We keep a chain_hash in struct daemon, becayse otherwise we end up with
`&peer->daemon->rstate->chainparams->genesis_blockhash` which is a bit
ridiculous.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This avoids some very ugly switch() statements which mixed the two,
but we also take the chance to rename 'towire_gossip_' to
'towire_gossipd_' for those inter-daemon messages; they're messages to
gossipd, not gossip messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Messages from a peer may be invalid in many ways: we send an error
packet in that case. Rather than internally calling peer_error,
however, we make it explicit by having the handle_ functions return
NULL or an error packet.
Messages from the daemon itself should not be invalid: we log an error
and close the fd to them if it is. Previously we logged an error but
didn't kill them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If another channel has set the optional `htlc_maximum_msat` field,
we should correctly parse that field and respect it when drawing up
routes for payments.
And use ARRAY_SIZE() everywhere which will break compile if it's not a
literal array, plus assertions that it's the same length.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have a lot of infrastructure to delay local channel_updates to
avoid spamming on each peer reconnect; we had to keep tracking of
pending ones though, in case we needed the very latest for sending an
error when failing an HTLC.
Instead, it's far simpler to set the local_disabled flag on a channel
when we disconnect, but only send a disabling channel_update if we
actually fail an HTLC.
Note: handle_channel_update() TAKES update (due to tal_arr_dup), but we
didn't use that before. Now we do, add annotation.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
BOLT 7's been updated to split the flags field in `channel_update`
into two: `channel_flags` and `message_flags`. This changeset does the
minimal necessary to get to building with the new flags.
If we receive a channel_announce but not a channel_update, we store the announce
but don't put it in the broadcast map.
When we delete a channel, we check if the node_announcement broadcast
now preceeds all channel_announcements, and if so, we move it to the
end of the map. However, with a channel_announcement at index '0',
this test fails.
This is at least one potential cause of the node map getting out of order.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These happen after we compact the store; every log I've seen of a
restart on a real node has a message about truncating the store,
because node_announcements predate channel_announcements.
I extracted one such case from testnet, and reduced it to test here.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As pointed out by @rustyrussell the capacity is now always defined, so we can
fold that into the construction of the channel itself.
Reported-by: Rusty Russell <@rustyrussell>
Signed-off-by: Christian Decker <@cdecker>
We used to just manually set ROUTING_FLAGS_DISABLED, but that means we
then suppressed the real channel_update because we thought it was a
duplicate!
So use a local flag: set it for the channel when the peer disconnects,
and clear it when channeld sends a local update.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We wrap it in 'struct pubkey' for typesafety and consistency, and the
next patch takes advantage of that when we move to pubkey_eq.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This lets detect if a node announce preceeds a channel announce once we
delete the node announcement.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In general, we need to only publish node announcements after
publishing channel announcements, though we can accept node
announcements as soon as we see channel announcements. So we keep a
flag for those node_announcement which haven't been broadcast yet.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
handle_pending_cannouncement might not actually add the announcment,
as it could be waiting for a channel_update. We need to wait for
the actual announcement before considering announcing our node.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
@cdecker points out that in test_forward, where we manually create a route,
we get an error back which contains an update for an unknown channel.
We should still note this, but it's not an error for testing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note: this will break the gossip_store if they have current channels,
but it will fail to parse and be discarded.
Have local_add_channel do just that: the update is logically separate
and can be sent separately.
This removes the ugly 'bool add_to_store' flag.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. If we have a channel_announcement, the channel is public, otherwise
it's not. Not all channels are public, as they can be local: those
have a NULL channel_announcement.
2. If we don't have a channel_update, we know nothing about that half
of the channel, and no other fields are valid.
3. We can tell if a half channel is disabled by the flags field directly.
Note that we never send halfchannels without an update over
gossip_getchannels_reply so that marshalling/unmarshalling can be
vastly simplified.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Make the update/announce messages own the element in the broadcast map
not the other way around.
Then we keep a pointer to the message, and when we free it
(eg. channel closed, update replaces it), it gets freed from the
broadcast map automatically.
The result is much nicer!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Basically, if we don't have an announcement for the channel, stash it,
and once we get an announcement, replay if necessary.
Fixes: #1485
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Someone could try to announce an internal address, and we might probe
it.
This breaks tests, so we add '--dev-allow-localhost' for our tests, so
we don't eliminate that one. Of course, now we need to skip some more
tests in non-developer mode.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Internally both payment and routing use 64-bit, but the interface
between them used 32-bit.
Since both components already support 64-bit we should use that.
This was a tricky one to find, it turns out that some nodes are sending
node_announcements even if they don't have a channel announced yet. If they are
a peer and the channel is currently verifying then we'll have a local channel in
the network view, hence accept the node_announcement, but when replaying, the
node_announcement will be replayed and we won't have a channel yet. This just
skips node_announcements, which is always safe.
Reported-by: @laszlohanyecz
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Messages from peers and messages from the gossip_store now have completely
different entrypoints, so we don't need to trace their origin around the message
handling code any longer.
Moves any modifications based on an incoming gossip message into its own
function separate from the message verification. This allows us to skip
verification when reading messages from a trusted source, e.g., the
gossip_store, speeding up the gossip replay.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
When we read from the gossip_store we set store=false so that we don't duplicate
messages in the store.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We currently keep two copies; one in the broadcast structure to send
in order, and one in the routing information. Since we already keep
the broadcast index in the routing information, use that.
Conveniently, a zero index is the same as the old NULL test.
Rename struct node's announcement_idx to node_announce_msgidx to
make it match the other users.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As per BOLT #7.
We don't do this for channel_update which are queued because the
channel_announcement is pending though.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We already have 'struct node', so rename 'struct routing_channel' to
'struct chan', and 'struct node_connection' to 'struct half_chan'.
Other minor changes:
1. rstate->channels -> rstate->chanmap.
2. 'connections' -> 'half'.
3. connection_to -> half_chan_to
4. connection_from -> half_chan_from
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The containing `struct routing_channel` contains src and dst, so
remove them. However, the channel_update msgidx does belong int
`struct node_connection` along with the channel_update.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
To remove the redundant fields in `struct node_connection` (ie. 'src'
and 'dst' pointers) we need to deal with `struct routing_channel`.
This means we get a series of channels, from which the direction is
implied, so it's a bit more complex to decode. We add a helper
`other_node` to help with this, and since we're the only user of
`connection_to` we change that function to return the index.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
lisa neigut
Christian Decker
ZmnSCPxj
practicalswift