Due to wrong documentation on kmod_module_get_info() we ended up
checking for 0 as return. Check for > 0 to decided if we want to write
the index to the file, otherwise we would output a 0-sized index on
success.
Fix double free for *modinfo with non '\0' terminated wrong
modules.builtin.modinfo, which is because EOF is minus value.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
From kmod_config_new(), when kmod_list_append() fails,
fix not list-appended kmod_config_path leak.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Recently in a discussion I noticed that kernel allows more chars to be
considered as space in the kernel command line. Switch to the equivalent
of isspace() instead of considering only ' '.
Add a new DEFINE_TEST_WITH_FUNC() that accepts the function
alongside the test name. This will allow us to share a single function
for different tests.
It was reported that grub mangles the kernel cmdline. It turns
acpi_cpufreq.dyndbg="file drivers/cpufreq/acpi-cpufreq.c +mpf"
into
"acpi_cpufreq.dyndbg=file drivers/cpufreq/acpi-cpufreq.c +mpf"
However, even though we could blame grub for doing that, the kernel
happily accepts and re-quotes it when the module is built-in.
So, it's better if kmod also understands it this way and does the same.
Here we basically add additional code to un-mangle it, moving the quote
in way that is acceptable to pass through init_module(). Note that the
interface [f]init_module() gives us mandates the quote to be part of the
value: the module name is not passed and the options are separated by
space.
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Tested-by: Jessica Yu <jeyu@kernel.org>
Link: https://bugzilla.suse.com/show_bug.cgi?id=1181111#c10
The handling of spaces and quotes is becoming hard to maintain. Convert
the parser into a state machine so we can check all the states. This
should make it easier to fix a corner case we have right now:
The kernel also accepts a quote before the module name instead of the
value. But this additional is left for later. This is purely an
algorithm change with no behavior change.
Tested-by: Jessica Yu <jeyu@kernel.org>
Since the output needs to be the same, regardless if the module is
compressed, change populate-modules.sh to conditionally compress the
module if that feature is enabled.
This way we can execute the tests with any build-time configuration and
it should still pass.
Suggested-by: Michal Suchánek <msuchanek@suse.de>
Reviewed-by: Michal Suchánek <msuchanek@suse.de>
Tested-by: Michal Suchánek <msuchanek@suse.de>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
For some time I've been maintaining a read-only mirror on github.
I think it's time to allow patches flowing from there besides the
mailing list: I created a new org to host the project:
https://github.com/kmod-project/kmod
Configuration in /etc should have higher prio than /run.
Given how rarely configuration in /run is used with depmod, this is
likely not to cause any problems, even if it's a change in behavior.
Bug reported by Ben Hutchings <ben@decadent.org.uk>:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=970871
Now that the kernel provides module information for potentially
modular code that's actually built-in, it's possible to query these
built-ins with "modinfo -F". However, this doesn't work quite right:
$ modinfo -Flicense e1000e
GPL v2
$ modinfo -Flicense bitrev
name: bitrev
GPL
The Makefile helpfully warns that some tests will fail when
--sysconfdir != /etc, but there are no provisions to easily disable
those. This commit provides an escape hatch.
[ Lucas: add comment detailing the purpose of the field ]
We need a macro indirection for UNIQ to work. Otherwise it won't be
unique at all since it will just append "UNIQ" to the name:
In file included from testsuite/test-init.c:30:
testsuite/testsuite.h:142:27: error: redefinition of ‘stest_load_resourcesUNIQ’
The file is always created and unless we return an error, the temporary
file is renamed to its final destination. All other places write the
index without checking if the index is empty, so just do the same.
Reported-by: Joe Buehler <aspam@cox.net>
kmod_log_null() does not change ctx (does nothing).
Fix warnings
In file included from libkmod/libkmod-index.c:33:
libkmod/libkmod-index.c: In function ‘index_mm_open’:
libkmod/libkmod-index.c:757:6: warning: passing argument 1 of ‘kmod_log_null’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
757 | DBG(ctx, "file=%s\n", filename);
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
idx is allocated in the beginning but it's not freed if there is
a failure after the allocation.
Change the error path: return immediately if idx allocation fails
and then free it in both success and error path at the end.
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
The function allocates array but on building it if get_string()
fails it returns the error leaving the array allocated. The caller
does not care about it in error case either.
Free it to fix memory leak.
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
I changed the style of the hackargs variable in autogen.sh to multiline
because said line was becoming a bit long with the new --with-zstd arg
added.
A previous version of this patch has been running on my two Arch Linux
installations (with an accompanying mkinitcpio patch) for several months
over many kernel updates without any issues.
Any additional testing and/or patch review would of course be appreciated.
Signed-off-by: Torge Matthies <openglfreak@googlemail.com>
When calling kmod_load_resources() we could end up getting a bogus
return value -ENOMEM due to several other reasons, like the index not
existing. Change index_mm_open() to propagate the failure reason so we
can take actions on it or return to the caller.
When we try to lookup a module and builtin.modinfo.bin is missing, we
would do the right thing because the caller was replacing the return
code with 0 (and the list was not modified).
Make it simpler by allowing the caller to check and differentiate the
errors between module not found and index not found.
index_write() relies on fseek/ftell to manage the position to which we
are write and thus needs the file stream to support it.
Right now when trying to write the index to stdout we fail with:
depmod: tools/depmod.c:416: index_write: Assertion `initial_offset >= 0' failed.
Aborted (core dumped)
We have no interest in outputting our index to stdout, so just skip it
like is done with other indexes.
While at it, add/remove some newlines to improve readability.
Reported-by: Yanko Kaneti <yaneti@declera.com>
Fix: b866b2165a ("Lookup aliases in the modules.builtin.modinfo")
Commit ca3bf5d47cec ("iommu/amd: Introduces ivrs_acpihid kernel parameter")
in the kernel introduced an ill-formed kernel parameter, ivrs_acpihid.
The problem is that it may have a dot on the key side:
"ivrs_acpihid[00:14.5]=AMD0020:0". This could potentially trip our
parser of module options, but right now it's working as intended: the
only thing that happens is that after deciding "ivrs_acpihid[00:14" is a
module name, it will fail the underscores() routine and the option will
be ignored from the kmod pov (not kernel's pov since that driver parsers
the kernel command line by itself).
Lucas De Marchi
Seung-Woo Kim
Dave Reisner
Marco d'Itri
Marius Bakke
Shuo Wang
Yauheni Kaliuta
Samanta Navarro
Torge Matthies