` no longer accepted on `flag` type parameters (it was silently ignored, so just don't set it).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
listconfigs is convenient, but it doesn't handle multi-options well: it
outputs an object with duplicate fields in this case (e.g. log-file), nor
is it extensible to show more than raw values.
However, listconfigs doesn't do what other list commands do (use a
sub-object "configs") so we can put the new values under that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listconfigs` now has `configs` subobject with more information about each config option.
Developers, rejoice (we already have --testnet, --signet and --mainnet!).
Changelog-Added: Config: `--regtest` option as alias for `--network=regtest`
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This obsoletes the use of --announce-addr-dns which I know Michael
didn't really like either.
Changelog-Deprecated: Config: `announce-addr-dns`; use `--bind-addr=dns:ADDR` for finer control.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a major cleanup to how we parse addresses.
1. parse_wireaddr now supports the "dns:" prefix to support dns records (type 5).
2. We are less reliant on separate_address_and_port() which gets confused by
that colon.
3. We explicitly test every possible address type we can get back from
parsing, and handle them appropriately.
We update the documentation to use the clearer HOSTNAME vs DNS prefixes now
we also have `dns:` as a prefix.
Changelog-Added: Config: `bind` can now take `dns:` prefix to advertize DNS records.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: Build: all experimental features are now runtime-enabled; no more ./configure --enable-experimental-features
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And no longer insist on opt_quiesce.
Changelog-EXPERIMENTAL: Config: `--experimental-upgrade-protocol` enables simple channel upgrades.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Turns out this was accidentally changed for v0.10.1 in
d8e68893f5 where we made fee levels less
aggressive.
Oops. I guess we can fix the docs. And we now have "2blocks" if you
want it really fast!
Closes: #6129
Changelog-Fixed: JSON-RPC: `feerates` document correctly that urgent means 6 blocks (not 2), and give better feerate examples.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
mempool.info gives sat/vB, which is 1000 too low for us!
See-also: #6161 (complains setting feerate to 5 doesn't work)
See-also: #6129
Suggested-by: @lightingorb
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
You still need to actually make a rune when lightningd starts, as
commando (for safety) won't work unless you actually generate a rune
(that it knows of!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: hsmtool: `makerune` command to make a master rune for a node.
I tested this indeed breaks if we don't accept it, then implemented
the code to accept it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: protocol: We now correctly accept the `option_scid_alias` bit in `open_channel` `channel_type`.
Changelog-Deprecated: protocol: Not setting `option_scid_alias` in `option_channel` `channel_type` for unannounced channels.
Changelog-Added: JSON-RPC: `feerates`: added `floor` field for current minimum feerate bitcoind will accept
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: `estimatefees` can return explicit `fee_floor` and `feerates` by block number.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And consolidate descriptions into lightning-feerates().
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `close`, `fundchannel`, `fundpsbt`, `multifundchannel`, `multiwithdraw`, `txprepare`, `upgradewallet`, `withdraw` now allow "minimum" and NN"blocks" as `feerate` (`feerange` for `close`).
Drop try_get_feerate() in favor of explicit feerate_for_deadline() and
smoothed_feerate_for_deadline().
This shows us everywhere we deal with old-style feerates by names.
`delayed_to_us` and `htlc_resolution` will be moving to dynamic fees,
so deprecate those.
Note that "penalty" is still used for generating penalty txs for
watchtowers, and "unilateral_close" still used until we get zero-fee
anchors.
Changelog-Added: JSON-RPC: `feerates` `estimates` array shows fee estimates by blockcount from underlying plugin (usually *bcli*).
Changelog-Changed: JSON-RPC: `close`, `fundchannel`, `fundpsbt`, `multifundchannel`, `multiwithdraw`, `txprepare`, `upgradewallet`, `withdraw` `feerate` (`feerange` for `close`) value *slow* is now 100 block-estimate, not half of 100-block estimate.
Changelog-Deprecated: JSON-RPC: `close`, `fundchannel`, `fundpsbt`, `multifundchannel`, `multiwithdraw`, `txprepare`, `upgradewallet`, `withdraw` `feerate` (`feerange` for `close`) expressed as, "delayed_to_us", "htlc_resolution", "max_acceptable" or "min_acceptable". Use explicit block counts or *slow*/*normal*/*urgent*/*minimum*.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we're messing with feerates, it's good to test this directly upfront.
Also, fix documentation!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Turns out the two bcli replacements I checked (`sauron` and
`trustedcoin`) don't even implement this, and the multiplier makes
more sense in lightningd, especially as we move to bcli just providing
raw feerate estimates.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There are cases (difficult to reproduce with a test) where
a payment will fail one time and succeed later.
