This is in line with the warnings draft, where all-zeroes in a
channel_id is no longer special (i.e. it will be ignored).
But gossipd would send these if it got upset with us, so it's best
practice to ignore them for now anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: we treat error messages from peer which refer to "all channels" as warnings, not errors.
rearranges the`peer_connected_hook_payload` definition to the location
where this is used in the file.
Fixes certain blanklines and linebreaks to make the code look nicer.
payload is owned by the peer, which is freed in this case, then we
free payload (again).
==1404== Invalid read of size 8
==1404== at 0x1F39E8: to_tal_hdr (tal.c:174)
==1404== by 0x1F43A4: tal_free (tal.c:479)
==1404== by 0x14B3D1: peer_connected_hook_cb (peer_control.c:1087)
==1404== by 0x15D6E9: plugin_hook_call_ (plugin_hook.c:288)
==1404== by 0x14B40E: plugin_hook_call_peer_connected (peer_control.c:1090)
==1404== by 0x14B5B8: peer_connected (peer_control.c:1135)
==1404== by 0x122FCF: connectd_msg (connect_control.c:310)
==1404== by 0x160291: sd_msg_read (subd.c:480)
==1404== by 0x15FBE7: read_fds (subd.c:308)
==1404== by 0x1E37D1: next_plan (io.c:59)
==1404== by 0x1E434E: do_plan (io.c:407)
==1404== by 0x1E438C: io_ready (io.c:417)
==1404== Address 0x2fcd2268 is 24 bytes inside a block of size 336 free'd
==1404== at 0x4C32D3B: free (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==1404== by 0x1F416E: del_tree (tal.c:421)
==1404== by 0x1F40F2: del_tree (tal.c:412)
==1404== by 0x1F442C: tal_free (tal.c:486)
==1404== by 0x148816: delete_peer (peer_control.c:120)
==1404== by 0x148899: maybe_delete_peer (peer_control.c:136)
==1404== by 0x13A970: destroy_uncommitted_channel (opening_common.c:29)
==1404== by 0x1F3BB1: notify (tal.c:240)
==1404== by 0x1F40A0: del_tree (tal.c:402)
==1404== by 0x1F442C: tal_free (tal.c:486)
==1404== by 0x13D3E9: peer_start_openingd (opening_control.c:911)
==1404== by 0x14B3C2: peer_connected_hook_cb (peer_control.c:1086)
==1404== Block was alloc'd at
==1404== at 0x4C31B0F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==1404== by 0x1F3C1B: allocate (tal.c:250)
==1404== by 0x1F41B4: tal_alloc_ (tal.c:428)
==1404== by 0x14B454: peer_connected (peer_control.c:1105)
==1404== by 0x122FCF: connectd_msg (connect_control.c:310)
==1404== by 0x160291: sd_msg_read (subd.c:480)
==1404== by 0x15FBE7: read_fds (subd.c:308)
==1404== by 0x1E37D1: next_plan (io.c:59)
==1404== by 0x1E434E: do_plan (io.c:407)
==1404== by 0x1E438C: io_ready (io.c:417)
==1404== by 0x1E6552: io_loop (poll.c:445)
==1404== by 0x12E2AD: io_loop_with_timers (io_loop_with_timers.c:24)
Fixes: #4329
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Prior to this, all reconnect logic lived in channeld. If you
disconnected before we finished building a funding transaction, that was
no big deal. Now, however, we're waiting for the funding to lock in in
dualopend, instead of handing straight to channeld to wait.
So we need a way to restart dualopend.
v2 channel opens are going to happen over in dualopend. In order
to make sure that these don't end up in the wrong place/to keep track of
the difference between "waiting for sigs" and "have merely initiatlized
a channel", we add two new states to the channel state machine.
A channel that 'originates' in dualopend will only ever arrive at
channeld in the state CHANNELD_NORMAL.
Since this all stays in dualopend/dual_open_control, we can hold
onto the openchannel_signed command to wait for a response here locally.
Previously we were splitting across the channeld/openingd boundary.
Our new "decode" command will also handle bolt11. We make a few cleanups:
1. Avoid type_to_string() in JSON, instead use format functions directly.
2. Don't need to escape description now that JSON core does that for us.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This adds a `state_change` 'cause' to a channel.
