This isuseful to find completely dead channels which are worthy of
closing.
Changelog-Added: JSON-RPC: `listpeerchannels` field `last_stable_connection` showing when we last held an established channel for a minute or more.
Changelog-Added: JSON-RPC: `listclosedchannels` field `last_stable_connection` showing when we last held an established channel for a minute or more.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is useful to see if we've really made progress, or just bounced
off the peer (e.g. it doesn't know the channel, or we have fallen
behind somehow).
Changelog-Added: JSON-RPC: `listpeerchannels` new field `reestablished` set once we've exchanged `channel_reestablish` messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, we were sending `announcement_signatures` before
`channel_reestablish`; we allow this because LND used to do it, but
it's not spec compliant.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It then waits 10 more seconds (for plugins to call setlease, especially)
before it will update a node_announcement.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rather than take the first two from peers with committed channels, use
the most common address given by at least 2 peers, and accept the majority
from non-committed peers if there are no committed peers.
This works well with the node_announcement rework, which waits until
everyone has a chance to connect before creating the node_announcement.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This commit is a bit messy, but it tries to do the minimal switchover.
Some tests change, so those are included here.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I did some CHANGELOG and git digging to see when these were deprecated, and
some were very old (v0.8.2!). But since they didn't warn users loudly, I
chose to do so this release only.
I renamed ld's `deprecated_apis` to `deprecated_ok` to make sure I
caught them all.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is redundant if it's a public channel, but vital if it's not. Publishing unconditionally makes
it easier for gossmap: we create a local modification all the time, even if redundant (and we can
have the actual capacity ceiling accurate in this case, since we know it for local channels).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listpeerchannels` now shows gossip update contents (even if channel unannounced).
From the spec:
Once peers are ready to exchange commitment signatures, they must remember
the details of the funding transaction to allow resuming the signatures
exchange if a disconnection happens.
Basically this means we add channels to the database before we've gotten
commitments for them; it's nice that there's now a state for commitments
recevied but we now save the channel prior to that.
This commit makes it possible to track the pre-commit-rcvd but not quite
open-init state.
This means refactoring out some of the generic anchor info, from the
per-commitment-tx info (we can have at least two, perhaps more with
splicing!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This makes `check` much more thorough, and useful.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `check` now does much more checking on every command (not just basic parameter types).
We had a complaint that you can't CPFP a mutual close, which you
should be able to do.
Fixes: #6692
Changelog-Fixed: wallet: close change outputs show up immediately in `listfunds` so you can CPFP.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now we've asserted that channeld would tell lightningd the same thing it
would do anyway, we can simply have channeld say "enable=True|False" and
lightningd fill in the other fields.
This means there's a pile of things channeld doesn't need to know any more!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Previously, every broadcast was attached to a channel, but we can
make it explicit, so when the context is freed, the re-broadcast stops
(if rebroadcast is set).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Previously, we would forward the message to a subd, but now we have
the case where the subd is gone, but we're still connected. If the
peer anything but a reestablish in that state, we drop the connection.
Instead, an error should always make us fail the channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now we're not always using the same functions to watch during
dual-funding opening, we need to make sure we're watching the close
(in particular, df close before the opening is confirmed).
So, keep a pointer, and if it's not set in drop_to_chain, set it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We used the original channel funding output number. I'm not sure if this
was true in the previous code, or a regression I introduced, but it
caused occasonal failures in test_splice_gossip!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use the *same* callback for the funding tx, as well as for inflight dual-funding txs, as well as inflight splice txs. This is deeply confusing!
Instead, use explicit cbs for splicing and df. Once they're locked in, use the normal callback.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The latter is used when we're put in the db, the former is the uncommitted state.