As far I understand in this case the groupid field of the payment
is the same, and the only thing that change is the status, so
our logic inside the delpay is ambiguous where it is not
possible to delete a payment as described in https://github.com/ElementsProject/lightning/issues/6114
A sequence of commands that explain the problem is
```
$ lc -k listpays payment_hash=H
{
"pays": [
{
"bolt11": "I",
"destination": "redacted",
"payment_hash": "H",
"status": "complete",
"created_at": redacted,
"completed_at": redacted,
"preimage": "P",
"amount_msat": "redacted",
"amount_sent_msat": "redacted"
}
]
}
$ lc delpay H complete
{
"code": 211,
"message": "Payment with hash H has failed status but it should be complete"
}
```
In this case, the delpay is not able to delete a payment because the
listpays is returning only the succeeded one, so by running the
listsendpays we may see the following result where our delpay logic
will be stuck because it works to ensure that all the payments stored
in the database has the status specified by the user
```
➜ VincentSSD clightning --testnet listsendpays -k payment_hash=7fc74bedbb78f2f3330155d919a54e730cf19c11bc73e96c027f5cd4a34e53f4
{
"payments": [
{
"id": 322,
"payment_hash": "7fc74bedbb78f2f3330155d919a54e730cf19c11bc73e96c027f5cd4a34e53f4",
"groupid": 1,
"partid": 1,
"destination": "030b686a163aa2bba03cebb8bab7778fac251536498141df0a436d688352d426f6",
"amount_msat": 300,
"amount_sent_msat": 1664,
"created_at": 1679510203,
"completed_at": 1679510205,
"status": "failed",
"bolt11": "lntb1pjpkj4xsp52trda39rfpe7qtqahx8jjplhnj3tatxy8rh6sc6afgvmdz7n0llspp50lr5hmdm0re0xvcp2hv3nf2wwvx0r8q3h3e7jmqz0awdfg6w206qdp0w3jhxarfdenjqargv5sxgetvwpshjgrzw4njqun9wphhyaqxqyjw5qcqp2rzjqtp28uqy77te96ylt7ek703h4ayldljsf8rnlztgf3p8mg7pd0qzwf8a3yqqpdqqqyqqqqt2qqqqqqgqqc9qxpqysgqgeya2lguaj6sflc4hx2d89jvah8mw9uax4j77d8rzkut3rkm0554x37fc7gy92ws9l76yprdva2lalrs7fqjp9lcx40zuty8gca0g5spme3dup"
},
{
"id": 323,
"payment_hash": "7fc74bedbb78f2f3330155d919a54e730cf19c11bc73e96c027f5cd4a34e53f4",
"groupid": 1,
"partid": 2,
"destination": "030b686a163aa2bba03cebb8bab7778fac251536498141df0a436d688352d426f6",
"amount_msat": 300,
"amount_sent_msat": 3663,
"created_at": 1679510205,
"completed_at": 1679510207,
"status": "failed"
},
{
"id": 324,
"payment_hash": "7fc74bedbb78f2f3330155d919a54e730cf19c11bc73e96c027f5cd4a34e53f4",
"groupid": 1,
"partid": 3,
"destination": "030b686a163aa2bba03cebb8bab7778fac251536498141df0a436d688352d426f6",
"amount_msat": 300,
"amount_sent_msat": 3663,
"created_at": 1679510207,
"completed_at": 1679510209,
"status": "failed"
},
{
"id": 325,
"payment_hash": "7fc74bedbb78f2f3330155d919a54e730cf19c11bc73e96c027f5cd4a34e53f4",
"groupid": 1,
"partid": 4,
"destination": "030b686a163aa2bba03cebb8bab7778fac251536498141df0a436d688352d426f6",
"amount_msat": 300,
"amount_sent_msat": 4663,
"created_at": 1679510209,
"completed_at": 1679510221,
"status": "complete",
"payment_preimage": "43f746f2d28d4902489cbde9b3b8f3d04db5db7e973f8a55b7229ce774bf33a7"
}
]
}
```
This commit solves the problem by forcing the delete query in the
database to specify status too, and work around this kind of
ambiguous case.
Fixes: f52ff07558 (lightningd: allow delpay to delete a specific payment.)
Reported-by: Antoine Poinsot <darosior@protonmail.com>
Link: https://github.com/ElementsProject/lightning/issues/6114
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Co-Developed-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: delpay be more pedantic about delete logic by allowing
delete payments by status directly on the database.