A 'cause' is some initial 'reason' a channel was created or closed by:
/* Anything other than the reasons below. Should not happen. */
REASON_UNKNOWN,
/* Unconscious internal reasons, e.g. dev fail of a channel. */
REASON_LOCAL,
/* The operator or a plugin opened or closed a channel by intention. */
REASON_USER,
/* The remote closed or funded a channel with us by intention. */
REASON_REMOTE,
/* E.g. We need to close a channel because of bad signatures and such. */
REASON_PROTOCOL,
/* A channel was closed onchain, while we were offline. */
/* Note: This is very likely a conscious remote decision. */
REASON_ONCHAIN
If a 'cause' is known and a subsequent state change is made with
`REASON_UNKNOWN` the preceding cause will be used as reason, since a lot
(all `REASON_UNKNOWN`) state changes are a subsequent consequences of a prior
cause: local, user, remote, protocol or onchain.
Changelog-Added: Plugins: Channel closure resaon/cause to channel_state_changed notification
For compatibility, we only do this if `allow-deprecated-apis` is false
for now. Otherwise scripts parsing should use `grep -v '^# '` or
start using `-N none`.
Changelog-Added: JSON-RPC: `close` now sends notifications for slow closes (if `allow-deprecated-apis`=false)
Changelog-Deprecated: cli: scripts should filter out '^# ' or use `-N none`, as commands will start returning notifications soon
Fixes: #3925
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
...right time.
We re-send the tx_sigs on start/init/reconnect until we've gotten a
funding_locked from our peer. We also build it in channeld now, instead
of in dualopend, and don't pass in a message for them anymore
`openchannel_signed` commands hang out across the openingd/channeld
boundary -- we don't return until we've successfully broadcast the
transaction (or timed out waiting for them to send a tx_sigs back).
We need the PSBT to create the finalized tx from once the peer's
tx_signatures are received. Since we're passing the PSBT, we no longer
need the secondary message to be passed, as it was derived from the
PSBT.
Also removes now unused witness serialization code
v2 of channel establishment, in the accpeter case, now sends 2 messages
to our peer after saving the information to disk (our commitment
signatures and our funding transaction signatures)
v2 channel open uses a different method to derive the channel_id, so now
we save it to the database so that we dont have to remember how to
derive it for each.
includes a migration for existing channels
This avoids overwriting the ones in git, and generally makes things neater.
We have convenience headers wire/peer_wire.h and wire/onion_wire.h to
avoid most #ifdefs: simply include those.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's actually not possible to currently tell if you're using anchor_outputs
with a peer (since it depends on whether you both supported it at *channel open*).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-added: JSON-RPC: `listpeers` shows `features` list for each channel.
Note that other directories were explicitly depending on the generated
file, instead of relying on their (already existing) dependency on
$(LIGHTNINGD_HSM_CLIENT_OBJS), so we remove that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means some files get renamed, and I took the opportunity to clarify
our naming (the *d* is important!)
1. channeld/channel_wire.csv -> channeld/channeld_wire.csv
2. channeld/gen_channel_wire.h -> channeld/channeld_wiregen.h
3. enum channel_wire_type -> enum channeld_wire
4. WIRE_CHANNEL_FUNDING_DEPTH -> WIRE_CHANNELD_FUNDING_DEPTH.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This also means we subtract 660 satoshis more everywhere we subtract
the base fee (except for mutual close, where the base fee is still
used).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
HTLC fees increase (larger weight), and the fee paid by the opener
has to include the anchor outputs (i.e. 660 sats).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is what txsend does, only we have a psbt so we have
to change the db interface to take a wally_tx.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
On node start we replay onchaind's transactions from the database/from
our loaded htlc table. To keep things tidy, we shouldn't notify the
ledger about these, so we wrap pretty much everything in a flag that
tells us whether or not this is a replay.
There's a very small corner case where dust transactions will get missed
if the node crashes after the htlc has been added to the database but
before we've successfully notified onchaind about it.
Notably, most of the obtrusive updates to onchaind wrappings are due to
the fact that we record dust (ignored outputs) before we receive
confirmation of its confirmation.
Previously we've used the term 'funder' to refer to the peer
paying the fees for a transaction; v2 of openchannel will make
this no longer true. Instead we rename this to 'opener', or the
peer sending the 'open_channel' message, since this will be universally
true in a dual-funding world.
One is called on every plugin return, and tells us whether to continue;
the other is only called if every plugin says ok.
This works for things like payload replacement, where we need to process
the results from each plugin, not just the final one!
We should probably turn everything into a chained callback next
release.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
They callback must take ownership of the payload (almost all do, but
now it's explicit).
And since the payload and cb_arg arguments to plugin_hook_call_() are
always identical, make them a single parameter.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Michael Schmoock
niftynei
Christian Decker