This is a minimal fix: we wait until all plugins reply from init before
continuing. Really large or busy nodes can have other things monopolize
lightningd, then the timer goes off and we blame the plugin (which has
responded, we just haven't read it yet!).
The real answer is to have some timeouts only advance when we're idle,
or have them low-priority so we only activate them when we're idle (this
doesn't apply to all timers: some are probably important!). But
this is a minimal fix for -rc3.
Fixes: https://github.com/ElementsProject/lightning/issues/5736
Changelog-Fixed: plugins: on large/slow nodes we could blame plugins for failing to answer init in time, when we were just slow.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And internal changes don't get CHANGELOG entries, so removed
"- Added interactive transaction building routine ([#5287])".
We need to come up with some way of marking rust crate changes,
as it's not immediately obvious what "- cln-plugin" means?
Maybe we switch from JSON-RPC to Control as a more general
prefix?
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The autoclean plugin would assume we have a `resolved_time` which may
not be true for oldish nodes that predate our annotations.
Changelog-None Unreleased change
Reported-by: <@devastgh>
And document support for it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: `getmanfest` response can contain `nonnumericids` to indicate support for modern string-based JSON request ids.
Changelog-Deprecated: Plugins: numeric JSON request ids: modern ones will be strings (see doc/lightningd-rpc.7.md!)
The `optional` keyword was first removed, and then re-added again, and
then it was made into an experimental flag. Come on people, decide
already which one it is...
We had a quadratic check when processing a block, and this just
reduces it to be linear. Combined with the previous fix of adding txs
multiple times, this should speed up block processing considerably.
We were using a quadratic lookup to locate the transactions we
broadcast, so let's use an `htable` instead, allowing for constant
lookups during block processing.
The list of outgoing transactions was growing with every
rebroadcast. Now we just check whether it is already in the list and
don't add it anymore
Changelog-Fixed: ld: Reduce identification of own transactions to not slow down over time, reducing block processing time
Suggested-by: Matt Whitlock <@whitslack>
On testnet I noticed if we can't reach bitcoind for some reason, we'll
keep RBFing our penalty tx ("it didn't go in, RBF harder!!"). Makes
no sense to grossly exceed the amount needed for next block, so simply
cap penalty at 2x "estimatesmartfee 2 CONSERVATIVE".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Ubuntu clang 15.0.2-1 complains:
```
wallet/wallet.c:280:6: error: variable 'i' set but not used
[-Werror,-Wunused-but-set-variable]
int i;
^
wallet/wallet.c:339:6: error: variable 'i' set but not used
[-Werror,-Wunused-but-set-variable]
int i;
^
wallet/wallet.c:4768:9: error: variable 'count' set but not used
[-Werror,-Wunused-but-set-variable]
size_t count;
^
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Ubuntu clang 15.0.2-1 complains:
```
wire/peer_exp_wiregen.c:257:14: error: variable 'i' set but not used [-Werror,-Wunused-but-set-variable]
for (size_t i = 0; *plen != 0; i++) {
^
wire/peer_exp_wiregen.c:1373:14: error: variable 'i' set but not used [-Werror,-Wunused-but-set-variable]
for (size_t i = 0; *plen != 0; i++) {
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were missing the OP_PUSH for the pubkeys, and the spec mentions we
should be using 73 bytes to estimate the witness weight. Effectively
this adds 4 bytes which really just matters in case fees hit the
floor, and computing the weight becomes important.
Changelog-Fixed: onchaind: Witness weight estimations could be slightly lower than the VLS signer
`urllib3` does not ship as built-in with any of the recent python
releases, whereas `urllib` does, and for the uses we have, they are
pretty much identical.
The requests package is preferred, but until installation of python user
dependencies is implemented, sticking with standard modules allows a
frictionless experience.
And make errors gcc-style, so emacs can jump through the automatically.
```
In devtools/reduce-includes.sh line 21:
echo -n "-$LINE"
^-- SC3037 (warning): In POSIX sh, echo flags are undefined.
In devtools/reduce-includes.sh line 25:
echo -n "."
^-- SC3037 (warning): In POSIX sh, echo flags are undefined.
In tools/rel.sh line 6:
prefix=$(printf '%s\n' "${from#$common}" | sed 's@[^/][^/]*@..@g')
^-----^ SC2295 (info): Expansions inside ${..} need to be quoted separately, otherwise they match as patterns.
Did you mean:
prefix=$(printf '%s\n' "${from#"$common"}" | sed 's@[^/][^/]*@..@g')
In tools/rel.sh line 7:
printf '%s\n' "$prefix/${to#$common}"
^-----^ SC2295 (info): Expansions inside ${..} need to be quoted separately, otherwise they match as patterns.
Did you mean:
printf '%s\n' "$prefix/${to#"$common"}"
For more information:
https://www.shellcheck.net/wiki/SC3037 -- In POSIX sh, echo flags are undef...
https://www.shellcheck.net/wiki/SC2295 -- Expansions inside ${..} need to b...
make: *** [Makefile:553: check-shellcheck] Error 123
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is how we put new invoice_requests into the db; this will be used
by a new "invoicerequest" command which replaces "offerout".
The API is now the same as the offers api.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We no longer use offers for "I want to send you money", but we'll use
invoice_requests directly. Create a new table for them, and
associated functions.
The "localofferid" for "pay" and "sendpay" is now "localinvreqid".
This is an experimental-only option, so document the change under
experimental only.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: JSON-RPC: `pay` and `sendpay` `localofferid` is now `localinvreqid`.
We no longer have to refer back to the offer for which we're making
the invoice_request, or to the invoice_request we made for an invoice,
as they are all mirrored (and we check!).
It's clearer to simply look at the object directly.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I know this is an unforgivably large diff, but the spec has changed so
much that most of this amounts to a rewrite.
Some points:
* We no longer have "offer_id" fields, we generate that locally, as all
offer fields are mirrored into invoice_request and then invoice.
* Because of that mirroring, field names all have explicit offer/invreq/invoice
prefixes.
* The `refund_for` fields have been removed from spec: will re-add locally later.
* quantity_min was removed, max == 0 now mean "must specify a quantity".
* I have put recurrence fields back in locally.
This brings us to 655df03d8729c0918bdacac99eb13fdb0ee93345 ("BOLT 12:
add explicit invoice_node_id.")
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Christian Decker
Jesse de Wit
Alex Myers