Might help alleviate some of the issues of having to run a full-node
on the same machine as `lightningd`.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Exception: Node /tmp/lightning-t5gxc6gs/test_closing_different_fees/lightning-2/ has memory leaks: [{'value': '0x55caa0a0b8d0', 'label': 'ccan/ccan/tal/str/str.c:90:char[]', 'backtrace': ['ccan/ccan/tal/tal.c:467 (tal_alloc_)', 'ccan/ccan/tal/tal.c:496 (tal_alloc_arr_)', 'ccan/ccan/tal/str/str.c:90 (tal_vfmt)', 'lightningd/log.c:131 (new_log)', 'lightningd/subd.c:632 (new_subd)', 'lightningd/subd.c:686 (new_peer_subd)', 'lightningd/peer_control.c:2487 (peer_accept_channel)', 'lightningd/peer_control.c:674 (peer_sent_nongossip)', 'lightningd/gossip_control.c:55 (peer_nongossip)', 'lightningd/gossip_control.c:142 (gossip_msg)', 'lightningd/subd.c:477 (sd_msg_read)', 'lightningd/subd.c:319 (read_fds)', 'ccan/ccan/io/io.c:59 (next_plan)', 'ccan/ccan/io/io.c:387 (do_plan)', 'ccan/ccan/io/io.c:397 (io_ready)', 'ccan/ccan/io/poll.c:305 (io_loop)', 'lightningd/lightningd.c:347 (main)', '(null):0 ((null))', '(null):0 ((null))', '(null):0 ((null))'], 'parents': ['lightningd/log.c:103:struct log_book', 'lightningd/lightningd.c:43:struct lightningd']}]
Technically, true, but we save more memory by sharing the prefix pointer
than we lose by leaking it.
However, we'd ideally refcount so it's freed if the log is freed and
all the entries using it are pruned from the log book.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This makes much more sense when you ask for a specific peer's log.
Also, we put the peerid rather than pid ().
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We added code to allow a few spurious failures, but it didn't unmark
the request running.
IRC user 'mlz' (@molxyz) provided logs from his stuck-at-old-block lightningd:
lightningd(31981): Adding block 1261159: 00000000da3890ccd0f313a74fccfd4789654b496836da5c28a8d2ad28852264
lightningd(31981): Adding block 1261160: 00000000f70938a33aecbdd7b047cb5cf5b095ea4770c1335acf1859bad1e767
lightningd(31981): bitcoin-cli -testnet estimatesmartfee 2 CONSERVATIVE exited with status 1
Fixes: #749
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There is an interaction between --ipaddr and --port, namely that the
default port is used when parsing --ipaddr if --port comes after the
--ipaddr, and --port is used if it comes before it. Adding a port to
--ipaddr still trumps everything else, but this way we correctly set
port in the address.
Reported-by: Wladimir J. van der Laan @laanwj
Signed-off-by: Christian Decker <decker.christian@gmail.com>
The JSON connect command wouldn't terminate if peer reconnected
in a state CHANNELD_AWAITING_LOCKIN or above.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Such an htlc is invalid, and will be failed cleanly by our channeld
(which also checks that it meets the minimum amount), but it's
not the master's job to check it, and in fact, it asserts if we were
to try to pay or forward such a thing.
Fixes: #686
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The peer shouldn't try, and channeld won't try to add it if it does,
but we shouldn't trust it. And it would make our htlc_in_check() code
assert.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before this patch:
```
$ lightningd/lightningd
lightningd(PID): Creating lightningd dir /root/.lightning (because chdir gave No such file or directory)
lightningd(PID): Creating database
```
After this patch:
```
$ lightningd/lightningd
lightningd(PID): Creating lightningd dir /root/.lightning
lightningd(PID): Creating database
```
delinvoice was orginally documented to only allow deletion of unpaid
invoices, but there might be reasons to delete paid ones or unexpired ones.
But we have to avoid the race where someone pays as it's deleted: the
easiest way is to have the caller tell us the status, and fail if
it's wrong.
Fixes: #477
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Error code is inverted (which makes sense: who returns 'true' on
error?), and anyway there's a leak if we do error.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're going to have to support multiple channels per peer, even if only
when some are onchain. This would break the current listpeers, so
change it to an array (single element for now).
Other cleanups:
1. Only set connected true if daemon is not onchaind.
2. Only show netaddr if connected; don't make it an array, call it `address`
in comparison with `addresses` in listnodes.
3. Rename `channel` to `short_channel_id`
4. Add `funding_txid` field for voyeurism.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This allows us to add other fields, such as version information,
warnings or invoiceless payments, later.
(Note: the deprecated listinvoice is unchanged)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This matches the other names, and also the return value is about to change.
This will be removed before release!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This can be used for upgrades to make sure you're not using deprecated
options, JSON commands, JSON fields, etc.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For performance, we delay entering the 'wallet_payment' into the db
until we actually commit to the HTLC (when we have to touch the DB
anyway).
This opens a race where we can try to pay twice, and since it's not in
the database yet, we don't notice the duplicate.
So remove the temporary payment field from htlc_out, which was always
an uncomfortable hack, and make the wallet code abstract over the
deferred entry a little by maintaining a 'unstored_payments' list
and incorporating that in results.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need these to decode any returned errors.
We remove it from struct pay_command too, and load directly from db
when we need it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We should be saving this, as it's our proof of payment. Also, we return
it if they try to pay again.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This, of course, should never be used. But it helps maintain connections
for the moment while we dig deeper into feerates.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a common occurence on pruned nodes. By calling the callback
upon failures, we communicate that we couldn't verify the txoutput. We
fail safe rejecting any channel we can't verify.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This means we print out the correct path with --debugger, which
can be vital if there are multiple binaries (eg. compiled vs installed).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
json_get_params does this for us.