For example, if we use -fsanitize=undefined, we can't do unaligned
integer access, but since we didn't test with the sanitizer flags, we
didn't know this, and set `HAVE_UNALIGNED_ACCESS=1`.
Also, add -fno-sanitize-recover= in developer mode, so we actually
fail binaries if something is detected.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have 3 personas:
- Users
- Developers
- Maintainers
The first one basically cover the installation documentation. The
latter two are sorted into the "Developer" category, and the reference
category serves as a quick lookup for facts on anything CLN related.
Changelog-Added: JSON-RPC: `listclosedchannels` to show old, dead channels we previously had with peers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
PSBTv2 support is quite low in the ecosystem, so having a call to convert
log messages and the like should be useful since they'll often be in v2.
Changelog-Added: Added setpsbtversion RPC to aid debugging and compatibility
1. Don't refer to obsolete send_invoice flag.
2. Don't refer to obsolete quantity_min field.
3. Don't refer to unsigned vs signed offers: they're all unsigned.
4. Add references to invoicerequest(7).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As reported on Discord, these are undocumented. And thus, um, hard to find!
Reported-by: Aaron Barnard
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These were deprecated in v0.12.0, hence scheduled for removal next version anyway
(use local_fund_msat and remote_funds_msat).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since it's not spec-final yet (hell, it's not even properly specified
yet!) we need to put it behind an experimental flag.
Unfortunately, we don't have support for doing this in a plugin; a
plugin must present features before parsing options. So we need to do
it in core.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Though there's already a `createinvoice` command, there are usecases where a
user may want to sign an invoice that they don't yet have the preimage to. For
example, they may have an htlc_accepted plugin that pays to obtain the preimage
from someone else and returns a `{ "result": "resolve", ... }`.
This RPC command addresses this usecase without overly complicating the
semantics of the existing `createinvoice` command.
Changelog-Added: JSON-RPC: `signinvoice` new command to sign BOLT11
invoices.
The existing description is incorrect. `createinvoice` doesn't actually
work when supplied with a custom-encoded bolt11 invoice without the
final 520 signature bits appended. If a users tries to do so, some of
their tagged fields will be incorrectly truncated.
`createinvoice` actually expects that the signatures are there, and it
simply ignores them.
See common/bolt11.c's bolt11_decode_nosig:
/* BOLT #11:
*
* The data part of a Lightning invoice consists of multiple sections:
*
* 1. `timestamp`: seconds-since-1970 (35 bits, big-endian)
* 1. zero or more tagged parts
* 1. `signature`: Bitcoin-style signature of above (520 bits)
*/
if (!pull_uint(&hu5, &data, &data_len, &b11->timestamp, 35))
return decode_fail(b11, fail, "Can't get 35-bit timestamp");
> while (data_len > 520 / 5) {
const char *problem = NULL;
u64 type, data_length;
v2 opens require you to use native segwit inputs
Changelog-Added: JSONRPC: `upgradewallet` command, sweeps all p2sh-wrapped outputs to a native segwit output
We need to be able to only use non-wrapped inputs for v2/interactive tx
protocol.
Changelog-Added: JSONRPC: `fundpsbt` option `nonwrapped` filters out p2sh wrapped inputs
I noticed that our subtables were not being cleaned, despite being "ON
DELETE CASCADE". This is because foreign keys were not enabled, but
then I got foreign key errors: rowid cannot be a foreign key anyway!
So create a real "rowid" column. We want "ON DELETE CASCADE" for
nodes and channels (and other tables in future) where we update
partially.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There were cases where address it's empty, and this cases are not right if the
field is considered optional.
This makes it required and add the field also when `--offline` is set.
Changelog-Changed: JSON-RPC: `getinfo` `address` array is always present (though may be empty)
Changelog-None
The sections on SQLite Litestream, sqlite3 .dump and VACUUM INTO commands
were to be removed six months after 0.10.3, due to issues observed in #4857.
We now recommend using --wallet=sqlite3://${main}:${backup} instead.
Also, put the "added" lines in the request schemas for new commands:
this doesn't do anything (yet?) but it keeps `make schema-added-check` happy.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This *would* be a 1-line change (add it to Makefile) except that we
previously assumed a "list" prefix on commands.
These use the default refreshing, but they could be done better using
the time-range parameters.
Suggested-by: @niftynei
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, we generate the schema part from the plugin itself.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: `sql` plugin command to perform server-side complex queries.
`"deprecated": true` is obsolete; we don't document them anyway.
