Since plugins will start sending them soon, and they are likely to get
it wrong sometimes, be a bit more lenient, warn them in the logs
instead and then make sure it doesn't accidentally work anyway.
We will eventually start emitting and dispatching custom notifications
from plugins just like we dispatch internal notifications. In order to
get reasonable error messages we need to make sure that the topics
plugins are asking for were correctly registered. When doing this we
don't really care about whether the plugin that registered the
notification is still alive or not (it might have died, but
subscribers should stay up and running), so we keep a list of all
topics attached to the `struct plugins` which gathers global plugin
information.
Behold! An immaculately concepted plugin for configuring your node to do
amazing things*
*fund channel open requests
Changelog-Added: Plugins: Add `funder` plugin, which allows you to setup a policy for funding v2 channel open requests. Requres --experimental-dual-fund option
We don't always get two transactions on line 1019; the comment is
confused (only one penalty tx successfully comes out of l3). So make
sure we get the other transactions when we expect them, and then
make this test more specific.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
You still shouldn't do this (you could get some transient failures),
but at least you have a decent chance if you reinstall over a running
daemon, instead of getting confusing internal errors if message
formats have changed.
Changelog-Added: lightningd: we now try to restart if subdaemons are upgraded underneath us.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #4346
We didn't wait for the sendtx to complete before shutting down,
and hence timed out:
```
l2.daemon.wait_for_log('Broadcasting funding tx')
l1.stop()
l2.stop()
bitcoind.generate_block(6)
l1.restart()
l2.restart()
# Make sure we're ok.
> l2.daemon.wait_for_log(r'to CHANNELD_NORMAL')
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Channel can be inactive before it disconnects, apparently. Check
explicitly for the disconnected state so we get the expected error.
Here's what happened:
```
# Can't pay while its offline.
with pytest.raises(RpcError, match=r'failed: WIRE_TEMPORARY_CHANNEL_FAILURE \(First peer not ready\)'):
> l1.rpc.sendpay(route, rhash)
E Failed: DID NOT RAISE <class 'pyln.client.lightning.RpcError'>
```
And the logs show that the outgoing HTLC was sent to channeld before it
realized the connection was closed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Change the address in the canned db: it seems we won the lottery and
l1 connected, and got an error!
```
E ValueError:
E Node errors:
E - lightningd-1: had warning messages
E Global errors:
...
lightningd-1: 2021-04-07T02:44:53.579Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: peer_out WIRE_CHANNEL_REESTABLISH
lightningd-1: 2021-04-07T02:44:53.579Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: peer_in WIRE_GOSSIP_TIMESTAMP_FILTER
lightningd-1: 2021-04-07T02:44:53.580Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: peer_in WIRE_ERROR
lightningd-1: 2021-04-07T02:44:53.580Z INFO 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-chan#1: Peer transient failure in CHANNELD_NORMAL: channeld WARNING: error channel fdeb1ea12e02aa043f66ba581e969a1882d21142b19429995c6733bb71070bb6: Multiple channels unsupported
lightningd-1: 2021-04-07T02:44:53.580Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-chan#1: Will try reconnect in 60 seconds
```
So I changed the port in the db to "1" which will never succeed:
```
sqlite> .dump peers
PRAGMA foreign_keys=OFF;
BEGIN TRANSACTION;
CREATE TABLE peers ( id INTEGER, node_id BLOB UNIQUE, address TEXT, PRIMARY KEY (id));
INSERT INTO peers VALUES(1,X'022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59','127.0.0.1:38723');
COMMIT;
sqlite> UPDATE peers SET address="127.0.0.1:1"
...> ;
sqlite> .dump peers
PRAGMA foreign_keys=OFF;
BEGIN TRANSACTION;
CREATE TABLE peers ( id INTEGER, node_id BLOB UNIQUE, address TEXT, PRIMARY KEY (id));
INSERT INTO peers VALUES(1,X'022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59','127.0.0.1:1');
COMMIT;
sqlite>
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
You can now activate dual-funded channels using the
`--experimental-dual-fund` flag
Changelog-Changed: Config: `--experimental-dual-fund` runtime flag will enable dual-funded protocol on this node
This was flaky because sometimes we'd generate blocks before the funding
transaction reached the mempool.
If we wait until it's in, it works as expected.
[ Neatened to use wait_for_mempool arg --RR ]
We updated the "UNKNOWN TYPE channel_id" -> the actual channel id;
the reason for why the error fails shouldn't be restrictive (we just
know that it fails)
There is little point in faking a self-payment, but we should also not
crash :-)
Fixes#4438
Changelog-Fixed: keysend: Keysend returns an error when a self-payment is requested
Otherwise, we might find an address other than the one given and
the user might think that address worked.
Fixes: #4185
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `connect` returns `address` it actually connected to
And update all the in-tree callers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSON-RPC: `fundchannel_complete` `txid` and `txout` parameters (use `psbt`)
Changelog-Added: lightningd: experimental-shutdown-wrong-funding to allow remote nodes to close incorrectly opened channels.
Changelog-Added: JSON-RPC: close has a new `wrong_funding` option to try to close out unused channels where we messed up the funding tx.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's a version of this that keeps the PSBT in memory and does some
fancy addition/subtraction of unuseable parts for the v2's, however
it's much easier and simpler to simply error on the peer and re-start
from the very beginning.
This only works if we haven't gotten commitments from the peer yet (in
fact either method would only work if we haven't got commitments from
the peer yet), so if we've got commitments from them we simply mark them
as failed an go again.
In a perfect world, we'd remember what inputs we used last time, and
reuse those again on the re-attempt, which would pefectly guarantee both
that the failed opens (ones w/ commitments exchanged) would be canceled
after this completes (and we could re-try the failed again).
As it is, this is not perfect. It is, however, servicable.
Allows us to clean up an in-progress open that we won't be completing
Changelog-Added: EXPERIMENTAL JSON-RPC: Permit user-initiated aborting of in-progress opens. Only valid for not-yet-committed opens and RBF-attempts
The `rbf_channel` hook uses `our_funding_msat`, which is a nicer
and more easily understood than the `openchannel2`
`accepter_funding_msat`.
This updates the `openchannel2` hook to use the same nomenclature as
`rbf_channel`.
We were not aborting if we had routehints, even though all routehints
may have been filtered out.
Changelog-Fixed: pay: `pay` will now abort early if the destination is not reachable directly nor via routehints.
We would happily spin on attempts that are doomed to fail because we
don't know the entrypoint. Next up: remove routehints whose
entrypoints are known but unreachable.
We consolidate to the latest/singular RFC patch for dual-funding, so
there's just a single patchfile for the change. Plus we move back to the
opener setting the desired feerate, the accepter merely declines to
participate if they disagree with the set rate.
Looks like #4394 treated a symptom but not the root cause. We were
actually sending the message framed with the WIRE_CUSTOMMSG_OUT and
the length prefix over the encrypted connection to the peer. It just
happened to be a valid custommsg...
This fixes the issue, and this time I made sure we actually send the
raw message over the wire. However for backward compatibility we
needed to imitate the faulty behavior which is 90% of this patch :-)
Changelog-Fixed: plugin: `dev-sendcustommsg` included the type and length prefix when sending a message.
Christian Decker
niftynei
Rusty Russell