Currently dbid == 0 is used in addition to the state, which is unwieldy.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Experimental: JSON-RPC: added new dual-funding state `DUALOPEND_OPEN_COMMITTED`
We usually hand times by copy, not by pointer (and if we did, they should
be const!). I noticed this particularly for the state changed code, but
it goes down to to json_add_timeiso, so I fixed that too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We should use capability tests for states (can you add htlcs?) rather than vague
descriptions (are you closing?).
And as much as possible, use switch () statements to force us to think
about all the cases, especially when we add new states!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently it's half done in funding_depth_cb, and half in
channeld_tell_depth. It's very confusing as a result,
with splicing, dual-funding and zeroconf.
This does introduce a behaviour change: if a channel is NORMAL and
it gets reorganized, we force close (unless we were the one who funded
it, or it's zeroconf anyway). This is safer than continuing to use
the channel in this case!
Some tests are changed to zeroconf to make them work, but v2 doesn't
support zeroconf, so that's removed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Not just if htlc addition is too slow, make this the default. dual-open's txabort
is excluded, however.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And require --developer to use them.
Also refuse redirection to deprecated APIs if deprecated APIs are disabled!
Changelog-Removed: `dev-sendcustommsg` (use `sendcustommsg`, which was added in v0.10.1)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We check for list_empty, so it's always actually set.
```
lightningd/peer_control.c: In function ‘drop_to_chain’:
lightningd/peer_control.c:353:17: error: ‘tx’ may be used uninitialized [-Werror=maybe-uninitialized]
353 | resolve_close_command(ld, channel, cooperative, tx);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lightningd/peer_control.c:341:36: note: ‘tx’ was declared here
341 | struct bitcoin_tx *tx;
| ^~
cc1: all warnings being treated as errors
make: *** [Makefile:298: lightningd/peer_control.o] Error 1
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were allowed to, but the spec removed that. So we handle warnings
differently from errors now.
This also means the LND "internal error" workaround is done in
lightningd (we still disconnect, but we don't want to close channel).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: we no longer disconnect every time we receive a warning message.
During tests we can see that the subdaemon can be restarted unnecessarily if we're slow enough; we don't need to do so if it's still running.
Reported-by: Matt Morehouse <mattmorehouse@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Don’t send the funding spend to onchaind if we detect it in inflights (aka. a splice). While we already prevented onchaind_funding_spent from being called directly, the call to wallet_channeltxs_add meant onchaind_funding_spent would be called *anyway* on restart. This is now fixed.
Additionally there was a potential for a race problem depending on the firing order of the channel depth and and funding spent events.
Instead of requiring these events fire in a specific order, we make a special “memory only” inflight object to prevent the race regardless of firing order.
Changelog-Fixed: Splice: bugfix for restart related race condition interacting with adversarial close detection.
Thread the signed tx through so close's JSON return contains that,
rather than the unsigned channel->last_tx.
We have to split the "get cmd_id" from "resolve the close commands" though;
and of course, as before, we don't actually print the txids of multiple
transactions even though we may have multi in flight due to splice!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: JSON-RPC: `close` returns a `tx` field with witness data populated (i.e. signed).
Fixes: #6440
Update the lightningd <-> channeld interface with lots of new commands to needed to facilitate spicing.
Implement the channeld splicing protocol leveraging the interactivetx protocol.
Implement lightningd’s channel_control to support channeld in its splicing efforts.
Changelog-Added: Added the features to enable splicing & resizing of active channels.
Update gossip routiens and various other hecks on the channel state to consider AWAITING_SPLICE to be routable and treated similar to CHANNELD_NORMAL.
Small updates to psbt interface
Changelog-None
Clean restart of daemon after a tx-abort is a nice way to work around
the 'persistent' disconnect that we t-bast noticed.
Changelog-Fixed: `dualopend`: Fix behavior for tx-aborts. No longer hangs, appropriately continues re-init of RBF requests without reconnction msg exchange.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `setchannel` adds a new `ignorefeelimits` parameter to allow peer to set arbitrary commitment transaction fees on a per-channel basis.
Rusty Russell
niftynei
Dusty Daemon