Fixes: 78adf0b (pay: allow 'null' msatoshi field.)
Reported-by: ZmnSCPxj
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Pulling up the save call from `peer_save_commitsig_received` into its
caller `peer_got_commitsig` and adding a call to
`peer_sending_commitsig`
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Message buffer `why` is allocated in the `peer` context and also freed when peer is freed.
Only explicitly free the buffer when peer itself is not freed yet.
exit status is not enough to detect spent outputs. gettxout will return a
success exit code and 0 bytes.
Signed-off-by: William Casarin <jb55@jb55.com>
We'll pass this down to gossip and make sure to re-announce/update
channels every so often. This is also used as a pruning timer, i.e.,
channels that have not been updated in 2 x channel-update-interval
will be pruned from the local view.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Since most callers use positional arguments, we should allow a 'null'
literal where we require no value at all.
Also adds some more value tests.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Paid invoices need to know how much was actually paid: both for the case
where no 'msatoshi' amount was specified, and for the normal case, where
clients are permitted to overpay in order to help them disguise their
payments.
While we migrate the db, we leave this field as 0 for old paid
invoices. This is unhelpful for accounting, but at least clearly
indicates what happened if we find this in the wild.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
'rhash' is the old terminology, but 'payment_preimage' and
'payment_hash' were decided on for the BOLTs, so we should fix that here.
We still use rhash internally, but that's much easier to fix.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Different commands (listinvoice, delinvoice, waitinvoice,
waitanyinvoice) returned different fields, as not all were updated.
This makes them uniform.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This reuses the same code internally, and also now means that we deal
correctly with "any" msatoshi invoices: the old code would a return
'msatoshi' of 0 in that case.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The manfile and the online help use 'msatoshi', the returned
response uses 'msatoshi', nearly every invoice-related
monetary amount is labelled 'msatoshi' and not 'amount'.
It would be nice if bitcoind had an RPC to do this in one, but that's
a bit much to ask for. We could also hand around proofs, for lite nodes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. htlc->fail has been changed to a u8 *.
2. wallet_get_newindex saves to the db.
3. peer->next_htlc_id is saved to the db in peer_save_commitsig_sent() below.
4. We do store commit in peer_save_commitsig_received(peer, commitnum),
and the fixme below talks about HTLC sigs.
5. We do commit shachain and next_per_commit_point in wallet_shachain_add_hash
and update_per_commit_point respectively.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
All other users of json_get_params(...) check the return value:
```
lightningd/chaintopology.c: if (!json_get_params(buffer, params,
lightningd/chaintopology.c: if (!json_get_params(buffer, params,
lightningd/dev_ping.c: if (!json_get_params(buffer, params,
lightningd/gossip_control.c: if (!json_get_params(buffer, params,
lightningd/invoice.c: if (!json_get_params(buffer, params,
lightningd/invoice.c: if (!json_get_params(buffer, params,
lightningd/invoice.c: if (!json_get_params(buffer, params,
lightningd/invoice.c: if (!json_get_params(buffer, params,
lightningd/invoice.c: if (!json_get_params(buffer, params, "label", &labeltok, NULL)) {
lightningd/invoice.c: if (!json_get_params(buffer, params,
lightningd/jsonrpc.c: if (!json_get_params(buffer, params,
lightningd/pay.c: if (!json_get_params(buffer, params,
lightningd/pay.c: if (!json_get_params(buffer, params,
lightningd/peer_control.c: if (!json_get_params(buffer, params,
lightningd/peer_control.c: if (!json_get_params(buffer, params,
lightningd/peer_control.c: if (!json_get_params(buffer, params,
lightningd/peer_control.c: if (!json_get_params(buffer, params,
lightningd/peer_control.c: if (!json_get_params(buffer, params,
lightningd/peer_control.c: if (!json_get_params(buffer, params,
wallet/walletrpc.c: if (!json_get_params(buffer, params,
wallet/walletrpc.c: if (!json_get_params(buffer, params, "tx", &txtok, NULL)) {
```
I've only seen this under travis, so I can't verify that this fixes it,
but it's certainly a bug which could cause that issue.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is necessary to grad the their_unilateral/to-us outputs since
they aren't being harvested by `onchaind`
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is the scriptpubkey that onchaind spends all funds to, except for
the their_unilateral/to-us case, so we better recognize that address.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is the only case in which we don't respend to a simple keyindex'd
pubkey, so we need to handle this for future spends.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We always arm the funding_lockin_cb, even if we don't need to. If we
have an short_channel_id already from the db, this was replacing it
and leaking the old one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we panic when we see our root reorg out, even if we're not doing
anything yet, restoring the 100 block margin is the simplest fix.
Unfortunately this means adding a 100-block spacer in the tests, so things
don't get confused.
Fixes: #511
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is surprisingly simple. We set up the watches for funding tx
depth and the funding output, then if it's not onchain we ask gossipd
to reconnect.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Load the first block we're possibly interested in, then load the peers so
we can restore the tx watches, then finally replay to the current tip.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Eventually we want to save blockchain in db to avoid this scan, but
for the moment, we need to reload as far back as we may be interested in.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
ZmnSCPxj
Christian Decker
Rusty Russell
windsok
rvandermeer
practicalswift
Luca Vaccaro
Carl Dong
William Casarin
Ephraim Raj
Björge Dijkstra
Igor Cota