Where it would have otherwise changed the GRPC wrappers, I actually put the
version number in.
We allow "listchannels" to have "satoshis" since we have some tests
that run in deprecated-api mode.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We only handle top-level objects with an array of objects:
make sure it is one before we call the routines.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's a core concept in the spec which isn't directly exposed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listchannels` added a `direction` field (0 or 1) as per gossip specification.
We didn't actually populate them properly, and the real annotations
are on inputs and outputs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: JSON-RPC: `listtransactions` `channel` and `type` field removed at top level.
We removed the command for v22.11.
Also, we removed the `refund_for` offer parameter, so remove its description
from the manpage.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Our pay code handles this correctly, but decode was still using an old model
where there was a payinfo per hop, not per path.
Reported-by: @t-bast
See: #5823
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This switch was not doing anything useful anymore.
We deprecate it anyways to notify the user about the new switch.
Changelog-Deprecated: The old --disable-ip-discovery config switch
This adds the option to explicitly enable ip-discovery, which maybe
helpful for example when a user wants TOR announced along with
discovered IPs to improve connectivity and have TOR just as a fallback.
Changelog-Added: Adds config switch 'announce-addr-discovered': on/off/auto
This fixes the CI errors when doing `make check-source`
steps 'schema-added-check' and 'schema-removed-check'.
These errors prevented CI from performing these steps correctly:
```
fatal: ambiguous argument 'main': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
```
I changed it so that CI does a `git fetch origin` at first and do
the `git diff` against 'origin/master' (which then exist).
Also fixed a bug in the script that was missing $$master in the same line.
Also I added that the script shows the actual diff before failing,
so the user quickly sees whats wrong.
Some are best copied into the schema, but some are already
out-of-date, so cleanest to remove them and rely on the generated (and
thus, checked!) fields.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: new command `listpeerchannels` now contains information on direct channels with our peers.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
TODO: It would be great to similarly annotate new/deprecated commands and
their parameters.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: doc: we now annotate what versions JSON field additions and deprecations happenened.
This means we will document deprecations and additions, rather than just
pretending they've always been that way!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. When we receive a commando command from a remote using the `filter`
field, use it.
2. Add a `filter` parameter to `commando` to send it: this is usually
more efficient than using filtering locally.
Of course, older remote nodes will ignore the filter, but that's
harmless.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: `commando` now supports `filter` as a parameter (for send and receive).
The top of the file indicates the following errors:
#define NO_ERROR 0
#define ERROR_FROM_LIGHTNINGD 1
#define ERROR_TALKING_TO_LIGHTNINGD 2
#define ERROR_USAGE 3
But we didn't use the right one for opt_parse failure, and didn't use the
correct constants everywhere.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
```
error: failed to run custom build command for `cln-grpc v0.1.2 (/home/rusty/devel/cvs/lightning/cln-grpc)`
Caused by:
process didn't exit successfully: `/home/rusty/devel/cvs/lightning/target/debug/build/cln-grpc-933c4bf5006f522c/build-script-build` (exit status: 101)
--- stdout
cargo:rerun-if-changed=proto/node.proto
cargo:rerun-if-changed=proto
--- stderr
thread 'main' panicked at 'Could not find `protoc` installation and this build crate cannot proceed without
this knowledge. If `protoc` is installed and this crate had trouble finding
it, you can set the `PROTOC` environment variable with the specific path to your
installed `protoc` binary.If you're on debian, try `apt-get install protobuf-compiler` or download it from https://github.com/protocolbuffers/protobuf/releases
For more information: https://docs.rs/prost-build/#sourcing-protoc
', /home/rusty/.cargo/registry/src/github.com-1ecc6299db9ec823/prost-build-0.11.4/src/lib.rs:1296:10
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
make: *** [plugins/Makefile:211: target/debug/examples/cln-plugin-startup] Error 101
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Deprecated v0.11.0.
Changelog-Removed: JSON-RPC: `pay` for a bolt11 which uses a `description_hash`, without setting `description` (deprecated v0.11.0).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Vincenzo Palazzo
Shahana Farooqui
Rusty Russell
avatar4d
Matt Morehouse
Adi Shankara
Christian Decker
Jon Griffiths
Amin Bashiri
Anmol Agrawal
Greg Sanders
Kristaps Kaupe
Alex Myers
Carl Dong
niftynei
Michael Schmoock
Carl Dong
Joel Klabo
Ken Sedgwick
tony-voltage
Justin Litchfield
Dennis Reimann
Simon Vrouwe
arowser
w0xlt