This will give the user an option to set a custom port when using
discovered IPs for node_announcents. Without this, only the selected
networks default port can used.
Changelog-Added: Adds --announce-addr-discovered-port config option to set custom port for IP discovery.
This switch was not doing anything useful anymore.
We deprecate it anyways to notify the user about the new switch.
Changelog-Deprecated: The old --disable-ip-discovery config switch
This adds the option to explicitly enable ip-discovery, which maybe
helpful for example when a user wants TOR announced along with
discovered IPs to improve connectivity and have TOR just as a fallback.
Changelog-Added: Adds config switch 'announce-addr-discovered': on/off/auto
After connecting 100,000 peers with one channel each (not all at
once!), we see various places where we exhibit O(N^2) behaviour.
Fix these by keeping a map of id->peer instead of a simple
linked-list.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This broke BTCPayServer, so revert. I originally (accidentally!)
implemented this such that it broadcast both DNS and IP entries, but
Michael reported earlier that they still don't propagage well, so
simply suppress them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #5795
Changelog-Changeed: Config: `announce-addr-dns` needs to be set to *true* to put DNS names into node announcements, otherwise they are suppressed.
Changelog-Deprecated: Config: `announce-addr-dns` (currently defaults to `false`). This will default to `true` once enough of the network has upgraded to understand DNS entries.
The "path" is just a message to ourselves. This meets the minimal
requirement for bolt12 invoices: that there be a blinded path (at
least so we can use the path_id inside in place of "payment_secret").
We expose the method to make this path_id to a common routine: offers
will need this for generating more sophisticated paths.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We had a scheme where lightningd itself would put a per-node secret in
the blinded path, then we'd tell the caller when it was used. Then it
simply checks the alias to determine if the correct path was used.
But this doesn't work when we start to offer multiple blinded paths.
So go for a far simpler scheme, where the secret is generated (and
stored) by the caller, and hand it back to them.
We keep the split "with secret" or "without secret" API, since I'm
sure callers who don't care about the secret won't check that it
doesn't exist! And without that, someone can use a blinded path for a
different message and get a response which may reveal the node.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the one place where we hand point32 over the wire internally, so
remove it.
This is also our first hsm version change!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Technically this is a non-conformance with the spec, hence the `dev`
flag to opt-in, however I'm being told that it is also implemented in
other implementations. I'll follow this up with a proposal to the spec
to remove the checks we now bypass.
This is a good sanity check that users understand that if they upgrade
to master mid-cycle they can't go back!
Suggested-by: @wtogami
Changelog-Added: Config: `--database-upgrade=true` required if a non-release version wants to (irrevocably!) upgrade the db.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were waiting too long for the reconnect to happen (60s default),
which caused this test to timeout.
When testing, let's speed up the reconnect.
L2 tried to reconnect but didn't have connection information in its
gossip -- is there a way to ask/save connection data from a node you're
making a channel with that doesn't rely on their node_announcement?
I've wanted this for a while: the ability to log to multiple places
at once.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: lightningd: `log-file` option specified multiple times opens multiple log files.
This adds config and commandline options for htlc_min_msat, htlc_max_msat and
announce_discovered_ip. The default is 0msat for htlc_min_msat, unlimited for
htlc_max_msat and enabled for announce_discovered_ip.
The announce_discovered_ip gets the disable commandline switch --disable-ip-discovery
Changelog-added: Config options for htlc_min_msat, htlc_max_msat and announce_discovered_ip.
I removed these prematurely: we *haven't* had a release since
introducing them!
This consists of reverting d15d629b8b
"plugins/fetchinvoice: remove obsolete string-based API." and
plugins/fetchinvoice: remove obsolete string-based
API. "onion_messages: remove obs2 support."
Some minor changes due to updated fromwire_tlv API since they
were removed, but not much.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: REVERT: Removed backwards compat with onion messages from v0.10.1.
lightningd would race with the subd destructor to do the waitpid(),
resulting in UNUSUAL log messages, but also us missing if a plugin
was killed via a signal.
We can also get rid of the gratuitous waitpid() in test_subdaemons.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This loads up 20MB of plugins temporarily; we seem to be getting OOM
killed under CI and I wonder if this is contributing.
Doesn't significantly reduce runtime here, but I have lots of memory.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
To reduce the surface area of amount of a channel balance that can be
eaten up as htlc dust, we introduce a new config
'--max-dust-htlc-exposure-msat', which sets the max amount that any
channel's balance can be added as dust
Changelog-Added: config: new option --max-dust-htlc-exposure-msat, which limits the total amount of sats to be allowed as dust on a channel
We put this in reply paths, so we can tell if they are used. This lets us
avoid responding unless the correct reply path is used.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
After recent header files clean-up it was not possible to
build c-lightning 7401b2682. This patch fixes it both for
Alpine Linux and OpenBSD.
Proposed-by: nathanael <nathanael@dalliard.ch>
Changelog-None
That was quick!
We remove the 50% test, since the default is now to use quickclose.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: We now perform quick-close if the peer supports it.
Based on a commit by @niftynei, but:
- Separated quickclose logic from main loop.
- I made it indep of anchor_outputs, use and option instead.
- Disable if they've specified how to negotiate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This renames all occurences of use_proxy_always to always_use_proxy
to keep it inline with config values. This was a bit confusing.
Only significant change is that the payload in the plugins init
requests also contained the old name. No plugin currently seems to make
use of this variable yet. The old name 'use_proxy_always' is added when
deprecated APIs is enabled.
Changelog-Deprecated: Plugins: Renames plugin init 'use_proxy_always' to 'always_use_proxy'
Useful for regtest and testnet. Sure, you shouldn't use this on mainnet,
but I haven't restricted it because our users are usually pretty clever.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #1806
Changelog-Added: config: `force_feerates` option to allow overriding feerate estimates (mainly for regtest).
Incoming HTLCs are rejected by the HTLC logic if the payload contains
an even type that `lightningd` doesn't recognize. This is to prevent
us from accidentally accepting a payment that has extra semantics
attached (for example if we get a keysend payment and don't know what
to do with the TLV field containing the message we should reject it,
otherwise the overall semantics of the message delivery fail).
You still shouldn't do this (you could get some transient failures),
but at least you have a decent chance if you reinstall over a running
daemon, instead of getting confusing internal errors if message
formats have changed.
Changelog-Added: lightningd: we now try to restart if subdaemons are upgraded underneath us.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #4346
The main change which affects us is that 2016 blocks to forget a channel
is a fixed number in the spec; we make this clear by renaming the
(developer-only) max_funding_unconfirmed to dev_max_funding_unconfirmed
and making it compile DEVELOPER only.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The fetchinvoice and offers plugins disable themselves if the option
isn't enabled (it's enabled by default on EXPERIMENTAL_FEATURES).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: `experimental-offers` enables fetch, payment and creation of (early draft) offers.
Since this all stays in dualopend/dual_open_control, we can hold
onto the openchannel_signed command to wait for a response here locally.
Previously we were splitting across the channeld/openingd boundary.
Invoices are signed with our own key, but we use a transient payer_key with a
tweak for invoice_requests (and refunds).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
`openchannel_signed` commands hang out across the openingd/channeld
boundary -- we don't return until we've successfully broadcast the
transaction (or timed out waiting for them to send a tx_sigs back).
Michael Schmoock
Rusty Russell
Christian Decker
niftynei
Jan Sarenik
YOSHIDA Masanori